Canton
Facade insulation — Valais
Contribution per m² depending on requirements met.
Valais support for envelope insulation via the Buildings Programme.
www.leprogrammebatiments.chRoof renovation · Naters
Roof renovation in Naters
Indicative price, tips, grants and companies for your project in Naters (Valais).
At a glance
- Typical budget
- CHF 27'500 – CHF 60'700
- Midpoint
- CHF 41'600
- Grants found
- 1
- Nearby companies
- 4
Worked examples in Naters
Small project
CHF 15'200 – CHF 34'900
Typical project
CHF 27'500 – CHF 60'700
Large project
CHF 46'000 – CHF 99'400
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 70 m² | CHF 15'200 | CHF 34'900 | CHF 300 |
| Typical project | 140 m² | CHF 27'500 | CHF 60'700 | CHF 300 |
| Large project | 245 m² | CHF 46'000 | CHF 99'400 | CHF 300 |
Computed with our estimator for Naters (regional factor included), standard finish. Only the project size changes.
Cost split (typical project)
- Labour : CHF 20'800 (50 %)
- Materials : CHF 16'700 (40 %)
- Other costs : CHF 4'200 (10 %)
What the price covers
Included
- Supply and installation
- VAT
- Covering, scaffolding, insulation and removal according to answers
Not included
- Permits and architect fees
- Unexpected structural issues
- Possible subsidies
- New roof structure, asbestos, roof windows and structural reinforcement
Naters's housing stock in figures
In Naters, the federal building register lists 2'731 residential buildings and 7'572 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
Age of residential buildings
58 % built before 1980
- Before 191919 %
- 1919–19455 %
- 1946–19607 %
- 1961–197012 %
- 1971–198015 %
- 1981–199013 %
- 1991–200010 %
- 2001–20108 %
- Since 201111 %
Construction year does not reveal past renovations: check the current insulation condition.
Main heating energy
30 % · Heating oil
- Heating oil30 %
- Electricity27 %
- Wood21 %
- Heat pump19 %
- Solar thermal2 %
- Gas1 %
- District heating1 %
This distribution describes recorded buildings, not your system's consumption or efficiency.
Heating and hot water: which energies?
| Energy | Heating | Hot water |
|---|---|---|
| Gas | 1 % | 0.7 % |
| Heating oil | 30 % | 24.4 % |
| District heating | 1 % | 0.3 % |
| Heat pump | 19 % | 4.9 % |
| Electricity | 27 % | 57.4 % |
| Wood | 21 % | 5.4 % |
| Solar thermal | 2 % | 6.5 % |
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
Type of heating system
- Boiler (unspecified)43.5 %
- Central electric heating24.7 %
- Heat pump18.6 %
- Stove7.6 %
- Direct electric heaters2.4 %
- Heat exchanger (district)0.7 %
A standard non-condensing boiler is usually older and less efficient.
Houses or apartment buildings?
- Single-family houses56.2 %
- Two-dwelling houses20.3 %
- Apartment buildings (3+)23.5 %
- Other0 %
5.4 % of buildings mix housing with shops or offices.
The typical building
- storeys (median)
- 2
- median footprint
- 98 m²
- median dwelling area
- 95 m²
Renovations, heritage and volumes
For renovation planning in Naters, federal building registry data provides essential context. Regarding building volume, the median is 769 m3 per SIA 416 standards, though this reflects measurements for only 43 out of 1534 houses, indicating partial data coverage. Concerning heritage protection, no buildings are currently designated as protected among the 370 known cases, while the status for 2361 units remains unknown. Given these gaps in recorded data, we strongly recommend contacting the municipality early in your project phase to confirm specific regulatory requirements or architectural restrictions before finalizing your insulation and heating upgrade plans.
0
buildings flagged as protected
status known for 370 of 2'731 buildings; check with the municipality
769 m³
median house volume (SIA 416)
measured for 43 of 1'534 houses
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
Tips before you start
- Insulating the roof together with the covering is often eligible for the Buildings Programme.
- Existing solar panels must be removed and refitted: budget for it.
- At altitude, snow loads and frost influence material choice.
Your project in 5 steps
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
Grants and subsidies
Check amounts and conditions with the provider before signing: apply before work starts in most cases.
Companies in the area
Schaller & Studer GmbH
3904 Naters · about 6.2 km
Schaller & Studer GmbH specializes in sheet metal work, roofing services, and the installation of roof windows.
schaller-studer.chAS Gerüste AG
3900 Gamsen · about 11 km
AS Gerüste AG, part of the Schaller Group, is a Valais-based company specializing in scaffolding assembly for various construction projects.
schallergroup.chIBEXtec GmbH
3900 Brig · about 11 km
Valais-based rope access specialist performing maintenance, cleaning, and repairs on hard-to-reach roofs and facades.
ibextec.chFrutiger AG
3930 Visp · about 13.3 km
Frutiger AG is one of the largest construction companies in Switzerland, specializing in civil engineering, building construction, and comprehensive real estate solutions.
frutiger.comSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
Works often combined in Naters
Other works in Naters
Kitchen renovationBathroom renovationNew flooringInterior paintingWindow replacementFacade insulationHeat pump installationSolar panelsHome solar batterySolar water heatingTerrace constructionFence installationStairwell renovationElevator installation or upgrade