Heat pump installation · Rothrist
At a glance
Small project
CHF 31'500 – CHF 57'500
Typical project
CHF 39'700 – CHF 74'000
Large project
CHF 52'100 – CHF 98'600
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 80 m² | CHF 31'500 | CHF 57'500 | CHF 500 |
| Typical project | 160 m² | CHF 39'700 | CHF 74'000 | CHF 300 |
| Large project | 280 m² | CHF 52'100 | CHF 98'600 | CHF 300 |
Computed with our estimator for Rothrist (regional factor included), standard finish. Only the project size changes.
Included
Not included
In Rothrist, the federal building register lists 2'117 residential buildings and 4'351 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
54 % built before 1980
Construction year does not reveal past renovations: check the current insulation condition.
44 % · Heating oil
This distribution describes recorded buildings, not your system's consumption or efficiency.
| Energy | Heating | Hot water |
|---|---|---|
| Gas | 2 % | 2.2 % |
| Heating oil | 44 % | 36.3 % |
| Heat pump | 43 % | 7.3 % |
| Electricity | 6 % | 49.2 % |
| Wood | 6 % | 2.5 % |
| Solar thermal | 0 % | 1.7 % |
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
A standard non-condensing boiler is usually older and less efficient.
For renovation planning in Rothrist, official building registry figures indicate that 645 buildings are subject to heritage protection. Homeowners should contact municipal authorities early to navigate permit requirements for such properties. Regarding building volume, the registry covers 1556 houses using the SIA 416 standard; however, the data coverage is partial as no median volume is available. Consequently, owners must rely on individual assessments to accurately determine the scale of necessary heating or insulation improvements, as the provided registry statistics cannot currently offer a reliable average figure for your specific renovation project.
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
Before taking any technical steps, first check whether your area can connect to a priority district heating network. In some areas, authorities prioritize connecting to a collective network rather than individual installation.
This initial analysis helps you avoid unnecessary investments and comply with regional energy guidelines. Once this verification is complete, you can confidently move towards choosing a technology adapted to your home.
RenoIndex supports you in this reflection phase by providing the necessary price benchmarks to compare the technical solutions available to you.
The capacity of your future heat pump must be precisely adapted to your building's requirements.
A crucial element is the local design outdoor temperature, as it determines the thermal capacity needed to maintain optimal comfort during the coldest periods of the year.
Correct sizing ensures not only maximum efficiency but also extends the lifespan of your equipment. Do not hesitate to consult an expert to validate these technical parameters.
To get a clear idea of the budget required, the RenoIndex simulator provides a precise price range adapted to your project's specificities.
Installing a heat pump requires special attention regarding noise. Outdoor air-water heat pumps must meet noise limits towards neighbours to ensure good coexistence.
Choosing the location is therefore strategic : avoid placing the unit too close to your neighbours' windows or outdoor living areas. Many modern models are designed to be particularly quiet, but rigorous planning remains essential.
Use RenoIndex to estimate installation costs, including the necessary soundproofing measures to comply with the rules in force in the canton of Aargau.
Carrying out a heating project is a significant investment for any owner. In addition to the purchase price, plan for installation, connection, and any necessary thermal renovation work to improve the heat pump's efficiency.
Although subsidies can vary, it is advisable to check regularly with the canton. To avoid financial surprises, start by drawing up a detailed budget.
RenoIndex is the ideal tool to obtain a free and realistic estimate in CHF, allowing you to easily compare the costs of your future heat pump and successfully carry out your renovation work.
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
No specific grant listed for this work. Maintenance tax deductions may still apply.
2829 Vermes · about 30.1 km
The website presented under the name Imeri Chauffage et Sanitaire Sàrl offers plumbing, heating and solar thermal work, while F. Imeri Sàrl’s registered purpose refers to a scrap metal business.
imeri-sarl.ch2824 Vicques · about 34.9 km
Specialist since 1968 in sanitary installations, heating (gas, oil, wood, renewable energy), and tinsmithing with 24/7 emergency repair service.
sanit.ch2824 Vicques · about 34.9 km
Buchwalder Sàrl in Vicques has specialized in the installation, repair, and renovation of heating and sanitary systems since 1966.
buchwalder-sarl.ch2824 Vicques · about 34.9 km
Gyger Haustechnik specializes in sanitary installations, heating systems, bathroom renovations, and tiling work.
gyger-co.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
The need for a permit depends on the nature and location of the installation. It is strongly recommended to consult your municipality's technical department or check the current cantonal guidelines before ordering your equipment to ensure your project complies with all regulations.
Prices vary depending on the chosen technology and the complexity of the installation. For a reliable estimate tailored to your house and specific needs, use the free RenoIndex calculator to get a price range in CHF for your local project.
Generally, the installation of a heat pump takes a few days once the preparations are complete. However, the duration depends on the extent of the necessary prior work, such as removing the old heating system or adapting the heat distribution circuits.
Financial support for heat pumps changes regularly. We advise you to consult the official portal of the canton of Aargau or the Building Program to find out about current grants and eligibility criteria applicable before starting your heating work.
