Eco6therm Sàrl
2832 Rebeuvelier · about 65.1 km
Eco6therm specializes in the installation of heating systems, particularly heat pumps, and solar photovoltaic energy solutions.
eco6therm.chHome solar battery · Wohlen (AG)

At a glance
Small project
CHF 4'000 – CHF 9'100
Typical project
CHF 7'200 – CHF 15'400
Large project
CHF 12'400 – CHF 25'400
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 5 kWh | CHF 4'000 | CHF 9'100 | CHF 1'200 |
| Typical project | 10 kWh | CHF 7'200 | CHF 15'400 | CHF 1'100 |
| Large project | 18 kWh | CHF 12'400 | CHF 25'400 | CHF 1'000 |
Computed with our estimator for Wohlen (AG) (regional factor included), standard finish. Only the project size changes.
Included
Not included
In Wohlen (AG), the federal building register lists 3'190 residential buildings and 8'173 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
51 % built before 1980
Construction year does not reveal past renovations: check the current insulation condition.
39 % · Gas
This distribution describes recorded buildings, not your system's consumption or efficiency.
| Energy | Heating | Hot water |
|---|---|---|
| Gas | 39 % | 31.8 % |
| Heating oil | 32 % | 25.3 % |
| Heat pump | 23 % | 7.8 % |
| Electricity | 1 % | 30.7 % |
| Wood | 4 % | 3.3 % |
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
A standard non-condensing boiler is usually older and less efficient.
6.4 % of buildings mix housing with shops or offices.
For renovation projects in Wohlen, RegBL data shows that out of 3190 registered buildings, 693 are under heritage protection, necessitating early consultation with the municipality regarding permits. Regarding building volume, data coverage is partial, with only 29 buildings measured according to the SIA 416 standard, showing a median of 920 m3. These volume figures are vital for determining the scope of heating or insulation works. Please note that the renovation year is not available for this municipality, preventing analysis based on building age. We recommend using these official figures as a foundation while acknowledging the specific limitations in current data coverage.
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
A battery is worthwhile when your solar output clearly exceeds your daytime use. By storing the surplus, you avoid feeding all the energy back into the grid and increase your domestic self-consumption rate.
It is the ideal solution to run energy-hungry appliances during the evenings while making the most of every kilowatt-hour produced on your roof.
Before you start, ensure your project is properly sized by using the RenoIndex tool for a cost estimate in CHF tailored to your specific needs.
The golden rule for a successful installation is to size the battery capacity based on your evening consumption, rather than the peak power of your solar panels.
An oversized system unnecessarily increases your initial investment without providing a quick return. Analyze your evening usage habits to choose a suitable model.
To visualize various pricing options, check the RenoIndex estimator, which will quickly provide a cost range in CHF for your project in Wohlen.
Before any purchase, it is imperative to check the technical compatibility of the battery with your existing inverter.
Some inverters are not natively equipped to handle battery storage, sometimes requiring the addition of a hybrid inverter or a coupling system. A prior check with a qualified professional avoids unexpected extra costs during assembly.
To better anticipate the overall budget of your solar installation, access our RenoIndex tool for free to receive a clear estimate of costs in CHF.
Carrying out a solar storage project in Wohlen requires rigorous planning to ensure the economic viability of your installation.
Consider the physical location of the storage unit, which should ideally be installed in a temperate, dry area to preserve the lifespan of the lithium cells. In addition to the technical aspects, ensure you compare multiple quotes from local installers.
Use the RenoIndex estimator now to get a reference estimate in CHF and start your project with all the necessary information at hand.
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
No specific grant listed for this work. Maintenance tax deductions may still apply.
2832 Rebeuvelier · about 65.1 km
Eco6therm specializes in the installation of heating systems, particularly heat pumps, and solar photovoltaic energy solutions.
eco6therm.ch2735 Malleray · about 76.3 km
Company specialized in electrical installations and telecommunications systems, including network infrastructure and related trade.
telecrengglisa.ch2605 Sonceboz-Sombeval · about 85.1 km
Solar conseil Sàrl specializes in the installation of photovoltaic power plants, energy storage solutions, and energy efficiency consulting in the Jura and Bernese Jura regions.
solarconseil.ch2718 Lajoux JU · about 86.2 km
Jura-based specialist in photovoltaic panel installation and energy storage solutions with AI-driven optimization.
hypersolaire.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
Generally, modern lithium batteries require very little maintenance. However, it is advisable to have the proper functioning of the inverter and electrical connections checked annually by a qualified professional to ensure the safety and optimal performance of your storage system.
Battery installation involves significant electrical risks and must be carried out by a certified professional. In Switzerland, electrical work often requires specific authorization. Entrusting this task to an expert guarantees compliance with safety standards and the validity of manufacturer warranties.
The lifespan of a home battery generally varies between 10 and 15 years. This figure depends on the number of charging cycles and environmental conditions like ambient temperature. Regular monitoring by an installer often helps to maximize this longevity.
Yes, it is entirely possible to add a battery to an existing installation, provided you choose a system compatible with your inverter. Sometimes, adding a hybrid inverter is necessary. Consult a specialist to assess the ideal technical configuration for your situation.