Eco6therm Sàrl
2832 Rebeuvelier · about 107.5 km
Eco6therm specializes in the installation of heating systems, particularly heat pumps, and solar photovoltaic energy solutions.
eco6therm.chHome solar battery · Altendorf

At a glance
Small project
CHF 4'400 – CHF 10'200
Typical project
CHF 8'100 – CHF 17'200
Large project
CHF 13'900 – CHF 28'500
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 5 kWh | CHF 4'400 | CHF 10'200 | CHF 1'400 |
| Typical project | 10 kWh | CHF 8'100 | CHF 17'200 | CHF 1'200 |
| Large project | 18 kWh | CHF 13'900 | CHF 28'500 | CHF 1'100 |
Computed with our estimator for Altendorf (regional factor included), standard finish. Only the project size changes.
Included
Not included
In Altendorf, the federal building register lists 1'312 residential buildings and 3'479 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
34 % built before 1980
Construction year does not reveal past renovations: check the current insulation condition.
33 % · Heat pump
This distribution describes recorded buildings, not your system's consumption or efficiency.
| Energy | Heating | Hot water |
|---|---|---|
| Gas | 15 % | 10.8 % |
| Heating oil | 31 % | 28.1 % |
| District heating | 2 % | 1.8 % |
| Heat pump | 33 % | 7.5 % |
| Electricity | 6 % | 38.7 % |
| Wood | 13 % | 8.9 % |
| Solar thermal | 0 % | 1.5 % |
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
A standard non-condensing boiler is usually older and less efficient.
13.2 % of buildings mix housing with shops or offices.
For your renovation plans in Altendorf, federal building registry data provides vital insights for your budget. The median house volume is recorded at 1250 m3 according to the SIA 416 standard, which is essential for scaling heating and insulation requirements. Please be aware that data coverage is partial, as 800 buildings rely on other or unknown standards. Regarding heritage protection, information is missing for most of the housing stock. We strongly recommend contacting the municipal authorities early in your planning process to clarify any building restrictions or permit requirements before proceeding with your renovation project.
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
A battery is worthwhile when solar output clearly exceeds your daytime use. By storing the surplus, you can use your own energy during peak evening hours when panels no longer produce electricity.
This is the most effective way to increase your energy independence while limiting costs associated with buying electricity from the grid.
Remember to evaluate your consumption habits before starting your project in order to maximize the return on investment of your installation.
The secret to a successful installation lies in proper sizing. Do not choose the storage capacity based on the power of your panels, but rather based on your actual evening and nighttime consumption.
Excessive capacity will unnecessarily increase your initial investment without real gains, while a battery that is too small will not cover your needs.
Analyzing your past electricity consumption bills will help you define the ideal size for your home in Altendorf.
Before any purchase, it is essential to check compatibility with your existing inverter. Depending on the system type (AC or DC coupling), technical adjustments may be required.
It is recommended to contact a professional installer to perform a technical study on-site. The installer can ensure that safety conditions are met and that your electrical panel can accommodate the new components.
A certified installation ensures the longevity of your equipment and the safety of your home.
The cost of a solar battery depends on several factors, particularly the chosen technology and the storage capacity in kWh. Although prices vary, it is crucial to have a clear view of the expenses involved.
Use the RenoIndex estimator now to get an estimate of prices in the canton of Schwyz. This step will allow you to plan your investment with peace of mind and effectively compare quotes received from specialized companies in the region.
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
No specific grant listed for this work. Maintenance tax deductions may still apply.
2832 Rebeuvelier · about 107.5 km
Eco6therm specializes in the installation of heating systems, particularly heat pumps, and solar photovoltaic energy solutions.
eco6therm.ch2735 Malleray · about 116.9 km
Company specialized in electrical installations and telecommunications systems, including network infrastructure and related trade.
telecrengglisa.ch3930 Visp · about 121.7 km
TZ Stromag offers comprehensive electrical engineering services for residential buildings, including installations, telematics services, and security.
stromag.ch3930 Visp · about 121.7 km
Steinlin und Partner AG is a Swiss company specializing in electrical installations, energy solutions such as photovoltaics, and IT services.
steinlin.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
Most modern solar batteries use lithium-ion technology. They generally offer a lifespan of between 10 and 15 years. Longevity depends heavily on the number of charge cycles and daily usage conditions.
It depends on your installation. Only systems equipped with a specific backup function can power your home during a grid failure. Check this option with your installer during the quotation phase.
Solar batteries require very little maintenance. However, it is recommended to check that the management software is working properly and to ensure that connections remain clean and well-ventilated according to the manufacturer's recommendations.
Yes, this is possible thanks to AC coupling systems. These solutions allow adding storage even to existing photovoltaic installations. Consult a professional to validate the technical feasibility for your current equipment.