Eco6therm Sàrl
2832 Rebeuvelier · about 65.9 km
Eco6therm specializes in the installation of heating systems, particularly heat pumps, and solar photovoltaic energy solutions.
eco6therm.chSolar panels · Malters

At a glance
Small project
CHF 8'700 – CHF 16'400
Typical project
CHF 16'000 – CHF 29'000
Large project
CHF 27'700 – CHF 49'200
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 5 kWc | CHF 8'700 | CHF 16'400 | CHF 2'400 |
| Typical project | 10 kWc | CHF 16'000 | CHF 29'000 | CHF 2'200 |
| Large project | 18 kWc | CHF 27'700 | CHF 49'200 | CHF 2'100 |
Computed with our estimator for Malters (regional factor included), standard finish. Only the project size changes.
Included
Not included
In Malters, the federal building register lists 1'302 residential buildings and 3'571 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
49 % built before 1980
Construction year does not reveal past renovations: check the current insulation condition.
44 % · Heat pump
This distribution describes recorded buildings, not your system's consumption or efficiency.
| Energy | Heating | Hot water |
|---|---|---|
| Heating oil | 27 % | 21.4 % |
| District heating | 4 % | 4.1 % |
| Heat pump | 44 % | 23.1 % |
| Electricity | 3 % | 34.7 % |
| Wood | 21 % | 13.6 % |
| Solar thermal | 0 % | 2.4 % |
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
A standard non-condensing boiler is usually older and less efficient.
15.2 % of buildings mix housing with shops or offices.
For renovation planning in Malters, building registry data identifies 273 properties under heritage protection, requiring early contact with municipal authorities to determine specific permit needs. Regarding building volume, data covers 674 houses, although specific measurements under the SIA 416 standard are currently unavailable. As data coverage is partial and no figures are recorded for the year of renovation, homeowners should perform thorough on-site assessments to accurately evaluate requirements for heating and insulation upgrades. By consulting with local officials early in your project, you can better navigate heritage constraints and ensure your renovation aligns with official standards.
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
Investing in photovoltaics allows you to significantly reduce your electricity bills in the long term., self-consumption. By producing your own power, you become less dependent on market price fluctuations.
In addition, solar installations increase the market value of your building. In Switzerland, energy policies encourage this transition towards renewable solutions.
Before you start, make sure to size your system according to your actual annual consumption to optimize the return on investment of your home solar installation.
This means that a full building permit procedure is generally not required if technical standards are met. However, it is always recommended to check with your municipality to verify specific conditions for your area.
Respecting distances and aesthetic integration rules is crucial to guarantee a compliant installation that will not require costly future modifications.
It is advisable to submit your application before starting work to ensure your eligibility. Also, check for any grants available in the canton of Lucerne. By combining these incentives with careful planning, you can shorten the payback period of your project.
Use our RenoIndex estimator to get a realistic simulation of costs and potential grants.
Planning starts with an analysis of the pitch and orientation of your roof. A south-facing exposure is ideal, although other orientations can also be efficient.
Hiring certified professionals is essential to ensure a safe and durable installation in compliance with Swiss electrical standards. They will also handle the declaration of conformity and grid connection.
During work, prioritize durable and high-performance materials to ensure optimal production over several decades. Regular maintenance, although minimal, helps extend the lifespan of your equipment and keep its energy yield at the highest level.
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
No specific grant listed for this work. Maintenance tax deductions may still apply.
2832 Rebeuvelier · about 65.9 km
Eco6therm specializes in the installation of heating systems, particularly heat pumps, and solar photovoltaic energy solutions.
eco6therm.ch3984 Fiesch · about 66.3 km
TZ Stromag is a full-service provider of electrical engineering, specializing in installations, telematics, automation, and switchgear construction.
stromag.ch2740 Moutier · about 67.8 km
Moutier-based company specializing in tinsmithing, roofing, ventilated facades, and solar panel installation.
zbinden-joye.ch2740 Moutier · about 67.8 km
Company in Moutier specializing in plumbing, heating (oil, wood, heat pumps), and solar thermal and photovoltaic solutions.
bmonnerat.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
Yes, thanks to reduced electricity purchase costs and federal grants, profitability is generally ensured over the long term. It depends primarily on your local self-consumption rate.
For most roofs, a simple notification is sufficient because well-integrated systems are often subject to a simplified procedure throughout Switzerland.
You must submit an application to Pronovo for the one-off remuneration. It is recommended to do so before starting your installation work.
Use the free online RenoIndex estimator to get a price range adapted to your project in Swiss francs in just a few clicks.