J. Zornio S.A.
2826 Corban · about 101.9 km
Based in Corban, family-owned J. Zornio SA carries out masonry, reinforced concrete work, interior renovations, tiling and outdoor landscaping throughout the Jura.
zornio.chNew flooring · Rapperswil-Jona

At a glance
Small project
CHF 3'500 – CHF 8'700
Typical project
CHF 6'500 – CHF 15'300
Large project
CHF 11'000 – CHF 25'500
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 25 m² | CHF 3'500 | CHF 8'700 | CHF 200 |
| Typical project | 50 m² | CHF 6'500 | CHF 15'300 | CHF 200 |
| Large project | 88 m² | CHF 11'000 | CHF 25'500 | CHF 200 |
Computed with our estimator for Rapperswil-Jona (regional factor included), standard finish. Only the project size changes.
Included
Not included
In Rapperswil-Jona, the federal building register lists 3'786 residential buildings and 14'034 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
53 % built before 1980
Construction year does not reveal past renovations: check the current insulation condition.
42 % · Heat pump
This distribution describes recorded buildings, not your system's consumption or efficiency.
For homeowners planning renovations in Rapperswil-Jona, official RegBL figures provide essential planning guidance. Regarding heritage protection, 78 buildings are identified as protected out of 403 known cases, making early coordination with municipal authorities regarding permits vital. The median building volume of 590 cubic meters, based on the SIA 416 standard, helps estimate the scale required for heating or insulation upgrades. Please note that data coverage is partial; only 3 buildings are measured under the SIA 416 standard, and there is no recorded information regarding renovation years for the 3786 total buildings registered in the municipality.
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
The success of any flooring installation depends largely on the quality of the base. The existing base, whether it is a raw screed, old tiles, or worn parquet, often drives the cost more than the covering itself.
If your surface has cracks or irregularities, leveling will be essential to ensure a perfect finish. By anticipating this preparatory work, you avoid surprises on the construction site.
Consult local professionals to assess the condition of your floors and get an accurate diagnosis before ordering your materials.
It is essential to learn about these requirements before making a final choice. Improperly insulated flooring can lead to neighborhood disputes and high correction costs.
Prioritize certified underlays that meet current Swiss standards for total peace of mind in your home.
Underfloor heating is common in Rapperswil-Jona homes and directly influences your choice of materials. With underfloor heating, it is imperative to select a compatible covering that offers low thermal resistance.
A material that is too insulating will prevent heat from diffusing efficiently, increasing your energy consumption. Tiles, natural stone, or certain types of vinyl are excellent conductive options.
Always check product datasheets to confirm they are approved for use with heating systems and use RenoIndex to budget these options transparently.
Budget planning is the key step to successfully completing your work without stress. Beyond the cost per square meter of the chosen covering, do not forget to include the removal and disposal of the old floor, as well as the cost of specialized labor.
The complexity of the installation (patterns, room dimensions, obstacles) also plays a decisive role in the final bill. Use the RenoIndex simulator to get a realistic estimate based on local market prices.
This will allow you to adjust your ambitions according to your available financial resources for this renovation project.
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
No specific grant listed for this work. Maintenance tax deductions may still apply.
2826 Corban · about 101.9 km
Based in Corban, family-owned J. Zornio SA carries out masonry, reinforced concrete work, interior renovations, tiling and outdoor landscaping throughout the Jura.
zornio.ch2824 Vicques · about 105.4 km
Carpentry business in Vicques specializing in custom fittings, parquet flooring, windows, doors, and interior and exterior woodwork.
dom-menuiserie.ch2824 Vicques · about 105.4 km
Gyger Haustechnik specializes in sanitary installations, heating systems, bathroom renovations, and tiling work.
gyger-co.ch2824 Vicques · about 105.4 km
Menuiserie Voisard specializes in interior carpentry, cabinetmaking, parquet flooring, window installation, and the manufacturing of staircases.
menuiserievoisard.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
You can use the RenoIndex estimator for free. It allows you to quickly obtain a price range for changing your floors, adapted to local market conditions, without waiting for multiple quotes from different companies.
Generally, changing the flooring in an apartment or house does not require a building permit unless you structurally modify the screed or floor level. When in doubt, always check the rules of your condominium association.
Tiles, natural stone, and certain vinyls are the most recommended materials as they offer excellent thermal conductivity. They allow for rapid heat transmission and are particularly efficient when used with an underfloor heating system.
Yes, it is common for condominium regulations to impose strict impact-sound insulation standards to avoid noise pollution. It is therefore essential to check these clauses before any purchase to choose a covering that complies with the building's technical requirements.