Local housing stock
In Rolle, the federal building register lists 686 residential buildings and 2'877 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
Age of residential buildings
65 % built before 1980
- Before 191928 %
- 1919–194513 %
- 1946–196011 %
- 1961–19707 %
- 1971–19806 %
- 1981–19906 %
- 1991–20006 %
- 2001–201017 %
- Since 20116 %
Construction year does not reveal past renovations: check the current insulation condition.
Main heating energy
60 % · Gas
- Gas60 %
- Heating oil22 %
- Heat pump12 %
- Electricity5 %
- Wood1 %
This distribution describes recorded buildings, not your system's consumption or efficiency.
Heating and hot water: which energies?
| Energy | Heating | Hot water |
|---|---|---|
| Gas | 60 % | 57.4 % |
| Heating oil | 22 % | 22.7 % |
| Heat pump | 12 % | 6.5 % |
| Electricity | 5 % | 8.3 % |
| Wood | 1 % | 0.8 % |
| Solar thermal | 0 % | 3.9 % |
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
Type of heating system
- Boiler (unspecified)66.3 %
- Heat pump12.5 %
- Condensing boiler11.7 %
- Standard boiler4.1 %
- Central electric heating3.7 %
- Direct electric heaters0.7 %
- Stove0.6 %
A standard non-condensing boiler is usually older and less efficient.
Houses or apartment buildings?
- Single-family houses46.4 %
- Two-dwelling houses13.3 %
- Apartment buildings (3+)40.4 %
20.7 % of buildings mix housing with shops or offices.
The typical building
- storeys (median)
- 3
- median footprint
- 143 m²
- median dwelling area
- 90 m²
Dwellings by number of rooms
Dwellings per building
- 1 dwelling46.3 %
- 2 to 428.2 %
- 5 to 916.2 %
- 10 to 196.3 %
- 20 or more3.1 %
Renovations, heritage and volumes
When planning renovations in Rolle, note that official building register data is partially covered. With 24 out of 686 buildings officially listed under heritage protection, contacting the municipality early to discuss permits is essential. Regarding the scale of your insulation or heating projects, the median house volume of 944 m3, based on 74 houses measured via SIA 416 standards, provides a useful reference point. As volume data coverage is limited for many structures, it is advisable to consider your property's specific dimensions to ensure your renovation cost estimate remains accurate and well-aligned with local regulatory requirements.
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
Renovating in Rolle: what to know
Planning works in Rolle, canton of Vaud? Before requesting quotes, local context helps: climate drives the value of insulation and heating, cantonal rules govern boiler replacement, and tax deductions can noticeably reduce the bill.
Rules of the canton of Vaud
These rules apply across the whole canton, not only in Rolle.
Choose your works in Rolle
- Kitchen renovation cost in Rolle
- Bathroom renovation cost in Rolle
- New flooring cost in Rolle
- Interior painting cost in Rolle
- Window replacement cost in Rolle
- Roof renovation cost in Rolle
- Facade insulation cost in Rolle
- Heat pump installation cost in Rolle
- Solar panels cost in Rolle
- Home solar battery cost in Rolle
- Solar water heating cost in Rolle
- Terrace construction cost in Rolle
- Fence installation cost in Rolle
- Stairwell renovation cost in Rolle
- Elevator installation or upgrade cost in Rolle
Nearby municipalities : Lausanne · Yverdon-les-Bains · Vevey · Nyon · Montreux · Morges · Renens · Pully