Solar water heating · Aadorf
At a glance
Small project
CHF 10'300 – CHF 24'100
Typical project
CHF 13'200 – CHF 30'700
Large project
CHF 18'200 – CHF 41'800
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 3 m² | CHF 10'300 | CHF 24'100 | CHF 5'600 |
| Typical project | 6 m² | CHF 13'200 | CHF 30'700 | CHF 3'500 |
| Large project | 11 m² | CHF 18'200 | CHF 41'800 | CHF 2'600 |
Computed with our estimator for Aadorf (regional factor included), standard finish. Only the project size changes.
Included
Not included
In Aadorf, the federal building register lists 2'146 residential buildings and 4'497 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
48 % built before 1980
Construction year does not reveal past renovations: check the current insulation condition.
34 % · Heat pump
This distribution describes recorded buildings, not your system's consumption or efficiency.
| Energy | Heating | Hot water |
|---|---|---|
| Gas | 26 % | 24.7 % |
| Heating oil | 24 % | 22.1 % |
| District heating | 5 % | 3.9 % |
| Heat pump | 34 % | 12.7 % |
| Electricity | 3 % | 24.3 % |
| Wood | 9 % | 5.3 % |
| Solar thermal | 0 % | 6.5 % |
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
A standard non-condensing boiler is usually older and less efficient.
9.2 % of buildings mix housing with shops or offices.
For homeowners in Aadorf, official building registry data offers vital insights for planning your renovation. Since information regarding renovation years and heritage protection is only partially covered, we recommend consulting the municipal authorities early in your project. For the 1605 houses registered, the median building volume is 1268 m3 according to the SIA 416 standard, though this figure relies on 3 recorded measurements. Understanding these metrics is essential for scaling your heating and insulation upgrades effectively. Utilize these building-specific figures to prepare accurately for the regulatory and technical requirements of your upcoming renovation work.
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
Solar thermal collectors usually cover much of summer hot water. To maximize this efficiency in Aadorf, it is crucial to orient your panels ideally towards the south with the correct tilt. A well-sized system significantly reduces your annual energy bill.
Also, ensure that the storage system, such as a well-insulated hot water tank, is properly installed to retain the heat produced during the day.
A preliminary analysis of your current consumption allows you to adjust the collector surface area to the actual needs of your household, thus guaranteeing a cost-effective investment over the long term.
Combining collectors with a heat pump needs a sizing study. This hybrid approach optimizes energy use by prioritizing solar thermal for water heating, thus limiting reliance on the heat pump's electricity during sunny months.
This strategy is particularly well-suited for complete renovations in Aadorf, where the integration of new technologies can transform the overall energy efficiency of the building.
Always seek advice from qualified professionals to avoid oversizing, which could reduce the overall profitability of your technical installation.
Funding for your installation can be optimized by bundling your energy renovation work to meet the current grant criteria in the canton of Thurgau.
Before starting work, always verify the grant conditions, as applications often need to be submitted before the project actually begins.
The success of a solar thermal installation in Aadorf relies on careful planning. Start with a technical assessment of your roof and your current thermal insulation. A poorly insulated roof can indeed reduce the benefit of solar production.
Work with certified companies to ensure compliance with installations and adherence to safety standards. Do not forget to use the RenoIndex estimator to obtain a reliable cost estimate.
By planning well, you ensure the maximum lifespan of your system and a significant reduction in your daily energy expenses.
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
No specific grant listed for this work. Maintenance tax deductions may still apply.
2829 Vermes · about 108.8 km
The website presented under the name Imeri Chauffage et Sanitaire Sàrl offers plumbing, heating and solar thermal work, while F. Imeri Sàrl’s registered purpose refers to a scrap metal business.
imeri-sarl.ch2824 Vicques · about 112.5 km
Buchwalder Sàrl in Vicques has specialized in the installation, repair, and renovation of heating and sanitary systems since 1966.
buchwalder-sarl.ch2824 Vicques · about 112.5 km
Specialist since 1968 in sanitary installations, heating (gas, oil, wood, renewable energy), and tinsmithing with 24/7 emergency repair service.
sanit.ch2824 Vicques · about 112.5 km
Gyger Haustechnik specializes in sanitary installations, heating systems, bathroom renovations, and tiling work.
gyger-co.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
A well-maintained solar thermal installation can operate efficiently for 20 to 25 years. Regular maintenance by a professional is essential to guarantee the long-term performance of the system.
Yes, solar collectors work even in winter in clear weather. However, their yield is lower due to shorter sunshine hours. They then serve mainly as a supplement to the main heating system.
It is recommended to contact your municipality's planning department to check if local restrictions apply, especially if your house is located in a protected area or a historical perimeter.
Profitability depends on your hot water consumption and avoided energy costs. Even without subsidies, savings on energy bills often allow the investment to be amortized over the years.
