Eco6therm Sàrl
2832 Rebeuvelier · about 26.3 km
Eco6therm specializes in the installation of heating systems, particularly heat pumps, and solar photovoltaic energy solutions.
eco6therm.chHome solar battery · Herzogenbuchsee

At a glance
Small project
CHF 4'000 – CHF 9'300
Typical project
CHF 7'400 – CHF 15'700
Large project
CHF 12'700 – CHF 25'900
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 5 kWh | CHF 4'000 | CHF 9'300 | CHF 1'200 |
| Typical project | 10 kWh | CHF 7'400 | CHF 15'700 | CHF 1'100 |
| Large project | 18 kWh | CHF 12'700 | CHF 25'900 | CHF 1'000 |
Computed with our estimator for Herzogenbuchsee (regional factor included), standard finish. Only the project size changes.
Included
Not included
In Herzogenbuchsee, the federal building register lists 1'581 residential buildings and 3'725 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
66 % built before 1980
Construction year does not reveal past renovations: check the current insulation condition.
33 % · Gas
This distribution describes recorded buildings, not your system's consumption or efficiency.
| Energy | Heating | Hot water |
|---|---|---|
| Gas | 33 % | 29.1 % |
| Heating oil | 30 % | 25.7 % |
| District heating | 1 % | 0.5 % |
| Heat pump | 27 % | 15.5 % |
| Electricity | 4 % | 26.1 % |
| Wood | 5 % | 2.2 % |
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
A standard non-condensing boiler is usually older and less efficient.
11.3 % of buildings mix housing with shops or offices.
When planning renovations in Herzogenbuchsee, official building register data reveals that 4 out of 1581 buildings are under heritage protection. If your property is classified, you must contact the municipality early to secure necessary permits. Based on the 2 houses measured under the SIA 416 standard, the median volume is 1084.5 m3, which helps gauge the scope of thermal insulation and heating upgrades. Please be aware that data coverage is highly incomplete, as most building volumes remain unmeasured, and information regarding specific renovation years is not currently recorded in the official database.
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
A battery is worthwhile when solar output clearly exceeds your daytime use. By storing the energy produced during sunny hours, you can use it in the evening or early morning, when your needs are highest but production is zero.
This increases your self-consumption rate, which is particularly advantageous in the current energy context.
Before starting such a project in Herzogenbuchsee, it is recommended to evaluate your consumption habits to estimate potential savings on your electricity bill.
Size capacity by evening consumption, not panel power. It is unnecessary to install an oversized battery if you do not consume enough electricity after sunset.
Over-dimensioning increases the initial investment unnecessarily without improving overall profitability. Analyze your energy profile to select a capacity that matches your household needs precisely.
To obtain a cost estimate based on standard market capacities, do not hesitate to consult the free RenoIndex simulator.
Check compatibility with your existing inverter before buying. Some modern systems work with hybrid inverters capable of managing the battery directly.
If you already have a solar installation, it may be necessary to add a specific battery inverter for AC coupling. A local professional will be able to confirm if your current setup can integrate a battery or if a full upgrade is preferred.
Use RenoIndex to compare cost options before requesting quotes from qualified companies.
Integrating a battery in Herzogenbuchsee is a long-term project for your home. Although initial costs are significant, the reduction of your electricity bill over several years ensures attractive profitability.
Consider planning your work consistently with other possible energy renovations to optimize labor costs.
For full transparency on prices, visit the RenoIndex website, which will provide an indicative price range for your solar energy storage project in Switzerland.
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
No specific grant listed for this work. Maintenance tax deductions may still apply.
2832 Rebeuvelier · about 26.3 km
Eco6therm specializes in the installation of heating systems, particularly heat pumps, and solar photovoltaic energy solutions.
eco6therm.ch2735 Malleray · about 32.9 km
Company specialized in electrical installations and telecommunications systems, including network infrastructure and related trade.
telecrengglisa.ch2605 Sonceboz-Sombeval · about 40.3 km
Solar conseil Sàrl specializes in the installation of photovoltaic power plants, energy storage solutions, and energy efficiency consulting in the Jura and Bernese Jura regions.
solarconseil.ch2718 Lajoux JU · about 44.1 km
Jura-based specialist in photovoltaic panel installation and energy storage solutions with AI-driven optimization.
hypersolaire.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
Most modern lithium batteries installed in Switzerland have a lifespan of 10 to 15 years. Their performance gradually decreases over the number of charge and discharge cycles.
In general, adding an indoor battery does not require a building permit. However, always check with municipal authorities to confirm local rules specific to your building type.
Batteries should be installed in a dry, temperate, and well-ventilated area, such as a basement or laundry room. Avoid areas subject to strong temperature fluctuations.
For electrical safety and compliance with Swiss standards, the installation must be carried out by a qualified professional. This also ensures the validity of your manufacturer's warranty.