Eco6therm Sàrl
2832 Rebeuvelier · about 89.3 km
Eco6therm specializes in the installation of heating systems, particularly heat pumps, and solar photovoltaic energy solutions.
eco6therm.chHome solar battery · Unterägeri
Installing a solar battery in Unterägeri
Are you planning to optimize your photovoltaic installation in Unterägeri? Adding a storage battery allows you to maximize self-consumption by using energy produced during the day after the sun goes down. This is a key step to gain energy independence and reduce your electricity bills. Before starting your project, it is essential to assess your specific needs. To get an accurate and free estimate of your project costs, use the online RenoIndex estimator right now to plan your investment effectively.
At a glance
- Typical budget
- CHF 7'000 – CHF 14'900
- Midpoint
- CHF 10'200
- Grants found
- 0
- Nearby companies
- 4
Worked examples in Unterägeri
Small project
CHF 3'800 – CHF 8'800
Typical project
CHF 7'000 – CHF 14'900
Large project
CHF 12'000 – CHF 24'700
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 5 kWh | CHF 3'800 | CHF 8'800 | CHF 1'200 |
| Typical project | 10 kWh | CHF 7'000 | CHF 14'900 | CHF 1'000 |
| Large project | 18 kWh | CHF 12'000 | CHF 24'700 | CHF 1'000 |
Computed with our estimator for Unterägeri (regional factor included), standard finish. Only the project size changes.
Cost split (typical project)
- Labour : CHF 2'000 (20 %)
- Materials : CHF 7'100 (70 %)
- Other costs : CHF 1'000 (10 %)
What the price covers
Included
- Supply and installation
- VAT
- Battery, charge management and standard connection; options according to answers
Not included
- Permits and architect fees
- Unexpected structural issues
- Possible subsidies
- Solar panels and complete electrical refurbishment
Unterägeri's housing stock in figures
In Unterägeri, the federal building register lists 1'449 residential buildings and 4'372 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
Age of residential buildings
54 % built before 1980
- Before 191914 %
- 1919–19454 %
- 1946–19607 %
- 1961–197013 %
- 1971–198016 %
- 1981–199011 %
- 1991–200013 %
- 2001–201010 %
- Since 201114 %
Construction year does not reveal past renovations: check the current insulation condition.
Main heating energy
45 % · Heating oil
- Heating oil45 %
- Heat pump27 %
- District heating11 %
- Wood11 %
- Electricity5 %
- Gas1 %
- Solar thermal1 %
This distribution describes recorded buildings, not your system's consumption or efficiency.
Heating and hot water: which energies?
| Energy | Heating | Hot water |
|---|---|---|
| Gas | 1 % | 0.9 % |
| Heating oil | 45 % | 44.2 % |
| District heating | 11 % | 12.6 % |
| Heat pump | 27 % | 9.9 % |
| Electricity | 5 % | 13 % |
| Wood | 11 % | 9.1 % |
| Solar thermal | 1 % | 8.7 % |
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
Type of heating system
- Boiler (unspecified)54.8 %
- Heat pump26.8 %
- Heat exchanger (district)10.7 %
- Central electric heating4 %
- Stove2.5 %
- Direct electric heaters0.5 %
A standard non-condensing boiler is usually older and less efficient.
Houses or apartment buildings?
- Single-family houses44.2 %
- Two-dwelling houses17.3 %
- Apartment buildings (3+)38.4 %
11.7 % of buildings mix housing with shops or offices.
The typical building
- storeys (median)
- 3
- median footprint
- 143 m²
- median dwelling area
- 100 m²
Renovations, heritage and volumes
For renovation projects in Unterägeri, the federal building register provides essential planning data. With 413 buildings classified as protected out of 471 known cases, early consultation with the municipality is critical to secure necessary permits. Regarding building scale, the median volume of 882 m3 across 641 houses helps estimate the scope of heating and insulation upgrades, though this figure covers only a partial sample. Please note that data coverage for these metrics is incomplete and no information regarding renovation years is available. Use these figures as a preliminary guide for assessing your property's specific requirements and renovation costs.
