Heat pump installation · Romanshorn

Heat pump installation in Romanshorn: A complete guide

Switching to a heat pump in Romanshorn is a smart choice to improve your energy efficiency while increasing your property value. This guide walks you through the key stages of your project, from system selection to local technical requirements. Before starting any work, it is essential to understand your building's specifics and plan an appropriate budget. Use our free RenoIndex estimator to get a reliable cost range for your specific project in just a few clicks for better planning.
Heat pump installation – Romanshorn

At a glance

Typical budget
CHF 42'400 – CHF 78'900
Midpoint
CHF 59'300
Grants found
0
Nearby companies
4

Worked examples in Romanshorn

Small project

CHF 33'500 – CHF 61'400

Typical project

CHF 42'400 – CHF 78'900

Large project

CHF 55'600 – CHF 105'200

ProjectQuantityLowHigh
Small project80 m²CHF 33'500CHF 61'400
Typical project160 m²CHF 42'400CHF 78'900
Large project280 m²CHF 55'600CHF 105'200

Computed with our estimator for Romanshorn (regional factor included), standard finish. Only the project size changes.

Cost split (typical project)

  • Labour : CHF 23'700 (40 %)
  • Materials : CHF 29'600 (50 %)
  • Other costs : CHF 5'900 (10 %)

What the price covers

Included

  • Supply and installation
  • VAT
  • Heat pump and standard connections; removal and equipment only according to answers

Not included

  • Permits and architect fees
  • Unexpected structural issues
  • Possible subsidies
  • Drilling beyond 150 m, buried or contaminated tank, asbestos, insulation and new finishes
  • With air-to-air: hot water and ducts only if selected; adaptations beyond the options excluded

Romanshorn's housing stock in figures

In Romanshorn, the federal building register lists 2'023 residential buildings and 5'983 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.

65 %built before 1980
63 %heated by oil or gas
19.1 %electric hot water
5.3 %with declared solar thermal

Age of residential buildings

65 % built before 1980

  • Before 191925 %
  • 1919–194512 %
  • 1946–196012 %
  • 1961–19708 %
  • 1971–19808 %
  • 1981–19908 %
  • 1991–20008 %
  • 2001–20109 %
  • Since 201111 %

Construction year does not reveal past renovations: check the current insulation condition.

Main heating energy

34 % · Gas

  • Gas34 %
  • Heating oil29 %
  • Heat pump29 %
  • Wood6 %
  • Electricity2 %
  • District heating1 %

This distribution describes recorded buildings, not your system's consumption or efficiency.

Heating and hot water: which energies?

EnergyHeatingHot water
Gas34 %31 %
Heating oil29 %24.1 %
District heating1 %0.9 %
Heat pump29 %17.8 %
Electricity2 %19.1 %
Wood6 %1.9 %
Solar thermal0 %5.1 %

Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.

Type of heating system

  • Boiler (unspecified)66.1 %
  • Heat pump28.7 %
  • Stove1.5 %
  • Central electric heating1.4 %
  • Heat exchanger (district)1.1 %
  • Condensing boiler0.9 %

A standard non-condensing boiler is usually older and less efficient.

Renovations, heritage and volumes

For homeowners planning renovations in Romanshorn, official RegBL figures provide vital context. Data coverage regarding building volume is partial, with seven houses measured under the SIA 416 standard showing a median volume of 830 m3, which helps gauge the scale of necessary heating or insulation work. Regarding heritage protection, out of 2023 registered buildings, 278 are known, with zero recorded as protected. We recommend contacting the municipality early in your planning process to confirm your property's specific status, as this ensures all local permit requirements are fully addressed before you begin any construction projects.

0
buildings flagged as protected
status known for 278 of 2'023 buildings; check with the municipality
830 m³
median house volume (SIA 416)
measured for 7 of 1'209 houses

Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.

Checking the district heating network

Before starting the process for a heat pump, first check if your residential area in Romanshorn can be connected to a district heating network.

