F. Imeri Sàrl
2829 Vermes · about 115 km
The website presented under the name Imeri Chauffage et Sanitaire Sàrl offers plumbing, heating and solar thermal work, while F. Imeri Sàrl’s registered purpose refers to a scrap metal business.
imeri-sarl.chHeat pump installation · Sirnach
Heat pump installation in Sirnach: A practical guide
Are you considering installing a heat pump in Sirnach? This smart choice improves energy efficiency while lowering long-term costs. Whether renovating an old building or building a new home, switching to renewable energy is a key step. To plan your project better and anticipate expenses, we recommend using the free RenoIndex estimator. Get an accurate cost estimate in Swiss francs for your specific installation without delay and begin your energy transition with confidence and expert planning support.
At a glance
- Typical budget
- CHF 42'400 – CHF 78'900
- Midpoint
- CHF 59'300
- Grants found
- 0
- Nearby companies
- 4
Worked examples in Sirnach
Small project
CHF 33'500 – CHF 61'400
Typical project
CHF 42'400 – CHF 78'900
Large project
CHF 55'600 – CHF 105'200
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 80 m² | CHF 33'500 | CHF 61'400 | CHF 600 |
| Typical project | 160 m² | CHF 42'400 | CHF 78'900 | CHF 400 |
| Large project | 280 m² | CHF 55'600 | CHF 105'200 | CHF 300 |
Computed with our estimator for Sirnach (regional factor included), standard finish. Only the project size changes.
Cost split (typical project)
- Labour : CHF 23'700 (40 %)
- Materials : CHF 29'600 (50 %)
- Other costs : CHF 5'900 (10 %)
What the price covers
Included
- Supply and installation
- VAT
- Heat pump and standard connections; removal and equipment only according to answers
Not included
- Permits and architect fees
- Unexpected structural issues
- Possible subsidies
- Drilling beyond 150 m, buried or contaminated tank, asbestos, insulation and new finishes
- With air-to-air: hot water and ducts only if selected; adaptations beyond the options excluded
Sirnach's housing stock in figures
In Sirnach, the federal building register lists 1'658 residential buildings and 3'928 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
Age of residential buildings
51 % built before 1980
- Before 191917 %
- 1919–19457 %
- 1946–19607 %
- 1961–19708 %
- 1971–198012 %
- 1981–199010 %
- 1991–200014 %
- 2001–201013 %
- Since 201113 %
Construction year does not reveal past renovations: check the current insulation condition.
Main heating energy
38 % · Gas
- Gas38 %
- Heating oil28 %
- Heat pump26 %
- Wood6 %
- District heating1 %
- Electricity1 %
This distribution describes recorded buildings, not your system's consumption or efficiency.
Heating and hot water: which energies?
| Energy | Heating | Hot water |
|---|---|---|
| Gas | 38 % | 34.6 % |
| Heating oil | 28 % | 25 % |
| District heating | 1 % | 0.6 % |
| Heat pump | 26 % | 13.4 % |
| Electricity | 1 % | 18.3 % |
| Wood | 6 % | 2.9 % |
| Solar thermal | 0 % | 4.7 % |
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
Type of heating system
- Boiler (unspecified)69.2 %
- Heat pump26.1 %
- Condensing boiler1.5 %
- Central electric heating1.3 %
- Stove1 %
- Heat exchanger (district)0.7 %
A standard non-condensing boiler is usually older and less efficient.
Renovations, heritage and volumes
For your renovation plans in Sirnach, the federal building register provides key figures to consider. While data on renovation years is unavailable, the median house volume is 481.5 m3, which is critical for scaling heating and insulation upgrades. Please note that data coverage is partial, with only four buildings measured under the SIA 416 standard. Regarding heritage protection, there are no recorded protected buildings in the register. Even so, we advise contacting the municipality early in your planning process to discuss any local permit requirements or building constraints that may apply to your specific property and project scope.
