AAB Amiante Assainissement Bâtiment SA
1400 Yverdon-les-Bains · about 0 km
Specialist in asbestos removal, pollutant remediation, and demolition prior to renovation or transformation projects in French-speaking Switzerland.
amiante-assainissement.chInterior painting · Yverdon-les-Bains

At a glance
Small project
CHF 3'000 – CHF 7'400
Typical project
CHF 5'600 – CHF 13'500
Large project
CHF 9'500 – CHF 22'600
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 40 m² | CHF 3'000 | CHF 7'400 | CHF 100 |
| Typical project | 80 m² | CHF 5'600 | CHF 13'500 | CHF 100 |
| Large project | 140 m² | CHF 9'500 | CHF 22'600 | CHF 100 |
Computed with our estimator for Yverdon-les-Bains (regional factor included), standard finish. Only the project size changes.
Included
Not included
In Yverdon-les-Bains, the federal building register lists 2'992 residential buildings and 15'846 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
68 % built before 1980
Construction year does not reveal past renovations: check the current insulation condition.
60 % · Gas
This distribution describes recorded buildings, not your system's consumption or efficiency.
16.7 % of buildings mix housing with shops or offices.
In Yverdon-les-Bains, RegBL data provides crucial insights for your renovation project. With 1 building officially protected out of 167 known entries, homeowners must engage with municipal authorities early regarding heritage permits. Regarding size, the median house volume is 808 m3 based on the SIA 416 standard, which is vital for calculating insulation or heating requirements. Please note that data coverage is partial, as only 244 houses have been measured out of 1352. Consequently, you should verify your property’s specific dimensions to ensure accurate cost estimations and appropriate planning for your building's scale.
Source : Registre fédéral des bâtiments et des logements (RegBL), OFS, 2026. Existing residential buildings; percentages of recorded values.
Interior renovation is essential to maintain property value, especially in Yverdon-les-Bains where the housing market is strained.3 °C, the local climate demands significant heating, amounting to 2845 heating degree days annually.
Sound walls and quality paint help regulate thermal performance and limit humidity buildup.
Timing is strategic for the optimal drying of materials. Although interiors are protected, the 49 days of frost per year can impact ambient humidity levels.1 °C, making it easier to ventilate rooms without unnecessarily cooling the house.
The success of a painting project in Yverdon-les-Bains relies on the quality of surface preparation, which often accounts for half the labor time. Material selection must be tailored to the room's function.
For humidity-prone areas like kitchens or bathrooms, washable high-resistance paints are recommended. Filling cracks and meticulous sanding are essential steps before applying any paint to ensure a lasting finish.
Furthermore, painting ceilings and walls simultaneously significantly reduces costs associated with floor protection and the setup of scaffolding or ladders.
Depending on the desired grade, one may choose natural paints, matte finishes that hide imperfections, or satin finishes for improved durability.
It is advisable to test shades directly on your walls before finalizing product choices, as natural light varies based on the exposure of each room.
The building stock in Yverdon-les-Bains is diverse and requires a nuanced approach. In older constructions, it is imperative to identify the nature of old paints, which may contain lead, making professional analysis mandatory before sanding.
Buildings constructed before 1990 also present risks related to the presence of asbestos in certain building materials, which must be handled with caution during surface preparation.
For more recent dwellings, priority is often given to insulation and network management. Interior renovation is an opportunity to check the condition of skirting boards and window seals.
The city faces housing market tension, encouraging a focus on intervention durability.
If renovating an older property, ensure paint product compatibility with original substrates, especially if the building has historical architectural significance requiring a respectful approach to materials.
This guide does not establish a permit exemption. If your building or area is protected, check the constraints specific to your project.
It is advisable to regularly consult cantonal and municipal programs to check if incentives have been introduced for sustainable renovations.
Regarding taxation, the municipal tax coefficient in Yverdon-les-Bains is 75. Expenses for maintenance and renovation aimed at preserving property value are generally deductible from your taxable income.
It is mandatory to keep all detailed invoices from service providers to justify these deductions to the tax authorities. For more complex projects, verify the specific conditions for these deductions in the Canton of Vaud before starting work.
The typical workflow for a painting project begins with an accurate assessment of the surfaces to be treated, followed by the protection of furniture and floors.
Once the space is clear, the preparation stage—including cleaning, sanding, and filling holes—is crucial for finish quality. This phase requires rigor and patience to obtain a sound substrate before applying the primer.
Paint application then proceeds in two coats, respecting drying times between each step, which depends heavily on indoor humidity and temperature. Ideally, favor temperate periods to allow for effective room ventilation.
Finally, the project concludes with meticulous cleaning and the removal of protections. If working on older buildings in Yverdon-les-Bains, allow an extra margin in your schedule for any unexpected findings beneath old layers of paint.
The most common error is neglecting surface preparation, which compromises the work's durability. Never apply paint to a damp or dusty wall.
Before requesting quotes in Yverdon-les-Bains, ensure you draw up an accurate list of rooms to paint, surfaces (walls and ceilings), and any defects to be repaired. It is also recommended to check the condition of skirting boards and door frames.
Checklist : List the affected rooms. Identify areas requiring specific repairs (cracks, holes). Verify the existence of old suspicious paints (lead). Define your expectations in terms of finish. Plan to empty the rooms before the artisans arrive.
Ask providers for local references. Compare quotes based on an identical description for each company. By following these steps, you will greatly facilitate your artisan's work and ensure the clarity of the proposals received.
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
No specific grant listed for this work. Maintenance tax deductions may still apply.
1400 Yverdon-les-Bains · about 0 km
Specialist in asbestos removal, pollutant remediation, and demolition prior to renovation or transformation projects in French-speaking Switzerland.
amiante-assainissement.ch1400 Yverdon-les-Bains · about 0 km
Company based in Yverdon-les-Bains specializing in painting, plastering, and interior and exterior renovation projects for individuals.
art-paint-sarl.ch1400 Yverdon-les-Bains · about 0 km
Renovation company based in Yverdon-les-Bains, specializing in plastering, painting, plastering, and interior partition wall installation.
cako-renovation.ch1400 Yverdon-les-Bains · about 0 km
DH Plâtrerie-Peinture Sàrl in Yverdon provides renovation, painting, facade, flooring, and micro-cement bathroom services throughout the Canton of Vaud.
dh-batiment.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
No, for standard interior work, no authorization is needed. However, verify your building's status in case of heritage protection.
Yes, always test a small area. Natural light varies between rooms and changes the final rendering.
Generally, two coats are necessary for a uniform result. Surface preparation is critical for adhesion.
Verify the presence of asbestos or lead. Have a professional perform an analysis before any sanding.
Yes, maintenance expenses for preserving value are deductible. Keep your detailed invoices carefully to justify these amounts.
Spring or autumn are ideal. These seasons allow for ventilation without enduring extreme winter temperatures.
Yes, it reduces floor protection costs and installation setup. It also optimizes project logistics.