Eco6therm Sàrl
2832 Rebeuvelier · about 143.2 km
Eco6therm specializes in the installation of heating systems, particularly heat pumps, and solar photovoltaic energy solutions.
eco6therm.chSolar panels · Amriswil
Installing solar panels in Amriswil
Are you considering installing solar panels in Amriswil to generate your own green energy? This is a great choice to increase the value of your property in the canton of Thurgau. Whether you want to reduce electricity bills or contribute to the energy transition, careful planning is essential. From local regulations to federal support, our guide helps you through the process. To get an accurate estimate of your project costs, use the free RenoIndex estimator and receive a tailored price range today.
At a glance
- Typical budget
- CHF 18'500 – CHF 33'500
- Midpoint
- CHF 25'300
- Grants found
- 0
- Nearby companies
- 4
Worked examples in Amriswil
Small project
CHF 10'000 – CHF 18'900
Typical project
CHF 18'500 – CHF 33'500
Large project
CHF 32'000 – CHF 56'800
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 5 kWc | CHF 10'000 | CHF 18'900 | CHF 2'800 |
| Typical project | 10 kWc | CHF 18'500 | CHF 33'500 | CHF 2'500 |
| Large project | 18 kWc | CHF 32'000 | CHF 56'800 | CHF 2'400 |
Computed with our estimator for Amriswil (regional factor included), standard finish. Only the project size changes.
Cost split (typical project)
- Labour : CHF 8'800 (35 %)
- Materials : CHF 13'900 (55 %)
- Other costs : CHF 2'500 (10 %)
What the price covers
Included
- Supply and installation
- VAT
- Inverter and grid connection
Not included
- Permits and architect fees
- Unexpected structural issues
- Possible subsidies
- Battery, roof refurbishment and structural reinforcement
Amriswil's housing stock in figures
In Amriswil, the federal building register lists 2'516 residential buildings and 7'031 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
Age of residential buildings
56 % built before 1980
- Before 191922 %
- 1919–194512 %
- 1946–19608 %
- 1961–19706 %
- 1971–19808 %
- 1981–199010 %
- 1991–200011 %
- 2001–20109 %
- Since 201113 %
Construction year does not reveal past renovations: check the current insulation condition.
Main heating energy
31 % · Heating oil
- Heating oil31 %
- Heat pump31 %
- Gas27 %
- Wood7 %
- District heating2 %
- Electricity2 %
This distribution describes recorded buildings, not your system's consumption or efficiency.
Heating and hot water: which energies?
| Energy | Heating | Hot water |
|---|---|---|
| Gas | 27 % | 25.6 % |
| Heating oil | 31 % | 27.6 % |
| District heating | 2 % | 1.2 % |
| Heat pump | 31 % | 16 % |
| Electricity | 2 % | 18.6 % |
| Wood | 7 % | 4.4 % |
| Solar thermal | 0 % | 6.3 % |
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
Type of heating system
- Boiler (unspecified)63 %
- Heat pump30.9 %
- Heat exchanger (district)2.3 %
- Central electric heating1.4 %
- Stove1.2 %
- Condensing boiler0.9 %
A standard non-condensing boiler is usually older and less efficient.
Houses or apartment buildings?
- Single-family houses63.6 %
- Two-dwelling houses9.7 %
- Apartment buildings (3+)26.7 %
13.2 % of buildings mix housing with shops or offices.
The typical building
- storeys (median)
- 2
- median footprint
- 132 m²
- median dwelling area
- 100 m²
Renovations, heritage and volumes
When planning your renovation in Amriswil, the official RegBL data provides essential insights for your property. With 7 buildings under heritage protection, it is vital to contact the municipality early to discuss permit requirements. The median building volume of 1078 m3, calculated according to the SIA 416 standard, helps determine the scale of potential heating or insulation improvements. Please note that data coverage is partial, as only 38 out of 1600 houses have been measured and no renovation years are recorded, making direct consultation with local authorities necessary for accurate project assessments.
7
buildings flagged as protected
status known for 578 of 2'516 buildings; check with the municipality
1'078 m³
median house volume (SIA 416)
measured for 38 of 1'600 houses
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
Benefits of solar panels
Installing solar panels in Amriswil allows you to become a key player in the Swiss energy transition. Beyond the ecological aspect, producing your own electricity increases your home's independence.
The profitability of your investment mainly depends on your self-consumption rate, which is the amount of electricity you use directly while it is being produced.
By optimizing your usage, you maximize long-term savings while benefiting from a durable installation that significantly adds value to your real estate property in the Thurgau market.
Financial support and grants
Although no specific municipal grants are listed for Amriswil, it is always recommended to check the latest conditions with local authorities or cantonal services in Thurgau.
Use RenoIndex to get a full cost simulation, incorporating these factors to better anticipate your total budget before starting your project.
Regulations and permits
In the canton of Thurgau, a suitably integrated roof system often only requires a simple notification procedure rather than a full building permit, provided that safety and visual integration standards are met.
However, it is necessary to check the local zoning plan if your building is listed. For total peace of mind, always seek advice from a certified installer who can confirm your project's compliance before installation.
Successfully completing your project in Amriswil
The success of your solar installation depends on careful planning. Start by evaluating the orientation and pitch of your roof to maximize energy yield. Then, hire qualified professionals to get detailed quotes and compare technical solutions.
Don't forget to include long-term maintenance and the evolution of electricity feed-in tariffs in your calculations.
To obtain a reliable and personalized price estimate in Amriswil, do not hesitate to use the RenoIndex calculator, which provides a cost range adapted to your specific needs.
Your project in 5 steps
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
Grants and subsidies
No specific grant listed for this work. Maintenance tax deductions may still apply.
Companies in the area
Zbinden & Joye SA successeur Pierre Streit
2740 Moutier · about 148.5 km
Moutier-based company specializing in tinsmithing, roofing, ventilated facades, and solar panel installation.
zbinden-joye.chBernard Monnerat
2740 Moutier · about 148.5 km
Company in Moutier specializing in plumbing, heating (oil, wood, heat pumps), and solar thermal and photovoltaic solutions.
bmonnerat.chADS Construction Sàrl
2800 Delémont · about 148.5 km
Construction and renovation company in Delémont, specializing in masonry, sanitary facilities, heating, and turnkey projects in the Jura region.
adsconstruction.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
Frequently asked questions
Do I need a building permit in Amriswil?
In the canton of Thurgau, a roof-mounted system that complies with aesthetic integration rules is generally subject only to a simple prior notification. However, if your building is protected or located in a specific zone, additional permits may be required. It is advised to check with your local municipality.
How do I get the Pronovo grant?
The one-off remuneration is managed by Pronovo. You must submit your application directly online via their platform. Your installer can often help you with this process. It is best to submit the application shortly after planning to ensure your file is processed in accordance with federal rules.
How long does installation take?
The physical installation of the panels on your roof usually takes between two and five days, depending on the complexity of the roof and the system's power. The preparatory phase, including administrative steps and material ordering, can take several weeks before work begins on site.
Where can I find current prices for my project?
To get a realistic price range for your project in Amriswil, use our free RenoIndex tool. It allows you to estimate costs based on Swiss standards, giving you a reliable basis for budgeting your work before requesting detailed quotes from local companies.
Works often combined in Amriswil
Home solar battery cost in AmriswilHeat pump installation cost in AmriswilRoof renovation cost in Amriswil
Other works in Amriswil
Kitchen renovationBathroom renovationNew flooringInterior paintingWindow replacementRoof renovationFacade insulationHeat pump installationHome solar batterySolar water heatingTerrace constructionFence installationStairwell renovationElevator installation or upgrade