0
buildings flagged as protected
status known for 253 of 1'658 buildings; check with the municipality
481.5 m³
median house volume (SIA 416)
measured for 4 of 1'180 houses
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
Check for district heating connection
Before starting your journey toward a heat pump, it is essential to check if your area can connect to a priority district heating network. In many areas, urban heating networks are preferred due to their reduced environmental impact.
Consult local municipal master plans to see if your plot is in a designated service zone.
If a connection is feasible, it can be a simpler and more efficient alternative than an individual heat pump, sparing you the technical constraints and space requirements involved in installing an outdoor unit on your property.
Optimizing heat pump capacity
The capacity of your future heat pump depends directly on the local design outdoor temperature. This parameter is crucial to ensure your system provides enough heat during the coldest days of the year.
An under-dimensioned pump will fail to keep your home comfortable, while an oversized unit will lead to unnecessary power consumption. A qualified professional must perform a full thermal calculation for your building.
Use the RenoIndex estimator to get an initial price range and refine your project with local experts who can interpret these regional climate data for your specific home.
Compliance with local noise standards
Installing air-water heat pumps with an outdoor unit requires special attention to noise. These systems must meet noise limits towards neighbours to avoid any disturbances.
When planning in Sirnach, it is recommended to choose a location away from bedroom windows and property boundaries. If space is limited, sound attenuation measures such as soundproof enclosures or noise barriers can be considered.
RenoIndex allows you to estimate costs including these potential extra components. Always take time to discuss the placement with your neighbours to maintain good relations.
Budget planning and RenoIndex
Budgeting for a heat pump installation can seem complex due to the many technical variables involved. Beyond the cost of the unit itself, you must account for installation fees, drilling costs if necessary, and adjustments to your heating distribution system.
RenoIndex offers a simple solution to get a free price range tailored to the Swiss market.
By entering your building's characteristics, you receive a clear estimate that helps you discuss options with local installers and secure your financing before starting the work.
Your project in 5 steps
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
Grants and subsidies
No specific grant listed for this work. Maintenance tax deductions may still apply.
Companies in the area
Hallenbarter & Russi Gebäudetechnik AG
3988 Obergoms · about 118 km
Obergoms-based company specializing in sanitary installations, heating systems, roofing, and tinsmith work for new builds and renovations.
hallenbarter-russi.chSanit & Bilat Fils S.A.
2824 Vicques · about 118.9 km
Specialist since 1968 in sanitary installations, heating (gas, oil, wood, renewable energy), and tinsmithing with 24/7 emergency repair service.
sanit.chBuchwalder Sàrl
2824 Vicques · about 118.9 km
Buchwalder Sàrl in Vicques has specialized in the installation, repair, and renovation of heating and sanitary systems since 1966.
buchwalder-sarl.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
Frequently asked questions
How can I get a reliable quote in Sirnach?
Use the RenoIndex estimator to get an approximate price range. Then, contact several certified local companies to compare detailed quotes based on your specific needs. Ensure they take technical aspects and local noise standards into account when providing their assessment.
What factors influence the price of a heat pump?
The pump type (air-water, geothermal), required power, adaptation work for the existing heating system, and noise reduction measures are the main factors. Use RenoIndex to estimate the total costs for your project efficiently.
Do I need a permit to install a heat pump?
Generally, installing a heat pump requires notification or a permit from your municipality. Verify specific requirements with the local authorities in Sirnach before starting any installation work.
What is the average lifespan of a heat pump?
A well-maintained heat pump generally has a lifespan of 15 to 20 years. Regular maintenance by a professional is essential to ensure system efficiency and extend its longevity.
Works often combined in Sirnach
Other works in Sirnach
Kitchen renovationBathroom renovationNew flooringInterior paintingWindow replacementRoof renovationFacade insulationSolar panelsHome solar batterySolar water heatingTerrace constructionFence installationStairwell renovationElevator installation or upgrade