Solar water heating · Amriswil
At a glance
Small project
CHF 10'300 – CHF 24'100
Typical project
CHF 13'200 – CHF 30'700
Large project
CHF 18'200 – CHF 41'800
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 3 m² | CHF 10'300 | CHF 24'100 | CHF 5'600 |
| Typical project | 6 m² | CHF 13'200 | CHF 30'700 | CHF 3'500 |
| Large project | 11 m² | CHF 18'200 | CHF 41'800 | CHF 2'600 |
Computed with our estimator for Amriswil (regional factor included), standard finish. Only the project size changes.
Included
Not included
In Amriswil, the federal building register lists 2'516 residential buildings and 7'031 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
56 % built before 1980
Construction year does not reveal past renovations: check the current insulation condition.
31 % · Heating oil
This distribution describes recorded buildings, not your system's consumption or efficiency.
| Energy | Heating | Hot water |
|---|---|---|
| Gas | 27 % | 25.6 % |
| Heating oil | 31 % | 27.6 % |
| District heating | 2 % | 1.2 % |
| Heat pump | 31 % | 16 % |
| Electricity | 2 % | 18.6 % |
| Wood | 7 % | 4.4 % |
| Solar thermal | 0 % | 6.3 % |
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
A standard non-condensing boiler is usually older and less efficient.
13.2 % of buildings mix housing with shops or offices.
When planning your renovation in Amriswil, the official RegBL data provides essential insights for your property. With 7 buildings under heritage protection, it is vital to contact the municipality early to discuss permit requirements. The median building volume of 1078 m3, calculated according to the SIA 416 standard, helps determine the scale of potential heating or insulation improvements. Please note that data coverage is partial, as only 38 out of 1600 houses have been measured and no renovation years are recorded, making direct consultation with local authorities necessary for accurate project assessments.
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
Solar thermal collectors are designed to capture sun energy and transfer it to a heat transfer fluid. This system performs particularly well during the warmer months.
Generally, solar thermal collectors cover much of summer hot water, thus reducing the demand on your main boiler. However, it is necessary to check your roof's orientation in Amriswil to maximise efficiency.
A south-facing position is ideal to optimise energy capture throughout the year.
The installation does not work in isolation. If you are considering adding solar panels to complement a heat pump, a rigorous sizing study is essential. This step helps harmonise solar production with your existing heating system's capacity.
Poor planning could lead to energy inefficiency. Hire local professionals to assess the technical feasibility of this combination. RenoIndex supports your thinking by providing a clear budget base for your future installation in Amriswil.
It is advisable to check the programs currently in force in the canton of Thurgau before starting work. An application submitted in advance is often a prerequisite for receiving public funds.
Use RenoIndex to estimate your costs and plan your budget, including these grants.
A successful project in Amriswil requires rigour. Start by performing an energy audit of your home. Then, contact certified installers to obtain comparative quotes.
Do not forget to check local constraints or necessary permits with the competent authorities if your building is listed. Once you receive the quotes, compare them with average market prices using RenoIndex to ensure the relevance of your investment.
Finally, schedule the installation during off-peak periods to benefit from faster response times and better artisan availability.
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
No specific grant listed for this work. Maintenance tax deductions may still apply.
2829 Vermes · about 138.3 km
The website presented under the name Imeri Chauffage et Sanitaire Sàrl offers plumbing, heating and solar thermal work, while F. Imeri Sàrl’s registered purpose refers to a scrap metal business.
imeri-sarl.ch2824 Vicques · about 142 km
Buchwalder Sàrl in Vicques has specialized in the installation, repair, and renovation of heating and sanitary systems since 1966.
buchwalder-sarl.ch2824 Vicques · about 142 km
Specialist since 1968 in sanitary installations, heating (gas, oil, wood, renewable energy), and tinsmithing with 24/7 emergency repair service.
sanit.ch2824 Vicques · about 142 km
Gyger Haustechnik specializes in sanitary installations, heating systems, bathroom renovations, and tiling work.
gyger-co.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
It is highly recommended to hire a qualified professional. A complex installation requires plumbing and electrical knowledge. Furthermore, to claim grants in the canton of Thurgau, an invoice from a certified artisan is often required to validate the work in accordance with current standards.
On average, installing solar thermal panels on a residential roof in Amriswil takes 2 to 5 working days. The duration varies depending on your roof configuration, the type of collectors chosen, and the connection required to your existing hot water tank. Early preparation speeds up the process.
Yes, collectors work even in cold weather thanks to solar radiation, although output is lower than in summer. In winter, they are mainly used to preheat water. For maximum efficiency, a supplementary system is essential to ensure total thermal comfort during the coldest days.
To get a precise price range in CHF for your project in Amriswil, use the free online simulator provided by RenoIndex. This tool allows you to visualise average costs based on your home's specifics and better anticipate the budget required for your energy renovation works.
