Koboi Démontage & Service Sàrl
2603 Péry · about 8.7 km
Company specialized in the dismantling, removal, and recycling of technical equipment such as elevators, heating, and ventilation systems.
kds.ecoElevator installation or upgrade · Nidau

At a glance
Small project
CHF 46'400 – CHF 114'600
Typical project
CHF 58'000 – CHF 143'200
Large project
CHF 81'100 – CHF 200'500
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 3 | CHF 46'400 | CHF 114'600 | CHF 25'200 |
| Typical project | 5 | CHF 58'000 | CHF 143'200 | CHF 18'900 |
| Large project | 9 | CHF 81'100 | CHF 200'500 | CHF 14'700 |
Computed with our estimator for Nidau (regional factor included), standard finish. Only the project size changes.
Included
Not included
In Nidau, the federal building register lists 855 residential buildings and 3'707 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
82 % built before 1980
Construction year does not reveal past renovations: check the current insulation condition.
38 % · Gas
This distribution describes recorded buildings, not your system's consumption or efficiency.
12.5 % of buildings mix housing with shops or offices.
For your renovation projects in Nidau, RegBL data provides key insights. The median building volume is 1052 m3, which is essential for planning insulation or heating work, though this figure covers only a portion of the 409 houses measured according to the SIA 416 standard. Regarding heritage, one building is officially protected out of the 13 recorded cases. If your property is affected, you must contact municipal authorities early to discuss permit requirements. These structural figures help you anticipate specific constraints and project scales, ensuring that your renovation plans align with the local regulatory framework in Nidau.
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
The cost of an elevator depends on many technical parameters. The number of floors or stops to serve is the most important cost driver. If no shaft exists, constructing a new one is necessary, leading to significant masonry and structural costs.
The cabin finishes, the type of drive (hydraulic or electric), and current safety standards also influence the final price.
It is advisable to request several detailed quotes and carefully compare the services included for each chosen option to make an informed decision for your building.
You must submit a complete dossier to your municipality to verify compliance with building law and current safety standards. This process ensures that the elevator respects fire safety regulations and accessibility requirements.
Do not forget to include the time required to obtain this permit in your overall project planning to avoid delays.
An elevator requires a regular maintenance contract to ensure user safety and extend the life of the installation. When comparing quotes from manufacturers, the maintenance contract is often overlooked.
Analyze the included services carefully : inspection frequency, response times for breakdowns, and the availability of spare parts. A well-negotiated contract from the start can significantly reduce your long-term operating costs.
Use our RenoIndex tool to estimate operating expenses and ensure the profitability of your investment before committing to a specific model or provider.
If your building already has an aging elevator, the question of full modernization versus replacement arises. Modernization can focus on electronics or the cabin, while replacement involves a completely new installation.
Often, modernization is more economical and less disruptive for residents. However, if the machinery is obsolete or does not meet current cantonal standards, replacement is often unavoidable.
Always compare both options with the help of an expert to evaluate the cost-benefit ratio. RenoIndex supports you in this assessment by providing a reliable budget base for each scenario.
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
No specific grant listed for this work. Maintenance tax deductions may still apply.
2603 Péry · about 8.7 km
Company specialized in the dismantling, removal, and recycling of technical equipment such as elevators, heating, and ventilation systems.
kds.eco2340 Le Noirmont · about 24.6 km
Carpentry and woodworking company specializing in custom wood constructions, interior fittings, and CLT structures based in Le Noirmont.
edifice-bois.ch2333 La Ferrière · about 25.6 km
Edifice LF Sàrl specializes in timber frame construction, carpentry, joinery, and the realization of bespoke timber structures.
edifice-bois.ch2300 La Chaux-de-Fonds · about 29.1 km
Specialist in timber framing, carpentry, and innovative structures such as CLT buildings and wooden elevator shafts.
edifice-bois.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
The number of stops is the primary factor. The need for a new shaft, the type of drive system chosen, and cabin finishes heavily impact the final cost. It is essential to compare total quotes.
Yes, in the canton of Bern, installing an elevator in an existing building requires a building permit. This process ensures compliance with safety standards and current building laws.
Use our free RenoIndex estimator. It provides a price range based on the specifics of your project to help you plan your work realistically and efficiently.
The maintenance contract is a major recurring cost. It covers interventions, parts, and breakdown response times. Negotiating it well from the start helps optimize long-term operating costs.