413
buildings flagged as protected
status known for 471 of 1'449 buildings; check with the municipality
882 m³
median house volume (SIA 416)
measured for 3 of 641 houses
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
Why install a solar battery?
A battery is worthwhile when solar output clearly exceeds your daytime use. By storing the surplus, you avoid feeding this electricity into the grid at low prices only to buy it back later at a higher cost.
This stabilizes your household against fluctuations in grid tariffs. Ensure you understand your daily load curve well.
A well-thought-out installation allows you to use your own clean electricity throughout the evening, significantly increasing the profitability of your existing solar panels. RenoIndex helps you anticipate these investments with a clear cost range.
Correct system sizing
The success of your project depends on sizing. It is crucial to size capacity by evening consumption, not panel power. Too much capacity unnecessarily increases your initial investment without significant efficiency gains.
Conversely, too little capacity will limit your savings during periods of high production. Analyze your annual bills to identify your nightly consumption peak and adjust the battery capacity accordingly.
Check RenoIndex to compare budgets adapted to different storage capacities and find the balance that best suits your household needs.
Technical compatibility and installation
Before buying, check compatibility with your existing inverter. Some inverters are designed to work specifically with certain battery brands.
If your current system does not support adding a battery, a hybrid inverter might be necessary, which would change your overall budget. Hire certified professionals to ensure a secure installation compliant with the standards in force in the Canton of Zug.
A proper technical setup ensures the longevity of your equipment. RenoIndex offers an overview of prices to help you plan your investment with peace of mind.
Legal framework and procedures
For any solar installation, find out about local and cantonal requirements. In the Canton of Zug, ensure you comply with fire safety guidelines and potential building permits.
Although there are no specific municipal rules, the installation must always meet Swiss technical standards. Ensure your project is declared to benefit from legal security. Rigorous planning helps avoid administrative delays.
To get a quantified estimate of your installation, including commissioning costs, you can use the RenoIndex simulator for free at any time.
Your project in 5 steps
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
Grants and subsidies
No specific grant listed for this work. Maintenance tax deductions may still apply.
Companies in the area
TELEC Renggli S.A. (Télécommunications, Electricité et Commerce)
2735 Malleray · about 97.9 km
Company specialized in electrical installations and telecommunications systems, including network infrastructure and related trade.
telecrengglisa.chSolar conseil Sàrl
2605 Sonceboz-Sombeval · about 105.2 km
Solar conseil Sàrl specializes in the installation of photovoltaic power plants, energy storage solutions, and energy efficiency consulting in the Jura and Bernese Jura regions.
solarconseil.chTZ Stromag, Filiale Raron
3942 Raron · about 107.1 km
TZ Stromag is a full-service provider of electrical engineering for buildings, covering installations, automation, security, and in-house switchgear construction.
stromag.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
Frequently asked questions
Is it profitable to add a battery in Unterägeri?
Profitability depends on your self-consumption. If you use a lot of electricity in the evening, the battery reduces your dependence on the grid, which is highly advantageous. Calculate your return on investment using RenoIndex.
What capacity should I choose for my house?
Prioritize capacity that covers your nightly needs rather than the total power of your panels. A simple rule is to analyze your evening consumption peaks. Consult RenoIndex for a cost estimate.
Does the installation require a permit?
In the Canton of Zug, check the applicable technical standards. Most indoor batteries do not require a heavy permit, but compliance with safety rules is mandatory for all installations.
How to estimate the total project price?
The price varies according to technology and capacity. Use the free RenoIndex calculator to get a price range adapted to your specific needs and plan your budget with peace of mind.
Works often combined in Unterägeri
Solar panels cost in UnterägeriHeat pump installation cost in UnterägeriSolar water heating cost in Unterägeri
Other works in Unterägeri
Kitchen renovationBathroom renovationNew flooringInterior paintingWindow replacementRoof renovationFacade insulationHeat pump installationSolar panelsSolar water heatingTerrace constructionFence installationStairwell renovationElevator installation or upgrade