Eco6therm Sàrl
2832 Rebeuvelier · about 58.4 km
Eco6therm specializes in the installation of heating systems, particularly heat pumps, and solar photovoltaic energy solutions.
eco6therm.chHome solar battery · Lenzburg

At a glance
Small project
CHF 4'000 – CHF 9'100
Typical project
CHF 7'200 – CHF 15'400
Large project
CHF 12'400 – CHF 25'400
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 5 kWh | CHF 4'000 | CHF 9'100 | CHF 1'200 |
| Typical project | 10 kWh | CHF 7'200 | CHF 15'400 | CHF 1'100 |
| Large project | 18 kWh | CHF 12'400 | CHF 25'400 | CHF 1'000 |
Computed with our estimator for Lenzburg (regional factor included), standard finish. Only the project size changes.
Included
Not included
In Lenzburg, the federal building register lists 1'562 residential buildings and 5'679 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
64 % built before 1980
Construction year does not reveal past renovations: check the current insulation condition.
45 % · Gas
This distribution describes recorded buildings, not your system's consumption or efficiency.
| Energy | Heating | Hot water |
|---|---|---|
| Gas | 45 % | 37.6 % |
| Heating oil | 17 % | 12.7 % |
| District heating | 11 % | 8.3 % |
| Heat pump | 22 % | 7.1 % |
| Electricity | 2 % | 30.3 % |
| Wood | 3 % | 2.2 % |
| Solar thermal | 0 % | 1.3 % |
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
A standard non-condensing boiler is usually older and less efficient.
11.8 % of buildings mix housing with shops or offices.
For your renovation plans in Lenzburg, official building registry data provides vital insights. With 219 buildings listed under heritage protection, it is essential to contact the municipality early to clarify permit requirements. The median building volume is 820 m3, a figure based on 6 buildings measured according to the SIA 416 standard, indicating that data coverage is partial for this metric. Understanding these values helps you accurately assess the scale of your planned heating and insulation upgrades, ensuring you approach your renovation project with the correct regulatory expectations and realistic dimensional estimates from the start.
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
A battery is worthwhile when solar output clearly exceeds your daytime use. By storing the surplus energy produced during sunny hours, you reduce your reliance on the grid.
This allows you to meet your energy needs during the evening and night, when solar panels are inactive.
Increased autonomy is a major asset for any homeowner looking to improve their property value while achieving long-term savings on household electricity bills. Investing in storage turns your existing installation into a more efficient power source.
Size capacity by evening consumption, not panel power. Over-sizing your battery leads to unnecessary costs, while under-sizing limits your potential savings. Furthermore, always check compatibility with your existing inverter before buying any hardware.
Some systems are designed to work exclusively with specific hybrid inverters.
Consulting a qualified professional allows you to tailor the storage capacity to your household's actual habits, ensuring a durable and efficient setup that works seamlessly with your current energy infrastructure.
While there are no specific municipal grants mentioned for Lenzburg, it is advisable to check cantonal programs periodically.
Ensure that your certified installer carries out the necessary declarations to guarantee that your solar installations and battery meet national technical standards and operate safely.
The cost of a solar battery depends on the technology and the storage capacity required for your household. To avoid unpleasant surprises, use the RenoIndex simulator for free to get a price range adapted to your project.
This estimate allows you to compare installer offers with a clear view of the market. Remember to include professional installation costs, as proper mounting is key to the longevity of your storage system and the safety of your home.
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
No specific grant listed for this work. Maintenance tax deductions may still apply.
2832 Rebeuvelier · about 58.4 km
Eco6therm specializes in the installation of heating systems, particularly heat pumps, and solar photovoltaic energy solutions.
eco6therm.ch2735 Malleray · about 70 km
Company specialized in electrical installations and telecommunications systems, including network infrastructure and related trade.
telecrengglisa.ch2605 Sonceboz-Sombeval · about 79 km
Solar conseil Sàrl specializes in the installation of photovoltaic power plants, energy storage solutions, and energy efficiency consulting in the Jura and Bernese Jura regions.
solarconseil.ch2718 Lajoux JU · about 79.5 km
Jura-based specialist in photovoltaic panel installation and energy storage solutions with AI-driven optimization.
hypersolaire.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
Most modern lithium batteries installed in Switzerland have a lifespan of between 10 and 15 years. This figure strongly depends on the number of charge cycles and the temperature management within your utility room.
Yes, it is entirely possible to add a battery to an existing solar installation. However, it is mandatory to verify the technical compatibility with your current inverter or to consider adding a dedicated hybrid inverter.
It is best to install the battery in a dry, temperate, and well-ventilated room, such as a basement. Extreme temperatures can significantly reduce performance and longevity. Avoid areas that are prone to moisture.
This depends on your equipment. Some batteries are designed to provide backup power, but this function must be specifically planned and installed by a professional during the configuration of your home energy system.