Hallenbarter & Russi Gebäudetechnik AG
3988 Obergoms · about 101.6 km
Obergoms-based company specializing in sanitary installations, heating systems, roofing, and tinsmith work for new builds and renovations.
hallenbarter-russi.chHeat pump installation · Mels
Heat pump installation in Mels: Renovation guide
Switching to a heat pump in Mels is a key step to modernise your heating system and reduce your carbon footprint. This project requires careful planning, from the technical assessment of your building to complying with neighborhood noise regulations. Whether you are renovating an older home or planning a new installation, it is essential to understand local conditions and technical requirements. To get an accurate estimate of the budget for your renovation, use our free RenoIndex estimator today to plan your project with confidence.
At a glance
- Typical budget
- CHF 42'400 – CHF 78'900
- Midpoint
- CHF 59'300
- Grants found
- 0
- Nearby companies
- 4
Worked examples in Mels
Small project
CHF 33'500 – CHF 61'400
Typical project
CHF 42'400 – CHF 78'900
Large project
CHF 55'600 – CHF 105'200
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 80 m² | CHF 33'500 | CHF 61'400 | CHF 600 |
| Typical project | 160 m² | CHF 42'400 | CHF 78'900 | CHF 400 |
| Large project | 280 m² | CHF 55'600 | CHF 105'200 | CHF 300 |
Computed with our estimator for Mels (regional factor included), standard finish. Only the project size changes.
Cost split (typical project)
- Labour : CHF 23'700 (40 %)
- Materials : CHF 29'600 (50 %)
- Other costs : CHF 5'900 (10 %)
What the price covers
Included
- Supply and installation
- VAT
- Heat pump and standard connections; removal and equipment only according to answers
Not included
- Permits and architect fees
- Unexpected structural issues
- Possible subsidies
- Drilling beyond 150 m, buried or contaminated tank, asbestos, insulation and new finishes
- With air-to-air: hot water and ducts only if selected; adaptations beyond the options excluded
Mels's housing stock in figures
In Mels, the federal building register lists 2'381 residential buildings and 4'640 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
Age of residential buildings
56 % built before 1980
- Before 191917 %
- 1919–19458 %
- 1946–19608 %
- 1961–197011 %
- 1971–198012 %
- 1981–199010 %
- 1991–200013 %
- 2001–20109 %
- Since 201111 %
Construction year does not reveal past renovations: check the current insulation condition.
Main heating energy
35 % · Heating oil
- Heating oil35 %
- Heat pump30 %
- Wood21 %
- Gas10 %
- District heating3 %
- Electricity1 %
This distribution describes recorded buildings, not your system's consumption or efficiency.
Heating and hot water: which energies?
| Energy | Heating | Hot water |
|---|---|---|
| Gas | 10 % | 5.8 % |
| Heating oil | 35 % | 26.7 % |
| District heating | 3 % | 1.5 % |
| Heat pump | 30 % | 29.9 % |
| Electricity | 1 % | 20.9 % |
| Wood | 21 % | 8.7 % |
| Solar thermal | 0 % | 6.5 % |
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
Type of heating system
- Boiler (unspecified)64.4 %
- Heat pump29.8 %
- Heat exchanger (district)3.1 %
- Condensing boiler1.2 %
- Central electric heating0.8 %
- Direct electric heaters0.5 %
A standard non-condensing boiler is usually older and less efficient.
Renovations, heritage and volumes
For renovation planning in Mels, official building register figures offer key insights. With 15 buildings identified as heritage-protected out of 123 known cases, you must contact local authorities early to confirm permit requirements. Regarding building scale, the median volume is recorded at 1238 m3 according to SIA 416 standards, though it is important to note that data coverage is significantly partial. These figures help homeowners estimate the scope of heating or insulation upgrades. Leveraging this data ensures you are well-prepared for the regulatory and structural realities of renovating your specific property within the municipality.
15
buildings flagged as protected
status known for 123 of 2'381 buildings; check with the municipality
1'238 m³
median house volume (SIA 416)
measured for 1 of 1'780 houses
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
Heating network compatibility check
Before starting work on a heat pump in Mels, you must check whether your neighborhood is part of a priority zone for district heating. In some areas, connection to a collective thermal network is preferred for energy efficiency and land-use planning reasons.
Always verify the current status with municipal authorities. If district heating is not planned or available, a heat pump is an excellent sustainable and high-performance alternative for heating your home efficiently and reliably throughout the year.
Sizing based on local climate
The correct sizing of your future heat pump depends directly on the local design outdoor temperature. In Mels, the climate influences the power needed to maintain constant thermal comfort during the coldest months.
An undersized unit will not be enough to heat your home, while an oversized model will unnecessarily increase your investment costs and reduce the overall efficiency of the system.
Consulting a qualified professional is therefore crucial to accurately calculate your building's thermal needs and choose equipment perfectly suited to your specific situation.
Compliance with noise regulations
When placing the unit in your garden or near a wall, ensure you choose a location that minimizes sound propagation toward neighboring properties. It is often advisable to install acoustic barriers or opt for silent technology models.
Careful planning helps avoid noise pollution and ensures compliance with current regulations regarding noise emissions in residential areas.
Cost estimation and total budget
Investing in a heat pump includes the price of the unit, installation costs, hydraulic connection, and any necessary adaptations to your current heating circuit. To get a clear view of your budget, it is recommended to use reliable simulation tools.
RenoIndex allows you to quickly obtain an estimated price range for your project in Mels.
By anticipating the total costs from the beginning, you can compare different solutions and choose the equipment that offers the best balance between initial investment and long-term energy savings for your home.
Your project in 5 steps
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
Grants and subsidies
No specific grant listed for this work. Maintenance tax deductions may still apply.
Companies in the area
TZ Stromag, Filiale Raron
3942 Raron · about 145.4 km
TZ Stromag is a full-service provider of electrical engineering for buildings, covering installations, automation, security, and in-house switchgear construction.
stromag.chF. Imeri Sàrl
2829 Vermes · about 149.4 km
The website presented under the name Imeri Chauffage et Sanitaire Sàrl offers plumbing, heating and solar thermal work, while F. Imeri Sàrl’s registered purpose refers to a scrap metal business.
imeri-sarl.chEco6therm Sàrl
2832 Rebeuvelier · about 154.4 km
Eco6therm specializes in the installation of heating systems, particularly heat pumps, and solar photovoltaic energy solutions.
eco6therm.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
Frequently asked questions
How can I estimate the cost of my installation?
Use the free RenoIndex tool to get a price range based on your specific needs. It considers the type of heat pump and the features of your building to provide you with a reliable estimate of the total cost for the renovation work.
Do I need a permit for my heat pump?
Yes, installing a heat pump generally requires a notification or a building permit from local authorities. Check with your municipality to understand the specific procedures in force and the technical documents required for your application.
Is a heat pump suitable for older houses?
Absolutely, but good insulation is recommended to optimize efficiency. In older houses, it may be necessary to adapt the distribution system, such as replacing radiators with low-temperature models to improve overall performance.
What is the lifespan of a heat pump?
On average, a well-maintained heat pump has a lifespan of 15 to 20 years. Annual maintenance by a qualified professional is essential to ensure proper operation and extend the performance of the equipment over the long term.
Works often combined in Mels
Other works in Mels
Kitchen renovationBathroom renovationNew flooringInterior paintingWindow replacementRoof renovationFacade insulationSolar panelsHome solar batterySolar water heatingTerrace constructionFence installationStairwell renovationElevator installation or upgrade