Solar water heating · Malters
At a glance
Small project
CHF 8'900 – CHF 20'800
Typical project
CHF 11'500 – CHF 26'600
Large project
CHF 15'700 – CHF 36'200
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 3 m² | CHF 8'900 | CHF 20'800 | CHF 4'800 |
| Typical project | 6 m² | CHF 11'500 | CHF 26'600 | CHF 3'100 |
| Large project | 11 m² | CHF 15'700 | CHF 36'200 | CHF 2'300 |
Computed with our estimator for Malters (regional factor included), standard finish. Only the project size changes.
Included
Not included
In Malters, the federal building register lists 1'302 residential buildings and 3'571 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
49 % built before 1980
Construction year does not reveal past renovations: check the current insulation condition.
44 % · Heat pump
This distribution describes recorded buildings, not your system's consumption or efficiency.
| Energy | Heating | Hot water |
|---|---|---|
| Heating oil | 27 % | 21.4 % |
| District heating | 4 % | 4.1 % |
| Heat pump | 44 % | 23.1 % |
| Electricity | 3 % | 34.7 % |
| Wood | 21 % | 13.6 % |
| Solar thermal | 0 % | 2.4 % |
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
A standard non-condensing boiler is usually older and less efficient.
15.2 % of buildings mix housing with shops or offices.
For renovation planning in Malters, building registry data identifies 273 properties under heritage protection, requiring early contact with municipal authorities to determine specific permit needs. Regarding building volume, data covers 674 houses, although specific measurements under the SIA 416 standard are currently unavailable. As data coverage is partial and no figures are recorded for the year of renovation, homeowners should perform thorough on-site assessments to accurately evaluate requirements for heating and insulation upgrades. By consulting with local officials early in your project, you can better navigate heritage constraints and ensure your renovation aligns with official standards.
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
Solar thermal collectors capture energy from the sun to heat a heat-transfer fluid. This process usually covers a large portion of your hot water needs, especially during the summer.
It is essential to choose the right location for the panels, ideally facing south, to maximize yield. Unlike photovoltaics, which produce electricity, this solution focuses exclusively on heat production.
This technology is an excellent option for reducing your dependence on fossil fuels while increasing the value of your property in Malters. Ensure professional installation by qualified experts.
Integrating a solar thermal system requires a holistic approach to your existing heating setup. Combining collectors with a heat pump requires a rigorous sizing study.
This step ensures optimal compatibility between components and prevents summer overheating or winter shortages. It is advisable to hire a qualified professional to assess your real needs.
A well-sized system ensures increased longevity of your installation and maximum long-term profitability for your home in Lucerne. Carefully plan this component into your renovation concept.
These financial aids can significantly reduce your initial investment. Although conditions vary, investment in solar thermal remains supported at the cantonal level.
Use our RenoIndex estimator to get a clear view of projected costs and incorporate potential aid into your overall profitability calculation. This will help you define your budget accurately.
Budget planning is the most delicate step of any energy renovation project in Malters. The final cost will depend on the type of collectors, the complexity of the roof installation, and the adaptation of the existing storage system.
To obtain a reliable price range adapted to the Swiss market, the RenoIndex estimator is your best ally. Obtaining a free estimate allows you to compare quotes from your craftsmen against a solid baseline.
Take the time to analyse your needs to optimise your future operating costs. Thorough preparation is the key to success.
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
No specific grant listed for this work. Maintenance tax deductions may still apply.
2829 Vermes · about 61.4 km
The website presented under the name Imeri Chauffage et Sanitaire Sàrl offers plumbing, heating and solar thermal work, while F. Imeri Sàrl’s registered purpose refers to a scrap metal business.
imeri-sarl.ch2832 Rebeuvelier · about 65.9 km
Eco6therm specializes in the installation of heating systems, particularly heat pumps, and solar photovoltaic energy solutions.
eco6therm.ch2824 Vicques · about 67 km
Specialist since 1968 in sanitary installations, heating (gas, oil, wood, renewable energy), and tinsmithing with 24/7 emergency repair service.
sanit.ch2824 Vicques · about 67 km
Buchwalder Sàrl in Vicques has specialized in the installation, repair, and renovation of heating and sanitary systems since 1966.
buchwalder-sarl.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
A well-maintained solar thermal system typically has a lifespan of 20 to 25 years. Regular maintenance of the heat transfer fluid and mechanical components helps maximize performance throughout this period.
Generally, solar installations that are integrated or mounted on the roof do not require a building permit, but a simple notification is often sufficient. Always check the local regulations in force for your type of building.
Yes, solar collectors work even in winter if the sun is shining. However, the yield is lower due to shorter sunshine hours and cold temperatures, requiring a backup heating source.
You can use the free RenoIndex estimator to get a realistic price range for your solar installation in Malters. This will help you prepare your budget before contacting local professionals.
