Canton
Solar thermal — Valais
Per current schedule.
Valais support for solar thermal systems.
www.leprogrammebatiments.chSolar water heating · Fully
Solar water heating in Fully
Indicative price, tips, grants and companies for your project in Fully (Valais).
At a glance
- Typical budget
- CHF 13'000 – CHF 30'200
- Midpoint
- CHF 20'900
- Grants found
- 1
- Nearby companies
- 4
Worked examples in Fully
Small project
CHF 10'100 – CHF 23'600
Typical project
CHF 13'000 – CHF 30'200
Large project
CHF 17'800 – CHF 41'000
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 3 m² | CHF 10'100 | CHF 23'600 | CHF 5'500 |
| Typical project | 6 m² | CHF 13'000 | CHF 30'200 | CHF 3'500 |
| Large project | 11 m² | CHF 17'800 | CHF 41'000 | CHF 2'600 |
Computed with our estimator for Fully (regional factor included), standard finish. Only the project size changes.
Cost split (typical project)
- Labour : CHF 8'400 (40 %)
- Materials : CHF 10'500 (50 %)
- Other costs : CHF 2'100 (10 %)
What the price covers
Included
- Supply and installation
- VAT
- Collectors, controls, standard connection and tank according to answers
Not included
- Permits and architect fees
- Unexpected structural issues
- Possible subsidies
- Roof refurbishment and replacement of main heating
Fully's housing stock in figures
In Fully, the federal building register lists 2'542 residential buildings and 4'720 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
Age of residential buildings
42 % built before 1980
- Before 191911 %
- 1919–19458 %
- 1946–19609 %
- 1961–19707 %
- 1971–19807 %
- 1981–199012 %
- 1991–200011 %
- 2001–201017 %
- Since 201118 %
Construction year does not reveal past renovations: check the current insulation condition.
Main heating energy
46 % · Heat pump
- Heat pump46 %
- Electricity22 %
- Heating oil21 %
- Wood10 %
This distribution describes recorded buildings, not your system's consumption or efficiency.
Heating and hot water: which energies?
| Energy | Heating | Hot water |
|---|---|---|
| Heating oil | 21 % | 22.7 % |
| Heat pump | 46 % | 13.3 % |
| Electricity | 22 % | 58.8 % |
| Wood | 10 % | 1.4 % |
| Solar thermal | 0 % | 2.7 % |
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
Type of heating system
- Heat pump46.8 %
- Boiler (unspecified)24.9 %
- Central electric heating19.8 %
- Stove6.2 %
- Direct electric heaters1.5 %
A standard non-condensing boiler is usually older and less efficient.
Houses or apartment buildings?
- Single-family houses72.4 %
- Two-dwelling houses13.3 %
- Apartment buildings (3+)14.3 %
6.5 % of buildings mix housing with shops or offices.
The typical building
- storeys (median)
- 2
- median footprint
- 113 m²
- median dwelling area
- 100 m²
Renovations, heritage and volumes
For renovation projects in Fully, the median building volume of 767 m3 serves as a vital benchmark for scaling heating or insulation upgrades according to the SIA 416 standard, though data coverage is limited across the 2542 total buildings. Regarding heritage protection, no specific protected status is recorded for the 164 buildings with known data. Because coverage is partial, we strongly recommend contacting the municipality early in your planning process. Engaging with local authorities ensures you identify any potential architectural constraints or historical requirements that may affect your permits or the scope of your renovation work.
0
buildings flagged as protected
status known for 164 of 2'542 buildings; check with the municipality
767 m³
median house volume (SIA 416)
measured for 100 of 1'840 houses
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
Tips before you start
- Solar thermal collectors usually cover much of summer hot water.
- Combining collectors with a heat pump needs a sizing study.
- Several cantons subsidise collectors per m² or per installation.
Your project in 5 steps
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
Grants and subsidies
Check amounts and conditions with the provider before signing: apply before work starts in most cases.
Companies in the area
Pellouchoud & Cie Electricité-Chauffage
1926 Fully · about 0 km
Valais-based specialist since 1970 in electrical installations, Stiebel Eltron heat pumps, photovoltaic, and solar thermal systems.
pellouchoud.chThermex SA, succursale de Martigny
1920 Martigny · about 6.1 km
Thermex SA is a company specializing in heating, ventilation, air conditioning, and renewable energy solutions for the sanitary sector.
thermex.chBESTAZZONI SA
1920 Martigny · about 6.1 km
Bestazzoni SA is a company based in Martigny specializing in sanitary installations, heating, ventilation, and heat pumps.
bestazzoni.chDDS Désembouage Détartrage Sanitaire Sàrl
1920 Martigny · about 6.1 km
DDS Sàrl, based in Martigny, specializes in water treatment, sludge removal for heating circuits, and descaling of sanitary installations.
dds-detartrage.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
Works often combined in Fully
Other works in Fully
Kitchen renovationBathroom renovationNew flooringInterior paintingWindow replacementRoof renovationFacade insulationHeat pump installationSolar panelsHome solar batteryTerrace constructionFence installationStairwell renovationElevator installation or upgrade