Facade insulation — Fribourg
Contribution per insulated m².
Fribourg support for thermal insulation of facades and roofs.
www.leprogrammebatiments.chRoof renovation · Murten

At a glance
Small project
CHF 15'200 – CHF 34'900
Typical project
CHF 27'500 – CHF 60'700
Large project
CHF 46'000 – CHF 99'400
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 70 m² | CHF 15'200 | CHF 34'900 | CHF 300 |
| Typical project | 140 m² | CHF 27'500 | CHF 60'700 | CHF 300 |
| Large project | 245 m² | CHF 46'000 | CHF 99'400 | CHF 300 |
Computed with our estimator for Murten (regional factor included), standard finish. Only the project size changes.
Included
Not included
In Murten, the federal building register lists 2'115 residential buildings and 4'731 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
53 % built before 1980
Construction year does not reveal past renovations: check the current insulation condition.
45 % · Heat pump
This distribution describes recorded buildings, not your system's consumption or efficiency.
| Energy | Heating | Hot water |
|---|---|---|
| Gas | 2 % | 1.6 % |
| Heating oil | 33 % | 24.6 % |
| District heating | 9 % | 8.2 % |
| Heat pump | 45 % | 28.3 % |
| Electricity | 4 % | 32.6 % |
| Wood | 7 % | 3.6 % |
| Solar thermal | 0 % | 1.1 % |
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
A standard non-condensing boiler is usually older and less efficient.
17.7 % of buildings mix housing with shops or offices.
When planning renovations in Murten, official building register data provides useful guidance, though coverage remains partial. The median building volume is 870 cubic meters, a critical metric for scaling heating systems or insulation upgrades. However, please note that this figure is derived from only 16 properties measured according to SIA 416 standards out of 1302 total residential buildings. Because the data set is limited, you should verify your property's specific volume dimensions early in the planning process to ensure that your renovation cost estimates are accurate and tailored to the actual structural scale of your home.
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
A successful renovation begins with an assessment of your roof's current condition. In Murten, climatic conditions require special attention, especially if your building is located in an area with heavy snow loads and frost.
Consider integrating thermal insulation when replacing the roof covering to optimize your energy performance.
If your roof already has solar panels, it is essential to budget for their removal and reinstallation by qualified professionals to avoid any structural or electrical damage during the work.
Furthermore, insulating the roof while covering it is often a condition for eligibility for the Buildings Programme. We recommend that you check the specific conditions for these subsidies before work begins to maximize your financial support.
RenoIndex helps you visualize these costs to simplify your administrative tasks.
According to the Fribourg Cantonal Tax Administration, you can deduct investments related to renewable energy, energy efficiency improvements, and environmental protection.
For buildings over 10 years old, you can choose between deducting actual costs or a flat rate of 20% of the rental value. If your deductible expenses exceed your property income, the excess can be carried forward to the following two tax periods.
These measures significantly facilitate the financing of your roof renovation project in Murten over the long term.
Budget planning is the most delicate step. To avoid unpleasant surprises, it is essential to use reference tools before requesting quotes from local companies. RenoIndex offers a free estimate in the form of a price range, based on market standards.
This allows you to validate the feasibility of your project while considering your own financial capacity. Whether you are planning complete insulation or a simple tile replacement, our tool guides you to compare quotes efficiently and professionally.
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
Contribution per insulated m².
Fribourg support for thermal insulation of facades and roofs.
www.leprogrammebatiments.chCheck amounts and conditions with the provider before signing: apply before work starts in most cases.
3280 Murten · about 0 km
Hubschmied AG is a specialist company for roofing and sheet metal work based in Murten.
hubschmied-ag.ch3280 Murten · about 0 km
A&E Rohrreinigung provides pipe and sewer cleaning, inspection, and trenchless rehabilitation, as well as roof, facade, and terrace cleaning services and aerial platform rentals.
kanalreinigung-murten.ch3280 Murten · about 0 km
Baeriswyl AG is a company specializing in roofing, tinsmithing, and facade construction services.
baeriswyl-ag.ch1788 Praz (Vully) · about 2.6 km
Bilingual company serving Vully and the surrounding area, specialising in timber roof structures, roof coverings, timber-frame construction and renovation.
guillod.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
The canton of Fribourg offers subsidies for the thermal insulation of facades and roofs. The amount is paid as a contribution per insulated m². It is advisable to consult the cantonal guidelines for precise conditions before starting your work.
In the canton of Fribourg, you can deduct energy efficiency and environmental protection costs. For buildings over 10 years old, you can choose a flat rate of 20% of the rental value or deduct actual costs. Excess can be carried forward for two years.
Yes, it is highly recommended. Insulating the roof at the same time as covering it is often a condition for benefiting from Buildings Programme grants. This optimizes energy performance and leads to substantial long-term savings while increasing the value of your property.
Costs vary depending on the surface, chosen materials, and existing solar panels. To get a realistic price range, we invite you to use the free RenoIndex simulator. This will help you plan your budget precisely according to your specific project needs.
These rules apply across the whole canton, not only in this town.
Tax deductions
Source : Administration Cantonale des Impôts du Canton de Fribourg