Koboi Démontage & Service Sàrl
2603 Péry · about 39.7 km
Company specialized in the dismantling, removal, and recycling of technical equipment such as elevators, heating, and ventilation systems.
kds.ecoElevator installation or upgrade · Therwil

At a glance
Small project
CHF 48'700 – CHF 120'300
Typical project
CHF 60'900 – CHF 150'400
Large project
CHF 85'200 – CHF 210'500
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 3 | CHF 48'700 | CHF 120'300 | CHF 26'500 |
| Typical project | 5 | CHF 60'900 | CHF 150'400 | CHF 19'800 |
| Large project | 9 | CHF 85'200 | CHF 210'500 | CHF 15'400 |
Computed with our estimator for Therwil (regional factor included), standard finish. Only the project size changes.
Included
Not included
In Therwil, the federal building register lists 2'377 residential buildings and 4'862 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
53 % built before 1980
Construction year does not reveal past renovations: check the current insulation condition.
50 % · Gas
This distribution describes recorded buildings, not your system's consumption or efficiency.
4 % of buildings mix housing with shops or offices.
For your renovation plans in Therwil, the official RegBL figures provide essential guidance. With 715 buildings under heritage protection, it is vital to contact the municipality early to discuss permit requirements. Regarding building volume, the median is 782.5 m3. However, please note that this figure is based on only 16 properties measured according to the SIA 416 standard, while 1894 properties use other standards or are categorized as unknown. Consequently, data coverage for volume is partial. Furthermore, no specific data regarding the renovation year is recorded, which should be considered during your project assessment.
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
When planning an elevator installation, the number of stops is a decisive factor for the total budget. The longer the journey, the more complex the mechanical and electronic components become.
Additionally, the potential creation of an elevator shaft is a major cost factor, as it involves significant masonry and structural adjustments. For upgrades, the cost of replacing control systems or cabins varies depending on technical requirements.
Consider these specifics when comparing quotes to avoid surprises, while using the RenoIndex simulator to accurately anticipate your total project expenses in CHF.
It is imperative to comply with the current regulations in the canton of Basel-Landschaft regarding safety and accessibility.
Owners must submit a complete application to the competent authorities to validate technical feasibility and building code compliance.
We recommend consulting an expert to prepare your application and using RenoIndex to gain an overview of the projected costs in CHF, including fees related to standards compliance.
The investment does not end with installation. An elevator requires regular maintenance to ensure user safety and equipment longevity. The annual maintenance contract should be carefully included in your quote comparison from the start.
Costs vary depending on the frequency of technical visits and the extent of repair coverage. By anticipating these recurring expenses in your financial plan, you will avoid unexpected charges.
Use the RenoIndex simulator to include these maintenance parameters and obtain a comprehensive budget estimate in CHF, allowing you to manage your installation's lifespan with confidence.
If your building already has an elevator, modernization is often an attractive alternative to total replacement. This may include replacing the control system, drive, or cabin finishes to improve energy efficiency.
Such work extends the installation's lifespan and meets current safety requirements. Plan these works well in advance by discussing with local providers.
To refine your budget, the RenoIndex simulator helps you calculate costs in CHF by comparing partial renovation options versus a complete replacement of the device.
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
No specific grant listed for this work. Maintenance tax deductions may still apply.
2603 Péry · about 39.7 km
Company specialized in the dismantling, removal, and recycling of technical equipment such as elevators, heating, and ventilation systems.
kds.eco2340 Le Noirmont · about 56 km
Carpentry and woodworking company specializing in custom wood constructions, interior fittings, and CLT structures based in Le Noirmont.
edifice-bois.ch2333 La Ferrière · about 63.6 km
Edifice LF Sàrl specializes in timber frame construction, carpentry, joinery, and the realization of bespoke timber structures.
edifice-bois.ch2300 La Chaux-de-Fonds · about 67.9 km
Specialist in timber framing, carpentry, and innovative structures such as CLT buildings and wooden elevator shafts.
edifice-bois.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
Yes, any elevator installation in an existing building requires a building permit. You must submit an application to the relevant authorities, complying with the standards of the canton of Basel-Landschaft. It is recommended to hire a professional to prepare a compliant technical file.
The cost is primarily determined by the number of floors served and the necessity of building an elevator shaft. The extent of masonry work, the chosen technical equipment, and the type of cabin also play a crucial role in the final estimated budget.
To compare effectively, ensure each quote includes the same basic services, annual maintenance costs, and warranties. Use the RenoIndex simulator to get a reference price range in CHF and identify quotes that are consistent with the market.
Yes, an elevator must be regularly maintained to meet current safety standards. The maintenance contract is essential to prevent breakdowns and ensure the long-term functionality of your equipment. Do not forget to include this cost in your budget.