Solar water heating · Reiden
At a glance
Small project
CHF 8'900 – CHF 20'800
Typical project
CHF 11'500 – CHF 26'600
Large project
CHF 15'700 – CHF 36'200
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 3 m² | CHF 8'900 | CHF 20'800 | CHF 4'800 |
| Typical project | 6 m² | CHF 11'500 | CHF 26'600 | CHF 3'100 |
| Large project | 11 m² | CHF 15'700 | CHF 36'200 | CHF 2'300 |
Computed with our estimator for Reiden (regional factor included), standard finish. Only the project size changes.
Included
Not included
In Reiden, the federal building register lists 1'395 residential buildings and 3'574 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
50 % built before 1980
Construction year does not reveal past renovations: check the current insulation condition.
38 % · Heating oil
This distribution describes recorded buildings, not your system's consumption or efficiency.
| Energy | Heating | Hot water |
|---|---|---|
| Gas | 4 % | 3.1 % |
| Heating oil | 38 % | 27 % |
| District heating | 4 % | 3.2 % |
| Heat pump | 38 % | 19.7 % |
| Electricity | 3 % | 31.5 % |
| Wood | 13 % | 8.6 % |
| Solar thermal | 0 % | 1.2 % |
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
A standard non-condensing boiler is usually older and less efficient.
14.4 % of buildings mix housing with shops or offices.
For homeowners planning renovations in Reiden, consulting RegBL figures is essential for accurate budgeting. With 356 buildings under heritage protection, it is vital to contact local authorities early to discuss permit requirements. Regarding building scale, data for 867 houses indicates a median volume of 552 m3 based on the SIA 416 standard, providing a basis for estimating heating or insulation costs. Please be aware that data coverage is partial, as 842 properties do not utilize this specific measurement standard. Understanding these site-specific metrics helps ensure your renovation project remains compliant and financially well-planned within the municipality.
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
Solar thermal collectors capture energy from solar radiation to heat a heat transfer fluid. This fluid then transfers the heat to a storage tank, ensuring hot water is available daily. These systems are particularly effective during sunny months.
In fact, solar thermal collectors usually cover much of summer hot water, thus significantly reducing the load on your main boiler.
This is an excellent way to add value to your property while adopting a sustainable approach to your domestic energy consumption and benefiting from clean, free energy.
To maximize performance, many homeowners choose to pair solar thermal with a heat pump. However, such an installation is not automatic. Combining collectors with a heat pump needs a sizing study performed by a professional.
This analysis ensures perfect compatibility between thermal production and the existing central heating system.
A well-thought-out design avoids overcapacity and guarantees optimal long-term profitability, while ensuring intelligent management of your indoor thermal comfort throughout the year.
Professional planning is therefore essential for the success of your project.
It is advisable to check the current programs in the canton of Lucerne before starting work. These grants are designed to encourage homeowners to invest in sustainable solutions.
In addition to subsidies, consider optimizing your project to benefit from potential tax deductions. RenoIndex helps you better understand your projected budget for these specific works.
Before getting started, ensure you consult local companies specializing in solar thermal energy. Your roof's orientation and the tilt of the collectors are determining factors for annual yield.
In Reiden, the quality of sunlight must be evaluated to properly size the necessary surface area of panels. Do not hesitate to request multiple quotes to compare offers.
Finally, keep in mind that regular maintenance of the hydraulic circuit is crucial for the longevity of your installation. Consult the RenoIndex estimator now to get a realistic price range based on your configuration.
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
No specific grant listed for this work. Maintenance tax deductions may still apply.
2829 Vermes · about 38.3 km
The website presented under the name Imeri Chauffage et Sanitaire Sàrl offers plumbing, heating and solar thermal work, while F. Imeri Sàrl’s registered purpose refers to a scrap metal business.
imeri-sarl.ch2832 Rebeuvelier · about 43.2 km
Eco6therm specializes in the installation of heating systems, particularly heat pumps, and solar photovoltaic energy solutions.
eco6therm.ch2824 Vicques · about 43.4 km
Specialist since 1968 in sanitary installations, heating (gas, oil, wood, renewable energy), and tinsmithing with 24/7 emergency repair service.
sanit.ch2824 Vicques · about 43.4 km
Buchwalder Sàrl in Vicques has specialized in the installation, repair, and renovation of heating and sanitary systems since 1966.
buchwalder-sarl.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
Urban planning rules may vary. Generally, integrated solar installations only require a simple notification, but it is best to contact the urban planning department of your municipality in Reiden to confirm local requirements before starting work.
A well-maintained solar thermal installation typically has a lifespan of between 20 and 25 years. Regular maintenance of the heat transfer fluid and mechanical components helps ensure the system's good performance throughout this period.
Yes, thermal collectors work even in cold weather, provided there is solar radiation. However, efficiency is reduced compared to summer. They then serve as preheating for your water, supplemented by your usual heating system.
Yes, the produced heat is stored as hot water in an insulated storage tank. This allows energy produced during the day to be kept for later use, for example for your morning or evening shower.
