Enosis Sàrl
3213 Liebistorf · about 22.1 km
Enosis develops biomethanation technologies to convert CO2 and surplus electricity into storable and sustainable green gas.
enosis-energies.comHeat pump installation · Zollikofen

At a glance
Small project
CHF 30'600 – CHF 55'900
Typical project
CHF 38'600 – CHF 71'900
Large project
CHF 50'600 – CHF 95'800
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 80 m² | CHF 30'600 | CHF 55'900 | CHF 500 |
| Typical project | 160 m² | CHF 38'600 | CHF 71'900 | CHF 300 |
| Large project | 280 m² | CHF 50'600 | CHF 95'800 | CHF 300 |
Computed with our estimator for Zollikofen (regional factor included), standard finish. Only the project size changes.
Included
Not included
In Zollikofen, the federal building register lists 1'609 residential buildings and 5'859 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
62 % built before 1980
Construction year does not reveal past renovations: check the current insulation condition.
39 % · Heating oil
This distribution describes recorded buildings, not your system's consumption or efficiency.
| Energy | Heating | Hot water |
|---|---|---|
| Gas | 22 % | 20.7 % |
| Heating oil | 39 % | 35.7 % |
| District heating | 11 % | 11.9 % |
| Heat pump | 23 % | 10.7 % |
| Electricity | 3 % | 16.9 % |
| Wood | 2 % | 1.6 % |
| Solar thermal | 0 % | 1.5 % |
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
A standard non-condensing boiler is usually older and less efficient.
For renovation projects in Zollikofen, official registry data provides vital context for planning. With only two buildings classified as heritage protected out of 1609, owners should contact the municipality early to confirm status and permit requirements. Regarding building scale, coverage is partial; only one house is measured at 858 m3 under the SIA 416 standard, while 882 others remain unmeasured or lack standard data. These figures are essential for homeowners to estimate the scope of heating or insulation works, provided they account for the limited statistical coverage currently available for building volumes within this specific municipality.
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
Before starting your search for a heat pump, you must check whether your neighbourhood in Zollikofen can be connected to a priority district heating network.
In some areas, authorities prioritise connection to a collective thermal grid over the installation of individual solutions. This preliminary check allows you to avoid unnecessary investments and comply with local energy guidelines.
If your area does not offer district heating, the heat pump becomes a top-tier alternative for replacing your old boiler.
The correct sizing of your device is crucial for long-term optimal efficiency. In Zollikofen, the local design outdoor temperature plays a key role in defining the necessary capacity of your heat pump.
An undersized unit will not be enough to heat your home during the coldest days, while an oversized model will lead to inefficient operation cycles.
It is advisable to have a professional heat calculation carried out to determine exactly the power required, ensuring high energy performance and a significant reduction in your energy bills.
If you opt for an outdoor air-water heat pump, complying with noise standards is essential to ensure a good relationship with your neighbours. In Switzerland, these systems must strictly meet the applicable noise limits.
It is important to choose a strategic location, away from neighbouring bedrooms or relaxation areas. Many modern models are equipped with advanced noise reduction technologies.
Before installation, discuss potential mitigation measures with your installer, such as noise barriers or specific fan orientation, to prevent any unnecessary noise disturbance.
The cost of a heat pump project varies depending on the chosen technology, the size of your building, and the scale of necessary adaptation work, such as modifying your existing heat distribution system.
To get a clear idea of the investments to be expected, do not hesitate to use the free RenoIndex simulator.
This tool will provide you with a price range in CHF tailored to your situation, allowing you to plan your budget better and compare quotes from local installers with confidence before signing a contract.
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
No specific grant listed for this work. Maintenance tax deductions may still apply.
3213 Liebistorf · about 22.1 km
Enosis develops biomethanation technologies to convert CO2 and surplus electricity into storable and sustainable green gas.
enosis-energies.com2504 Biel/Bienne · about 22.3 km
Operating in Biel/Bienne since 1948, E. Vauclair SA provides plumbing, heating and solar installations, architectural sheet metalwork, roofing and flat roof renovation.
vauclair.ch2504 Biel/Bienne · about 22.3 km
FJUConsulting specializes in the design and installation of HVAC, plumbing, and refrigeration systems for buildings.
fjuconsulting.ch2502 Biel/Bienne · about 23.2 km
Biel-based company specializing in bathroom installation and renovation, water heater replacement, and heat pump installation.
yb-sanitaire.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
In general, the installation of a heat pump requires a permit in the canton of Bern. Always check with your municipality or your installer regarding local administrative procedures, as specific regulations may apply depending on the type of technology chosen.
The heat pump offers high energy efficiency, thus reducing your heating bills. It is an ecological solution that uses renewable energy sources, sustainably increasing the value of your property while ensuring stable and high-performance thermal comfort all year round.
A well-maintained heat pump generally has a lifespan of between 15 and 20 years. Regular maintenance by a professional is essential to ensure the longevity of the device and to maintain its optimal energy performance over the years.
For a quick and free cost estimate, use the online RenoIndex simulator. It takes into account various parameters to provide you with an indicative price range, thus facilitating your decision-making for your energy renovation work.