Heat pump installation · Heimberg

Heat pump installation in Heimberg: Complete guide

Are you planning to install a heat pump in Heimberg? This energy transition is an excellent decision to reduce heating costs and your environmental footprint. However, a successful project requires rigorous preparation, from technical sizing to local noise standards. In this guide, we cover the essential points to carry out your installation with peace of mind. To obtain a precise estimate of costs adapted to your home, do not hesitate to use our free RenoIndex estimator.
Heat pump installation – Heimberg

At a glance

Typical budget
CHF 38'600 – CHF 71'900
Midpoint
CHF 54'000
Grants found
0
Nearby companies
4

Worked examples in Heimberg

Small project

CHF 30'600 – CHF 55'900

Typical project

CHF 38'600 – CHF 71'900

Large project

CHF 50'600 – CHF 95'800

ProjectQuantityLowHigh
Small project80 m²CHF 30'600CHF 55'900
Typical project160 m²CHF 38'600CHF 71'900
Large project280 m²CHF 50'600CHF 95'800

Computed with our estimator for Heimberg (regional factor included), standard finish. Only the project size changes.

Cost split (typical project)

  • Labour : CHF 21'600 (40 %)
  • Materials : CHF 27'000 (50 %)
  • Other costs : CHF 5'400 (10 %)

What the price covers

Included

  • Supply and installation
  • VAT
  • Heat pump and standard connections; removal and equipment only according to answers

Not included

  • Permits and architect fees
  • Unexpected structural issues
  • Possible subsidies
  • Drilling beyond 150 m, buried or contaminated tank, asbestos, insulation and new finishes
  • With air-to-air: hot water and ducts only if selected; adaptations beyond the options excluded

Heimberg's housing stock in figures

In Heimberg, the federal building register lists 1'299 residential buildings and 3'407 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.

47 %built before 1980
57 %heated by oil or gas
43.4 %electric hot water
2.2 %with declared solar thermal

Age of residential buildings

47 % built before 1980

  • Before 19197 %
  • 1919–19455 %
  • 1946–196011 %
  • 1961–19709 %
  • 1971–198015 %
  • 1981–199017 %
  • 1991–200014 %
  • 2001–201015 %
  • Since 20117 %

Construction year does not reveal past renovations: check the current insulation condition.

Main heating energy

52 % · Heating oil

  • Heating oil52 %
  • Heat pump31 %
  • Gas5 %
  • Wood5 %
  • Electricity3 %
  • District heating2 %

This distribution describes recorded buildings, not your system's consumption or efficiency.

Heating and hot water: which energies?

EnergyHeatingHot water
Gas5 %5.5 %
Heating oil52 %35.7 %
District heating2 %1.5 %
Heat pump31 %8.6 %
Electricity3 %43.4 %
Wood5 %3.1 %
Solar thermal0 %2.2 %

Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.

Type of heating system

  • Boiler (unspecified)42.9 %
  • Heat pump31.5 %
  • Standard boiler14.8 %
  • Condensing boiler2.7 %
  • Stove2.7 %
  • Heat exchanger (district)2.2 %
  • Central electric heating2.2 %
  • Direct electric heaters0.9 %

A standard non-condensing boiler is usually older and less efficient.

Renovations, heritage and volumes

For homeowners planning renovations in Heimberg, the official building register (RegBL) currently provides limited guidance due to significant gaps in data coverage. With 1299 buildings registered, there is no available data regarding the median renovation year or the specific building volume according to SIA 416 standards for the 809 houses listed. Furthermore, the records show no entries regarding heritage protection status for these properties. Given this lack of specific figures in the registry, it is essential to consult with your local municipal authorities early in your planning process to obtain accurate information regarding structural requirements and potential heritage constraints.

0
buildings flagged as protected
status known for 102 of 1'299 buildings; check with the municipality

Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.

Analysis of the heating area

Before starting your project, it is crucial to check whether your area can connect to a priority district heating network. In many areas, the development of thermal networks is prioritized to optimize collective energy efficiency.

Checking municipal plans helps avoid unnecessary investments in a heat pump if a network solution is planned in the short term.

This preliminary step ensures you choose the most sustainable and cost-effective heating technology for your property in Heimberg in the long run.

Sizing and capacity

The sizing of a heat pump should never be taken lightly. The local design outdoor temperature is the key factor that determines the necessary capacity of your heat pump.

An undersized system will not meet your needs during harsh winters, while an oversized system will lead to inefficient operating cycles and premature wear.

It is highly recommended to appoint a professional to perform a precise calculation of your building's heat loss, thus ensuring optimal thermal comfort throughout the year.

Compliance with noise standards

The installation of an outdoor air-water heat pump requires special attention regarding noise emissions. These units must strictly comply with noise limits imposed on neighbours, in accordance with federal requirements.

It is advisable to position the outdoor unit away from resting areas, such as bedrooms, and use acoustic screens if necessary. Careful planning not only ensures compliance with the law but also helps maintain good relations with your neighbours.

Remember to check the technical noise specifications when choosing your equipment.

Cost estimation and budget

The total cost of a heat pump installation depends on several variables: the necessary capacity, the complexity of the hydraulic installation, and any renovation work on your distribution system like radiators or underfloor heating.

It is essential to provide a margin for these contingencies. To get a clear vision and a price range adapted to your home in Heimberg, use the free RenoIndex service.

Our online estimator will provide valuable indications to better budget your project before requesting quotes from local companies.

Your project in 5 steps

  1. 1. Estimate

    Set a budget range with the estimator.

  2. 2. Grants

    Apply before work starts.

  3. 3. Quotes

    Compare at least 3 quotes.

  4. 4. Permit

    Check with the municipality whether a permit is needed.

  5. 5. Works

    Follow the site and do a written handover.

Grants and subsidies

No specific grant listed for this work. Maintenance tax deductions may still apply.

Companies in the area

Fasel-Piller Gebäudehülle AG

1716 Plaffeien · about 26.1 km

Swiss company specializing in building services, tinsmithing, roofing, and solar installations for the building envelope.

faselpillerag.ch

FG Sanitaire Sàrl

1717 St. Ursen · about 29.2 km

Company based in St. Ursen specializing in sanitary installations, bathroom renovations, and various heating systems.

fg-sanitaire.ch

Enosis Sàrl

3213 Liebistorf · about 33.1 km

Enosis develops biomethanation technologies to convert CO2 and surplus electricity into storable and sustainable green gas.

enosis-energies.com

RP Technique Sàrl

1724 Le Mouret · about 33.1 km

Fribourg specialist in heating, ventilation, and plumbing, expert in water treatment, technical maintenance, and HVAC troubleshooting.

rptechnique.ch

Suggestions from the commercial register by distance and activity. Not an endorsement or partnership.

Frequently asked questions

Is a permit required for a heat pump in Heimberg?

Generally, a permit application is required in the canton of Bern. It is advisable to contact the local planning department before placing any orders to check for specific municipal requirements related to noise or landscape integration.

How long does the installation take?

A typical air-water heat pump installation generally takes between three and five working days. The duration may vary depending on the state of your existing heating system and the extent of the hydraulic connection work required on site.

What are the benefits of a heat pump vs gas?

The heat pump uses renewable energy from the air, reducing your CO2 emissions. It is less dependent on fluctuations in fossil fuel prices and adds value to your property in the long term.

How to get a reliable price range?

For a quick and free estimate, use the online RenoIndex tool. It allows you to compare costs based on your specific criteria to better prepare your energy renovation project in the canton of Bern.

Works often combined in Heimberg

Other works in Heimberg

Heat pump installation in nearby towns