Hallenbarter & Russi Gebäudetechnik AG
3988 Obergoms · about 129.5 km
Obergoms-based company specializing in sanitary installations, heating systems, roofing, and tinsmith work for new builds and renovations.
hallenbarter-russi.chHeat pump installation · Oberriet (SG)

At a glance
Small project
CHF 29'400 – CHF 53'700
Typical project
CHF 37'100 – CHF 69'100
Large project
CHF 48'600 – CHF 92'100
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 80 m² | CHF 29'400 | CHF 53'700 | CHF 500 |
| Typical project | 160 m² | CHF 37'100 | CHF 69'100 | CHF 300 |
| Large project | 280 m² | CHF 48'600 | CHF 92'100 | CHF 200 |
Computed with our estimator for Oberriet (SG) (regional factor included), standard finish. Only the project size changes.
Included
Not included
In Oberriet (SG), the federal building register lists 2'722 residential buildings and 4'152 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
46 % built before 1980
Construction year does not reveal past renovations: check the current insulation condition.
38 % · Heat pump
This distribution describes recorded buildings, not your system's consumption or efficiency.
| Energy | Heating | Hot water |
|---|---|---|
| Gas | 15 % | 9.6 % |
| Heating oil | 36 % | 25.1 % |
| Heat pump | 38 % | 36.6 % |
| Electricity | 0 % | 18.6 % |
| Wood | 10 % | 3.8 % |
| Solar thermal | 0 % | 5.9 % |
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
A standard non-condensing boiler is usually older and less efficient.
For homeowners planning renovations in Oberriet, official building register data offers essential guidance. With 28 buildings under heritage protection out of 328 known properties, consulting the municipality early is vital for permit acquisition. Regarding scale, the median volume for the 11 buildings measured by the SIA 416 standard is 951 m3, helping to estimate costs for heating and insulation upgrades. Please note that data coverage is partial for these metrics. We recommend verifying specific building details directly with local authorities to ensure your renovation plans align with municipal regulations and the current structural profile of your property.
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
First, check whether your area can connect to a priority district heating network. If not, a heat pump is a highly efficient alternative. Evaluating your building's insulation is crucial to properly size the equipment.
Keep in mind that the local design outdoor temperature determines the required capacity of your heat pump to guarantee year-round comfort. A thorough thermal study beforehand prevents extra costs resulting from oversized or undersized systems.
Use the RenoIndex estimator to plan your budget effectively right from the start.
In Switzerland, compliance with noise regulations is mandatory for legal operation.
When planning with your installer, ensure that the chosen model is certified for low noise emissions and is well-suited to your plot configuration to maintain good relations with your neighbours.
While municipal rules may vary, compliance with federal and cantonal standards is always the priority. Technical documentation must be submitted accurately to prove conformity with energy requirements.
A well-prepared file significantly speeds up the approval of your application. Do not hesitate to seek advice from local experts who are familiar with regional administrative details.
Investing in a heat pump involves initial costs, but the energy savings achieved over the years are significant. To get a clear idea of the required budget, use the RenoIndex calculator.
While we do not list specific grants here, it is strongly advised to check the cantonal incentive programs of SG before signing a quote. Sometimes, different aid schemes can be combined depending on the type of renovation.
Planning your budget while considering future heating bill savings helps you assess the long-term profitability of your investment.
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
No specific grant listed for this work. Maintenance tax deductions may still apply.
3988 Obergoms · about 129.5 km
Obergoms-based company specializing in sanitary installations, heating systems, roofing, and tinsmith work for new builds and renovations.
hallenbarter-russi.ch2829 Vermes · about 155 km
The website presented under the name Imeri Chauffage et Sanitaire Sàrl offers plumbing, heating and solar thermal work, while F. Imeri Sàrl’s registered purpose refers to a scrap metal business.
imeri-sarl.ch2824 Vicques · about 159.4 km
Specialist since 1968 in sanitary installations, heating (gas, oil, wood, renewable energy), and tinsmithing with 24/7 emergency repair service.
sanit.ch2824 Vicques · about 159.4 km
Buchwalder Sàrl in Vicques has specialized in the installation, repair, and renovation of heating and sanitary systems since 1966.
buchwalder-sarl.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
A well-insulated house is ideal for a heat pump. A professional energy audit helps evaluate your heating needs and the compatibility of your existing heat distribution systems, such as radiators or underfloor heating, to ensure optimal performance.
It depends on your location. Always check with your municipality to see if a priority network exists. District heating is often a highly efficient and ecological solution if the infrastructure is available in your neighborhood.
On average, installing a heat pump takes between three and five working days when replacing an existing system. This time can vary depending on the complexity of the hydraulic and electrical connections required on-site.
Use the free RenoIndex estimator. It provides you with a realistic price range for your heating project, adapted to the Swiss context and the nature of your energy renovation.