Heat pump installation · Muri (AG)
At a glance
Small project
CHF 30'000 – CHF 54'800
Typical project
CHF 37'800 – CHF 70'500
Large project
CHF 49'600 – CHF 93'900
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 80 m² | CHF 30'000 | CHF 54'800 | CHF 500 |
| Typical project | 160 m² | CHF 37'800 | CHF 70'500 | CHF 300 |
| Large project | 280 m² | CHF 49'600 | CHF 93'900 | CHF 300 |
Computed with our estimator for Muri (AG) (regional factor included), standard finish. Only the project size changes.
Included
Not included
In Muri (AG), the federal building register lists 1'559 residential buildings and 4'119 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
43 % built before 1980
Construction year does not reveal past renovations: check the current insulation condition.
43 % · Heating oil
This distribution describes recorded buildings, not your system's consumption or efficiency.
| Energy | Heating | Hot water |
|---|---|---|
| Heating oil | 43 % | 28.6 % |
| District heating | 12 % | 3.7 % |
| Heat pump | 33 % | 6.3 % |
| Electricity | 5 % | 54.2 % |
| Wood | 7 % | 4.3 % |
| Solar thermal | 0 % | 2.6 % |
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
A standard non-condensing boiler is usually older and less efficient.
For your renovation projects in Muri, federal building register data provides essential guidance. With 372 buildings under heritage protection, it is vital to contact the municipality early to clarify permit requirements before starting any work. The median house volume is 904 m3, a key figure for scaling future heating systems or insulation upgrades effectively. Please note that the data coverage for volume measured according to the SIA 416 standard remains very partial, as the vast majority of the 1015 houses listed are recorded under other standards or are currently classified as unknown.
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
The choice of your system depends largely on your building's configuration and your land. In Muri, the local design outdoor temperature is crucial for determining the necessary capacity of your heat pump.
Correctly dimensioning the unit is essential to ensure optimal efficiency throughout the winter.
Consult the free RenoIndex estimator to get a reliable price estimate tailored to your situation, based on your home's technical characteristics and your heating requirements.
Poor placement can lead to noise pollution and conflicts. Ensure you study the optimal location to minimize sound impact. If in doubt, a professional acoustic assessment may be required to validate your project before ordering any equipment.
Energy renovation is a significant investment. To better understand your budget, it is advisable to compare several quotes and analyze the specifics of your installation.
Using tools like the RenoIndex estimator provides a realistic price range for your project in Muri. This step is essential to avoid financial surprises.
Do not forget to include related costs such as adapting the electrical installation, dismantling the old boiler, and any necessary modifications to the heat distribution system for maximum efficiency.
Installing a heat pump is a major step towards a more sustainable home. To maximize the performance of your new system, it is often wise to improve the thermal insulation of your building envelope before replacing the boiler.
A better-insulated house allows the heat pump to operate at lower temperatures, thus improving its seasonal efficiency.
The RenoIndex estimator supports you in these reflections by providing indications of the estimated costs for these works necessary for a successful energy transition.
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
No specific grant listed for this work. Maintenance tax deductions may still apply.
2829 Vermes · about 64.6 km
The website presented under the name Imeri Chauffage et Sanitaire Sàrl offers plumbing, heating and solar thermal work, while F. Imeri Sàrl’s registered purpose refers to a scrap metal business.
imeri-sarl.ch2824 Vicques · about 69.4 km
Specialist since 1968 in sanitary installations, heating (gas, oil, wood, renewable energy), and tinsmithing with 24/7 emergency repair service.
sanit.ch2824 Vicques · about 69.4 km
Buchwalder Sàrl in Vicques has specialized in the installation, repair, and renovation of heating and sanitary systems since 1966.
buchwalder-sarl.ch2824 Vicques · about 69.4 km
Gyger Haustechnik specializes in sanitary installations, heating systems, bathroom renovations, and tiling work.
gyger-co.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
Use the free RenoIndex estimator to quickly get an accurate price range. It considers your location in Muri and the technical specifics of your renovation to provide you with a reliable and transparent estimate.
Air-water heat pumps produce noise while the fan is running. In Muri, it is essential to place the outdoor unit respecting legal and technical distances from windows and neighbouring properties to avoid any noise nuisance.
Yes, better insulation reduces your heat demand. This allows you to choose a smaller and less expensive heat pump while reducing your annual electricity consumption, thus optimizing the overall efficiency of your installation in Muri.
There is currently no information on municipal grants in Muri. However, it is recommended to check available cantonal and federal programs for the energy transition, as they regularly provide grants for the replacement of fossil-fuel heating systems.
