Enosis Sàrl
3213 Liebistorf · about 27.9 km
Enosis develops biomethanation technologies to convert CO2 and surplus electricity into storable and sustainable green gas.
enosis-energies.comHeat pump installation · Worb
Heat pump installation in Worb: Renovation Guide
Are you planning to install a heat pump in Worb to improve your home's energy efficiency? This is a great move to reduce heating costs and your carbon footprint. Transitioning to renewable energy requires careful planning, particularly regarding system selection and adherence to current standards. Our guide helps you navigate the key steps of your renovation project. Use our free RenoIndex estimator now to get a reliable estimate of the potential costs for your specific renovation project in Worb.
At a glance
- Typical budget
- CHF 38'600 – CHF 71'900
- Midpoint
- CHF 54'000
- Grants found
- 0
- Nearby companies
- 4
Worked examples in Worb
Small project
CHF 30'600 – CHF 55'900
Typical project
CHF 38'600 – CHF 71'900
Large project
CHF 50'600 – CHF 95'800
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 80 m² | CHF 30'600 | CHF 55'900 | CHF 500 |
| Typical project | 160 m² | CHF 38'600 | CHF 71'900 | CHF 300 |
| Large project | 280 m² | CHF 50'600 | CHF 95'800 | CHF 300 |
Computed with our estimator for Worb (regional factor included), standard finish. Only the project size changes.
Cost split (typical project)
- Labour : CHF 21'600 (40 %)
- Materials : CHF 27'000 (50 %)
- Other costs : CHF 5'400 (10 %)
What the price covers
Included
- Supply and installation
- VAT
- Heat pump and standard connections; removal and equipment only according to answers
Not included
- Permits and architect fees
- Unexpected structural issues
- Possible subsidies
- Drilling beyond 150 m, buried or contaminated tank, asbestos, insulation and new finishes
- With air-to-air: hot water and ducts only if selected; adaptations beyond the options excluded
Worb's housing stock in figures
In Worb, the federal building register lists 2'253 residential buildings and 5'725 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
Age of residential buildings
66 % built before 1980
- Before 191915 %
- 1919–194510 %
- 1946–19609 %
- 1961–197016 %
- 1971–198016 %
- 1981–199012 %
- 1991–20008 %
- 2001–201012 %
- Since 20113 %
Construction year does not reveal past renovations: check the current insulation condition.
Main heating energy
44 % · Heating oil
- Heating oil44 %
- Heat pump27 %
- District heating12 %
- Wood11 %
- Electricity5 %
- Gas1 %
This distribution describes recorded buildings, not your system's consumption or efficiency.
Heating and hot water: which energies?
| Energy | Heating | Hot water |
|---|---|---|
| Gas | 1 % | 0.4 % |
| Heating oil | 44 % | 27.3 % |
| District heating | 12 % | 8.5 % |
| Heat pump | 27 % | 10.6 % |
| Electricity | 5 % | 46.2 % |
| Wood | 11 % | 5 % |
| Solar thermal | 0 % | 2 % |
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
Type of heating system
- Boiler (unspecified)37.3 %
- Heat pump27.5 %
- Standard boiler16.6 %
- Heat exchanger (district)11.5 %
- Central electric heating4.1 %
- Stove1.5 %
- Condensing boiler0.8 %
- Direct electric heaters0.7 %
A standard non-condensing boiler is usually older and less efficient.
Renovations, heritage and volumes
For your renovation projects in Worb, official building register figures offer key insights. With a median volume of 788 m3 across 1343 houses, this data based on the SIA 416 standard assists in evaluating the scale of heating or insulation work. Please note that data coverage for measured volume is partial, covering only 9 buildings. Furthermore, information regarding heritage protection and the year of renovation is not provided in the current register for this municipality, meaning these specific figures are not available for your planning process when using these official records.
0
buildings flagged as protected
status known for 142 of 2'253 buildings; check with the municipality
788 m³
median house volume (SIA 416)
measured for 9 of 1'343 houses
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
Preliminary analysis and local network
Before starting work in Worb, first check whether your area can connect to a priority district heating network. A feasibility study helps determine if replacing your current boiler with a heat pump is the most relevant solution.
Ensure your current heat distribution system, such as floor heating or low-temperature radiators, is compatible with this new equipment.
For an accurate budget assessment, check our RenoIndex tool to simulate your renovation costs and plan your project with complete peace of mind.
Sizing and capacity
Proper sizing of your heat pump is crucial for its efficiency. The local design outdoor temperature sets the heat pump's capacity.
An overpowered system leads to inefficient operating cycles, while an undersized system will fail to heat your home properly on the coldest winter days. It is essential to have a thermal calculation performed by a professional to ensure optimal performance.
Get an indicative price range for your installation by using the free RenoIndex estimator today.
Noise management and neighbours
Installing a heat pump requires careful attention to its location. Outdoor air-water heat pumps must meet noise limits towards neighbours. In the canton of Bern, noise protection regulations are strict to ensure peace for everyone.
Choose a location far from resting areas and neighbouring properties. Using acoustic screens or choosing a quiet model can be a wise choice. To anticipate the costs related to soundproofing or the installation itself, use the free RenoIndex estimator.
Implementation steps and tips
The implementation of your project follows several key steps : permit applications if necessary, model selection, installation, and commissioning by an authorized installer.
Systematically check the technical requirements of the canton of Bern before signing a quote. Regular maintenance of your heat pump will ensure its durability and energy performance over the long term. Do not neglect the financial planning phase.
With the RenoIndex estimator, you can get a quick and free estimate to better prepare for your future energy investments.
Your project in 5 steps
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
Grants and subsidies
No specific grant listed for this work. Maintenance tax deductions may still apply.
Companies in the area
FG Sanitaire Sàrl
1717 St. Ursen · about 30.6 km
Company based in St. Ursen specializing in sanitary installations, bathroom renovations, and various heating systems.
fg-sanitaire.chFasel-Piller Gebäudehülle AG
1716 Plaffeien · about 32.5 km
Swiss company specializing in building services, tinsmithing, roofing, and solar installations for the building envelope.
faselpillerag.chE. Vauclair SA
2504 Biel/Bienne · about 32.7 km
Operating in Biel/Bienne since 1948, E. Vauclair SA provides plumbing, heating and solar installations, architectural sheet metalwork, roofing and flat roof renovation.
vauclair.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
Frequently asked questions
Do I need a permit for a heat pump?
Yes, in the canton of Bern, the installation of a heat pump generally requires a notification or a permit application. Contact the local authorities in Worb to find out which documents are required before you start your project.
How can I get a price estimate?
You can use the free RenoIndex estimator to get a price range adapted to your renovation project in Worb. This helps you plan your budget before contacting professional companies for detailed quotes.
What is the lifespan of a heat pump?
A well-maintained heat pump generally has an average lifespan of between 15 and 20 years. Annual maintenance performed by a professional is essential to maintain its performance over this period.
Can I install a heat pump myself?
It is strongly advised against installing a heat pump yourself. A certified installation is necessary to comply with the safety standards of the canton of Bern and to benefit from the manufacturer's warranties.
Works often combined in Worb
Other works in Worb
Kitchen renovationBathroom renovationNew flooringInterior paintingWindow replacementRoof renovationFacade insulationSolar panelsHome solar batterySolar water heatingTerrace constructionFence installationStairwell renovationElevator installation or upgrade