Solar water heating · Maur
At a glance
Small project
CHF 10'300 – CHF 24'100
Typical project
CHF 13'200 – CHF 30'700
Large project
CHF 18'200 – CHF 41'800
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 3 m² | CHF 10'300 | CHF 24'100 | CHF 5'600 |
| Typical project | 6 m² | CHF 13'200 | CHF 30'700 | CHF 3'500 |
| Large project | 11 m² | CHF 18'200 | CHF 41'800 | CHF 2'600 |
Computed with our estimator for Maur (regional factor included), standard finish. Only the project size changes.
Included
Not included
In Maur, the federal building register lists 2'209 residential buildings and 4'980 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
55 % built before 1980
Construction year does not reveal past renovations: check the current insulation condition.
53 % · Heating oil
This distribution describes recorded buildings, not your system's consumption or efficiency.
| Energy | Heating | Hot water |
|---|---|---|
| Gas | 5 % | 4.9 % |
| Heating oil | 53 % | 44.7 % |
| District heating | 1 % | 0.8 % |
| Heat pump | 31 % | 6.5 % |
| Electricity | 4 % | 32.7 % |
| Wood | 6 % | 3.4 % |
| Solar thermal | 0 % | 4.9 % |
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
A standard non-condensing boiler is usually older and less efficient.
8.7 % of buildings mix housing with shops or offices.
For your renovation projects in Maur, the official building register provides essential reference points. The median building volume stands at 1163 m3, which serves as a key indicator for scaling your future heating or insulation improvements. Please note that these volume figures are based on a limited sample size of only 12 buildings measured according to SIA 416 standards, indicating partial data coverage. Since information regarding renovation years and heritage protection is not recorded in the register, you should consult the municipality directly early in your planning phase to clarify any potential restrictions or requirements for your specific property.
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
Installing solar thermal collectors in Maur offers a major advantage: reducing your reliance on fossil fuels.
In general, solar thermal collectors cover a large part of your domestic hot water needs during the summer, allowing your main heating system to remain idle. This proven technology provides stable long-term profitability while increasing your property value.
To evaluate the actual cost of such an installation, visit RenoIndex, which offers a free estimator tool to obtain a clear price range for your local project.
An efficient system requires a thorough study of your consumption and roof. If you plan to combine collectors with a heat pump, a rigorous sizing study is essential to ensure optimal synergy between the technologies.
A poor configuration could limit system performance. It is recommended to hire local professionals to assess your roof's capacity in Maur.
To anticipate your overall budget, our RenoIndex platform allows you to estimate project costs and quickly obtain a reliable price range.
Investing in renewable energy in Maur is encouraged through various financial aids. Several cantons subsidise solar collectors per square meter or per installation to support the energy transition.
It is crucial to check the eligibility conditions before starting your work, as programs may vary according to the regulations of the canton of Zurich. These grants significantly reduce your initial investment.
To get a clear view of your budget after subsidies, use the RenoIndex estimator to receive a realistic price range for your energy renovation.
To ensure the longevity of your solar system in Maur, regular maintenance is required. Although the system is low-maintenance, it is advisable to regularly check the state of heat transfer fluids and the operation of circulation pumps.
A well-maintained system ensures constant performance throughout the year. Do not wait for a breakdown to act; schedule inspections with a qualified installer. If you are planning other renovations, use RenoIndex to budget your project.
Our online tool provides a reliable price range to plan your investments with confidence.
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
No specific grant listed for this work. Maintenance tax deductions may still apply.
2829 Vermes · about 89.5 km
The website presented under the name Imeri Chauffage et Sanitaire Sàrl offers plumbing, heating and solar thermal work, while F. Imeri Sàrl’s registered purpose refers to a scrap metal business.
imeri-sarl.ch2824 Vicques · about 93.9 km
Buchwalder Sàrl in Vicques has specialized in the installation, repair, and renovation of heating and sanitary systems since 1966.
buchwalder-sarl.ch2824 Vicques · about 93.9 km
Specialist since 1968 in sanitary installations, heating (gas, oil, wood, renewable energy), and tinsmithing with 24/7 emergency repair service.
sanit.ch2824 Vicques · about 93.9 km
Gyger Haustechnik specializes in sanitary installations, heating systems, bathroom renovations, and tiling work.
gyger-co.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
Quality solar thermal collectors generally have a lifespan of 20 to 25 years. Regular maintenance and the occasional replacement of components, such as heat transfer fluids, help maintain optimal efficiency throughout this period. Use RenoIndex to estimate the costs associated with your installation.
Yes, collectors work even in winter if solar radiation is present, although their output decreases compared to summer. They then serve as support for preheating water. For a personalized analysis of yields and costs in Maur, consult our free estimator on RenoIndex.
Planning regulations may vary. It is advisable to contact the relevant authorities before starting. To budget your project including any administrative fees, RenoIndex helps you get a realistic price range for your renovation and energy installation works.
Yes, coupling with an existing heating system is quite possible and common. This does, however, require a suitable hot water tank. To get a cost estimate for these adaptation works in Maur, use our free RenoIndex tool.
