Indicative price, tips, grants and companies for your project in Milvignes (Neuchâtel).
At a glance
Typical budget
CHF 7'200 – CHF 15'400
Midpoint
CHF 10'500
Grants found
0
Nearby companies
4
Worked examples in Milvignes
Small project
CHF 4'000 – CHF 9'100
Typical project
CHF 7'200 – CHF 15'400
Large project
CHF 12'400 – CHF 25'400
Project
Quantity
Low
High
Per unit
Small project
5 kWh
CHF 4'000
CHF 9'100
CHF 1'200
Typical project
10 kWh
CHF 7'200
CHF 15'400
CHF 1'100
Large project
18 kWh
CHF 12'400
CHF 25'400
CHF 1'000
Computed with our estimator for Milvignes (regional factor included), standard finish. Only the project size changes.
Cost split (typical project)
Labour :CHF 2'100(20 %)
Materials :CHF 7'300(70 %)
Other costs :CHF 1'100(10 %)
What the price covers
Included
Supply and installation
VAT
Battery, charge management and standard connection; options according to answers
Not included
Permits and architect fees
Unexpected structural issues
Possible subsidies
Solar panels and complete electrical refurbishment
Milvignes's housing stock in figures
In Milvignes, the federal building register lists 1'788 residential buildings and 4'730 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
63 %built before 1980
73 %heated by oil or gas
5.8 %electric hot water
15.7 %with declared solar thermal
Age of residential buildings
63 % built before 1980
Before 191921 %
1919–19458 %
1946–196012 %
1961–197013 %
1971–19809 %
1981–199010 %
1991–20008 %
2001–20109 %
Since 201110 %
Construction year does not reveal past renovations: check the current insulation condition.
Main heating energy
42 % · Gas
Gas42 %
Heating oil31 %
Heat pump16 %
District heating7 %
Wood2 %
Electricity1 %
Solar thermal1 %
This distribution describes recorded buildings, not your system's consumption or efficiency.
Heating and hot water: which energies?
Energy
Heating
Hot water
Gas
42 %
32.5 %
Heating oil
31 %
28.1 %
District heating
7 %
6.3 %
Heat pump
16 %
12.5 %
Electricity
1 %
5.8 %
Wood
2 %
0.9 %
Solar thermal
1 %
13.5 %
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
Type of heating system
Boiler (unspecified)68.8 %
Heat pump16.2 %
Heat exchanger (district)6.8 %
Condensing boiler5.7 %
Stove1 %
A standard non-condensing boiler is usually older and less efficient.
Houses or apartment buildings?
Single-family houses60.8 %
Two-dwelling houses12 %
Apartment buildings (3+)27.2 %
Other0.1 %
8.9 % of buildings mix housing with shops or offices.
The typical building
storeys (median)
3
median footprint
136 m²
median dwelling area
94 m²
Renovations, heritage and volumes
When planning renovations in Milvignes, official RegBL data provides essential context for your project. With 4 buildings under heritage protection identified from 94 known records, owners should contact local authorities early to discuss permit requirements. The median house volume is 702 m3 for 1087 properties, a key figure for estimating insulation or heating upgrade costs. Please note that data coverage is partial; only 33 buildings have volume measurements based on the SIA 416 standard, and there is no recorded data available regarding renovation years. Always verify these structural details to ensure accurate budget planning for your specific home.
4
buildings flagged as protected
status known for 94 of 1'788 buildings; check with the municipality
A battery is worthwhile when solar output clearly exceeds your daytime use.
Size capacity by evening consumption, not panel power.
Check compatibility with your existing inverter before buying.
Your project in 5 steps
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
Grants and subsidies
No specific grant listed for this work. Maintenance tax deductions may still apply.
Companies in the area
swisspro SR SA
2014 Bôle · about 2.7 km
swisspro is a company specializing in electrical installations, charging infrastructure for electric vehicles, and intelligent building automation solutions.
Suggestions from the commercial register by distance and activity. Not an endorsement or partnership.
Useful local data
Rules of the canton of Neuchâtel
These rules apply across the whole canton, not only in this town.
Tax deductions
Carry-forward : Seule la part des frais d'investissement destinés à économiser l'énergie et à ménager l'environnement ainsi que les frais de démolition en vue d'une construction de remplacement, qui n'a pas pu être déduite l'année de facturation (année N) car elle aurait engendré un revenu net négatif, peut être reportée sur les deux années fiscales suivantes (N+1 et N+2). Ces frais doivent avoir été intégralement déclarés l'année de leur facturation. Si des frais sont reportés, la déduction forfaitaire n'est pas possible pour l'immeuble concerné pour la période fiscale correspondante. Le droit de reporter est réservé au propriétaire ayant supporté les frais. L'Intendance des impôts détermine d'office les frais reportables.
Flat rate deduction : 10% du rendement brut des loyers ou de la valeur locative (max. 7 200 CHF) si l'âge du bâtiment est inférieur ou égal à dix ans; 20% du rendement brut des loyers ou de la valeur locative (max. 12 000 CHF) si l'âge du bâtiment est supérieur à dix ans. Aucune autre déduction supplémentaire n'est possible avec le forfait. Les propriétaires d'immeubles commerciaux affectés à leur activité indépendante ne peuvent pas opter pour la déduction forfaitaire pour ces immeubles, mais c'est possible pour d'autres immeubles de leur fortune privée.
Maintenance costs : Le/la contribuable peut choisir, lors de chaque période fiscale et pour chaque immeuble, entre la déduction des frais effectifs et la déduction forfaitaire. Les frais effectifs déductibles sont ceux visant à maintenir la valeur de l'immeuble, facturés durant l'année de calcul. Si les dépenses comportent des dépenses d’entretien, d’amélioration et/ou d’économies d’énergie, une répartition par nature est nécessaire selon un catalogue de répartition.
Energy investments : Les investissements destinés à économiser l’énergie et à ménager l’environnement (remplacement d'éléments vétustes ou adjonction d'éléments/installations dans les bâtiments existants) sont déductibles. Ces frais peuvent être reportés sur les deux années fiscales suivantes s'ils n'ont pas pu être déduits intégralement l'année de facturation (N, N+1, N+2).