This type of connection is often prioritized by authorities in dense neighborhoods as an ecological and efficient heating alternative. If such an option exists, it might be more advantageous or even required by local zoning plans.

Performing an initial check with the municipality or technical services will prevent you from investing in technology that might not be the optimal solution for your sector.

Technical sizing based on needs

The success of your installation depends largely on precise sizing. In Romanshorn, as everywhere in Switzerland, the local design outdoor temperature is the determining factor for calculating the necessary power of your heat pump.

An under-dimensioned unit will fail to heat properly during cold peaks, while an over-dimensioned one will lead to unnecessary consumption and premature wear.

A qualified professional must carry out an analysis of your actual energy needs, taking into account your home's current insulation, to guarantee comfort and long-term energy savings.

Compliance with local noise regulations

Consider orienting the fans away from your neighbors' windows and installing acoustic barriers or vibration reduction devices if necessary.

Rigorous planning from the start will prevent unnecessary neighbor disputes and allow you to enjoy your new silent heating system in peace.

Budget and cost estimation

The cost of a heat pump varies significantly depending on the chosen model, the complexity of the installation, and the necessary renovation work on your current heat distribution system.

In Romanshorn, it is advisable to request several comparative quotes to get the best value for money. To facilitate this step, use our free RenoIndex simulator which will provide you with a realistic price range adapted to your project.

Remember that the initial investment is offset by a significant drop in your energy bills in the long run while increasing the resale value of your property.

Your project in 5 steps

  1. 1. Estimate

    Set a budget range with the estimator.

  2. 2. Grants

    Apply before work starts.

  3. 3. Quotes

    Compare at least 3 quotes.

  4. 4. Permit

    Check with the municipality whether a permit is needed.

  5. 5. Works

    Follow the site and do a written handover.

Grants and subsidies

No specific grant listed for this work. Maintenance tax deductions may still apply.

Companies in the area

Hallenbarter & Russi Gebäudetechnik AG

3988 Obergoms · about 144.2 km

Obergoms-based company specializing in sanitary installations, heating systems, roofing, and tinsmith work for new builds and renovations.

hallenbarter-russi.ch

F. Imeri Sàrl

2829 Vermes · about 146.1 km

The website presented under the name Imeri Chauffage et Sanitaire Sàrl offers plumbing, heating and solar thermal work, while F. Imeri Sàrl’s registered purpose refers to a scrap metal business.

imeri-sarl.ch

Sanit & Bilat Fils S.A.

2824 Vicques · about 149.7 km

Specialist since 1968 in sanitary installations, heating (gas, oil, wood, renewable energy), and tinsmithing with 24/7 emergency repair service.

sanit.ch

Buchwalder Sàrl

2824 Vicques · about 149.7 km

Buchwalder Sàrl in Vicques has specialized in the installation, repair, and renovation of heating and sanitary systems since 1966.

buchwalder-sarl.ch

Suggestions from the commercial register by distance and activity. Not an endorsement or partnership.

Frequently asked questions

Do I need a building permit in Romanshorn?

Generally, installing a heat pump requires a permit in most municipalities. It is highly recommended to contact the urban planning department in Romanshorn to find out about specific requirements, particularly regarding compliance with boundary distances and local noise regulations for outdoor units.

How can I estimate the budget for my work?

To get a quick and free estimate, use the RenoIndex online simulator. It allows you to define a precise price range based on your situation in Romanshorn, taking into account the common technical specifications for heat pump installations in Switzerland.

Are grants available?

The availability of financial aid varies regularly. We recommend checking the national website www.leprogrammebatiments.ch to verify current grants applicable in the canton of Thurgau. Subsidies can vary depending on the efficiency of the system and the comprehensive renovation measures undertaken.

Is the heat pump noisy for my neighbors?

A modern heat pump is relatively quiet, but the outdoor unit can generate noise. By respecting placement guidelines and installing sound insulation devices, you ensure your neighbors' peace and remain in compliance with the rules currently in force in the canton.

Works often combined in Romanshorn

Other works in Romanshorn

Heat pump installation in nearby towns