Hallenbarter & Russi Gebäudetechnik AG
3988 Obergoms · about 60.3 km
Obergoms-based company specializing in sanitary installations, heating systems, roofing, and tinsmith work for new builds and renovations.
hallenbarter-russi.chBathroom renovation · Malters

At a glance
Small project
CHF 11'200 – CHF 31'000
Typical project
CHF 15'100 – CHF 40'700
Large project
CHF 21'800 – CHF 56'800
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 3 m² | CHF 11'200 | CHF 31'000 | CHF 6'400 |
| Typical project | 6 m² | CHF 15'100 | CHF 40'700 | CHF 4'200 |
| Large project | 11 m² | CHF 21'800 | CHF 56'800 | CHF 3'200 |
Computed with our estimator for Malters (regional factor included), standard finish. Only the project size changes.
Included
Not included
In Malters, the federal building register lists 1'302 residential buildings and 3'571 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
49 % built before 1980
Construction year does not reveal past renovations: check the current insulation condition.
44 % · Heat pump
This distribution describes recorded buildings, not your system's consumption or efficiency.
For renovation planning in Malters, building registry data identifies 273 properties under heritage protection, requiring early contact with municipal authorities to determine specific permit needs. Regarding building volume, data covers 674 houses, although specific measurements under the SIA 416 standard are currently unavailable. As data coverage is partial and no figures are recorded for the year of renovation, homeowners should perform thorough on-site assessments to accurately evaluate requirements for heating and insulation upgrades. By consulting with local officials early in your project, you can better navigate heritage constraints and ensure your renovation aligns with official standards.
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
When replacing a bathtub with a walk-in shower, it is crucial to check the available drain slope in the floor. A mistake here can lead to major drainage issues. Ensure your installation complies with standards in the canton of Lucerne.
It is also recommended to check the condition of existing pipes to avoid unpleasant surprises. If you are uncertain about the feasibility, consult an expert.
For a clear idea of your budget, don't forget to use the RenoIndex simulator to get a realistic price range for your project in Malters.
Hard water can quickly cause limescale on your fittings and shower screens, increasing the time needed for cleaning. In Malters, it is wise to choose easy-to-clean surfaces, such as treated coatings or smooth materials that limit limescale buildup.
Opting for high-quality fittings also allows for better long-term resistance. Investing in durable materials during your renovation is a wise decision.
RenoIndex supports you in this reflection by offering a reliable estimate of the total costs, including materials, for your bathroom.
Renovating a bathroom requires strict organization, as you will not be able to use the room for the duration of the work. As a general rule, expect between 2 and 4 weeks for a full transformation.
This period includes demolition, plumbing installation, and finishing. Anticipate this period by arranging an alternative solution. To avoid delays, coordinate your local contractors well.
Use the RenoIndex simulator to estimate costs, which will help you better manage your overall budget for these works in Malters.
Establishing a precise budget is the most important step before starting your work in Malters. Costs can vary significantly depending on the choice of materials, the complexity of sanitary installations, and the scope of plumbing work.
As a free estimation tool, RenoIndex provides you with a price range adapted to the Swiss market. Leave nothing to chance and take advantage of this resource to anticipate every expense.
Once you have your range, you can confidently contact specialized companies in the canton of Lucerne to get firm quotes and start your project.
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
No specific grant listed for this work. Maintenance tax deductions may still apply.
3988 Obergoms · about 60.3 km
Obergoms-based company specializing in sanitary installations, heating systems, roofing, and tinsmith work for new builds and renovations.
hallenbarter-russi.ch2829 Vermes · about 61.4 km
The website presented under the name Imeri Chauffage et Sanitaire Sàrl offers plumbing, heating and solar thermal work, while F. Imeri Sàrl’s registered purpose refers to a scrap metal business.
imeri-sarl.ch2743 Eschert · about 64 km
Bâtilook Sàrl provides comprehensive renovation services, from structural work to finishing, in the Jura and Bernese Jura regions.
batilook.ch2824 Vicques · about 67 km
Specialist since 1968 in sanitary installations, heating (gas, oil, wood, renewable energy), and tinsmithing with 24/7 emergency repair service.
sanit.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
On average, you should allow between 2 and 4 weeks. The duration depends on the scope of the work, especially if you are changing the layout or plumbing. A clear schedule with your contractors is essential to meet these deadlines.
Favor smooth materials and treated fittings. Regular cleaning with suitable products and the installation of a water softener, if necessary, can limit deposits. Think about these choices during the design phase to make your daily life easier.
Use the free RenoIndex simulator. It allows you to obtain a price range adapted to the Swiss market, helping you to correctly budget your renovation before requesting detailed quotes from local companies.
It is imperative to check the available drain slope in your floor. Without sufficient slope, water will not drain properly. Consult a professional to validate technical feasibility before ordering your materials.