Solar water heating · Egg
At a glance
Small project
CHF 10'300 – CHF 24'100
Typical project
CHF 13'200 – CHF 30'700
Large project
CHF 18'200 – CHF 41'800
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 3 m² | CHF 10'300 | CHF 24'100 | CHF 5'600 |
| Typical project | 6 m² | CHF 13'200 | CHF 30'700 | CHF 3'500 |
| Large project | 11 m² | CHF 18'200 | CHF 41'800 | CHF 2'600 |
Computed with our estimator for Egg (regional factor included), standard finish. Only the project size changes.
Included
Not included
In Egg, the federal building register lists 1'765 residential buildings and 4'094 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
55 % built before 1980
Construction year does not reveal past renovations: check the current insulation condition.
44 % · Heating oil
This distribution describes recorded buildings, not your system's consumption or efficiency.
| Energy | Heating | Hot water |
|---|---|---|
| Gas | 2 % | 1.5 % |
| Heating oil | 44 % | 36.6 % |
| District heating | 1 % | 0.8 % |
| Heat pump | 44 % | 35.6 % |
| Electricity | 2 % | 19.5 % |
| Wood | 7 % | 3.3 % |
| Solar thermal | 0 % | 2 % |
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
A standard non-condensing boiler is usually older and less efficient.
8.7 % of buildings mix housing with shops or offices.
For your renovation plans in Egg, the official building register data provides useful insights. With a median house volume of 1040 cubic meters, this figure helps you assess the scale of necessary heating or insulation work. Please note that data coverage for volume is partial, based on only 15 buildings measured according to the SIA 416 standard out of 1242 total houses. These metrics allow you to better anticipate the budget required for your renovation project by considering the structural dimensions typical for properties in this municipality, ensuring a well-planned approach to your home improvement efforts.
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
Solar thermal collectors usually cover much of summer hot water, reducing reliance on fossil fuels. By using solar radiation to heat your water, you lower your CO2 emissions while gaining energy independence.
It is a sustainable investment that adds value to your property in the long term. In the canton of Zurich, integrating such solutions aligns perfectly with energy transition policies.
Before starting your work in Egg, ensure you evaluate your actual hot water needs and the available roof surface to optimize performance.
Combining collectors with a heat pump needs a sizing study. This hybrid approach allows you to optimize the overall efficiency of your heating system. Incorrect sizing could lead to summer overheating or insufficient production in winter.
It is crucial to consult qualified professionals to validate compatibility with your current equipment. In Egg, specific building characteristics must be taken into account from the start of the project.
RenoIndex helps you visualize average costs to better budget your installation according to your technical choices.
It is important to check the terms of eligibility before starting work, as applications often need to be submitted beforehand.
By using the RenoIndex estimator, you can get a clear overview of construction costs and include potential subsidies in your financial calculations.
A successful solar thermal project in Egg starts with a technical feasibility study. First, analyze the orientation and inclination of your roof, as these factors determine the performance of your future collectors.
Then, request several quotes from certified companies to compare offers. Ensure the installer complies with the safety and quality standards in force in the canton of Zurich. Finally, check with your municipality if a building permit is required.
To get a quick and free initial budget range for your work, use our RenoIndex estimator now.
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
No specific grant listed for this work. Maintenance tax deductions may still apply.
2829 Vermes · about 90.7 km
The website presented under the name Imeri Chauffage et Sanitaire Sàrl offers plumbing, heating and solar thermal work, while F. Imeri Sàrl’s registered purpose refers to a scrap metal business.
imeri-sarl.ch2824 Vicques · about 95.2 km
Buchwalder Sàrl in Vicques has specialized in the installation, repair, and renovation of heating and sanitary systems since 1966.
buchwalder-sarl.ch2824 Vicques · about 95.2 km
Specialist since 1968 in sanitary installations, heating (gas, oil, wood, renewable energy), and tinsmithing with 24/7 emergency repair service.
sanit.ch2824 Vicques · about 95.2 km
Gyger Haustechnik specializes in sanitary installations, heating systems, bathroom renovations, and tiling work.
gyger-co.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
Profitability depends on installation costs, your water consumption, and available subsidies. In the canton of Zurich, there is enough sunshine to ensure a good return on investment over time. Use RenoIndex to estimate your budget and calculate the profitability.
Generally, roof-mounted solar installations are subject to a notification procedure in the canton of Zurich. However, it is recommended to contact the local planning department to confirm the applicable rules before installation.
The canton of Zurich offers various incentive programmes via the Building Programme. It is advisable to check the official canton portal to verify the eligibility of your project and the exact amounts based on area or capacity.
The area depends on the number of residents and collector performance. On average, allow for about 1 to 1.5 m² per person. A technical study by a professional in Egg will allow for precise sizing to meet your specific needs.
