Gyger Haustechnik
2824 Vicques · about 19 km
Gyger Haustechnik specializes in sanitary installations, heating systems, bathroom renovations, and tiling work.
gyger-co.chSolar water heating · Therwil

At a glance
Small project
CHF 9'600 – CHF 22'600
Typical project
CHF 12'400 – CHF 28'800
Large project
CHF 17'000 – CHF 39'100
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 3 m² | CHF 9'600 | CHF 22'600 | CHF 5'200 |
| Typical project | 6 m² | CHF 12'400 | CHF 28'800 | CHF 3'300 |
| Large project | 11 m² | CHF 17'000 | CHF 39'100 | CHF 2'500 |
Computed with our estimator for Therwil (regional factor included), standard finish. Only the project size changes.
Included
Not included
In Therwil, the federal building register lists 2'377 residential buildings and 4'862 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
53 % built before 1980
Construction year does not reveal past renovations: check the current insulation condition.
50 % · Gas
This distribution describes recorded buildings, not your system's consumption or efficiency.
| Energy | Heating | Hot water |
|---|---|---|
| Gas | 50 % | 43.2 % |
| Heating oil | 27 % | 13.3 % |
| District heating | 9 % | 8.7 % |
| Heat pump | 12 % | 11.5 % |
| Electricity | 1 % | 16 % |
| Wood | 2 % | 1.1 % |
| Solar thermal | 0 % | 6.1 % |
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
A standard non-condensing boiler is usually older and less efficient.
4 % of buildings mix housing with shops or offices.
For your renovation plans in Therwil, the official RegBL figures provide essential guidance. With 715 buildings under heritage protection, it is vital to contact the municipality early to discuss permit requirements. Regarding building volume, the median is 782.5 m3. However, please note that this figure is based on only 16 properties measured according to the SIA 416 standard, while 1894 properties use other standards or are categorized as unknown. Consequently, data coverage for volume is partial. Furthermore, no specific data regarding the renovation year is recorded, which should be considered during your project assessment.
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
Solar thermal collectors capture solar radiation to heat a fluid, which then transfers the heat to your hot water tank. This technology is highly efficient, as solar thermal collectors usually cover much of the hot water demand in summer.
Choosing the right roof location is essential to maximize exposure. A well-sized system tailored to the number of occupants optimizes efficiency and results in significant savings.
Use the RenoIndex estimator to get a clear picture of the installation costs from qualified professionals in your area.
It is common to pair solar thermal installations with existing heating systems or heat pumps. However, combining collectors with a heat pump needs a sizing study to ensure perfect technical compatibility.
Such a hybrid installation reduces the workload on the heat pump during sunny periods, extending its lifespan. For planning this complex integration, working with qualified professionals is crucial.
RenoIndex provides an initial budget estimate to help you compare various technical configurations for your property.
These incentives encourage the transition to renewable energy. While criteria vary, these grants can significantly reduce your upfront project costs.
To get an idea of your net investment after subsidies, use the RenoIndex estimator to simplify your financial planning process.
Opting for solar water heating in Therwil is a strategic choice that combines ecology and savings. By producing your own heat, you become less dependent on the fluctuating prices of fossil fuels.
It is also an effective way to improve your building's energy rating, which increases its resale value. A successful project requires careful planning, from sizing the panels to choosing the right installer.
RenoIndex is here to give you a clear view of costs, allowing you to compare offers with peace of mind.
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
No specific grant listed for this work. Maintenance tax deductions may still apply.
2824 Vicques · about 19 km
Gyger Haustechnik specializes in sanitary installations, heating systems, bathroom renovations, and tiling work.
gyger-co.ch2824 Vicques · about 19 km
Buchwalder Sàrl in Vicques has specialized in the installation, repair, and renovation of heating and sanitary systems since 1966.
buchwalder-sarl.ch2824 Vicques · about 19 km
Specialist since 1968 in sanitary installations, heating (gas, oil, wood, renewable energy), and tinsmithing with 24/7 emergency repair service.
sanit.ch2822 Courroux · about 19.8 km
Sanit & Bilat Fils S.A. is a company specializing in sanitary installations, heating systems, and renewable energy solutions.
sanit.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
No, solar thermal usually only covers a portion of the annual demand. In winter, sunlight is insufficient to heat water alone, requiring a boiler or heat pump as a backup system.
This depends on your hot water consumption and the number of residents. On average, count about 1 to 1.5 m² of collectors per person to cover a large part of summer needs.
Grants for solar thermal are managed at the cantonal level. Consult the official website of the canton of Basel-Landschaft or the national energy grant portal for current programs.
Yes, RenoIndex helps you get an estimated price range. This allows you to plan your budget for purchasing and professional installation of your solar system.