J. Zornio S.A.
2826 Corban · about 109.4 km
Based in Corban, family-owned J. Zornio SA carries out masonry, reinforced concrete work, interior renovations, tiling and outdoor landscaping throughout the Jura.
zornio.chNew flooring · Wald (ZH)

At a glance
Small project
CHF 3'500 – CHF 8'700
Typical project
CHF 6'500 – CHF 15'300
Large project
CHF 11'000 – CHF 25'500
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 25 m² | CHF 3'500 | CHF 8'700 | CHF 200 |
| Typical project | 50 m² | CHF 6'500 | CHF 15'300 | CHF 200 |
| Large project | 88 m² | CHF 11'000 | CHF 25'500 | CHF 200 |
Computed with our estimator for Wald (ZH) (regional factor included), standard finish. Only the project size changes.
Included
Not included
In Wald (ZH), the federal building register lists 1'922 residential buildings and 4'957 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
69 % built before 1980
Construction year does not reveal past renovations: check the current insulation condition.
41 % · Heating oil
This distribution describes recorded buildings, not your system's consumption or efficiency.
For your renovation plans in Wald, RegBL data provides essential guidance. With 5 buildings out of 1922 officially heritage-protected, you should contact the municipality early to verify if your property is subject to specific preservation requirements. Furthermore, volume data is only partially available, as only 20 out of 1195 houses were measured according to the SIA 416 standard, showing a median volume of 624 m3. This figure is critical for scaling your heating system upgrades and calculating the scope of thermal insulation works required to improve your home's energy efficiency and comfort effectively.
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
The existing base, whether it is a bare screed, old tiles, or worn-out parquet, is often the biggest driver of renovation costs. The expenses are heavily linked to the preparations needed to ensure a perfectly level and stable surface.
If your current subfloor is uneven, a leveling compound will be necessary before laying the new covering. Do not neglect this phase, as the durability of your new floor depends directly on it.
Have your subfloor inspected by a professional before starting to avoid financial surprises.
If you live in a condominium apartment, complying with acoustic standards is essential. Most condominium regulations impose strict requirements regarding impact-sound insulation to limit the transmission of foot traffic noise to lower floors.
When selecting your new floor, you will likely need to integrate a high-performance acoustic underlay beneath the finish. This step ensures peaceful coexistence with your neighbors.
Thoroughly review the technical specifications required by your internal building regulations before ordering your materials to avoid any potential disputes.
Having underfloor heating significantly influences the choice of the ideal floor covering. To ensure optimal thermal performance, you should prioritize materials with low thermal resistance, allowing heat to radiate efficiently into your room.
Certain materials that are too thick or highly insulating can considerably reduce the efficiency of your heating system. It is recommended to check manufacturer technical specifications to confirm compatibility with underfloor heating.
Careful selection will allow you to maximize thermal comfort while saving energy over the long term.
Renovating a floor is a significant investment that requires precise calculation. Beyond the price per square meter of the chosen material, do not forget to include labor costs, removal of the old flooring, and potential installation of baseboards.
Every project is unique depending on the area, installation complexity, and condition of the subfloor. To obtain a realistic price range in CHF tailored to your situation, use our free RenoIndex tool.
It will allow you to prepare your budget and confidently compare quotes from local professionals.
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
No specific grant listed for this work. Maintenance tax deductions may still apply.
2826 Corban · about 109.4 km
Based in Corban, family-owned J. Zornio SA carries out masonry, reinforced concrete work, interior renovations, tiling and outdoor landscaping throughout the Jura.
zornio.ch2824 Vicques · about 113 km
Carpentry business in Vicques specializing in custom fittings, parquet flooring, windows, doors, and interior and exterior woodwork.
dom-menuiserie.ch2824 Vicques · about 113 km
Gyger Haustechnik specializes in sanitary installations, heating systems, bathroom renovations, and tiling work.
gyger-co.ch2824 Vicques · about 113 km
Menuiserie Voisard specializes in interior carpentry, cabinetmaking, parquet flooring, window installation, and the manufacturing of staircases.
menuiserievoisard.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
Coverings with low thermal resistance are best. Tiles, natural stone, or certain types of glued-down vinyl are excellent options as they conduct heat very well and optimize the efficiency of your heating system.
Leveling is only necessary if the subfloor has irregularities, cracks, or significant slopes. A perfectly level base is, however, crucial for installing thin coverings such as vinyl or linoleum.
For an accurate estimate, use the RenoIndex simulator. It considers the type of material and surface area to provide you with a price range in CHF adapted to local market realities.
Yes, condominium regulations often require sound insulation to minimize noise transmission. Check your internal regulations before choosing your materials to ensure compliance with the building's co-ownership rules.