Heat pump installation · Oberentfelden
At a glance
Small project
CHF 30'000 – CHF 54'800
Typical project
CHF 37'800 – CHF 70'500
Large project
CHF 49'600 – CHF 93'900
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 80 m² | CHF 30'000 | CHF 54'800 | CHF 500 |
| Typical project | 160 m² | CHF 37'800 | CHF 70'500 | CHF 300 |
| Large project | 280 m² | CHF 49'600 | CHF 93'900 | CHF 300 |
Computed with our estimator for Oberentfelden (regional factor included), standard finish. Only the project size changes.
Included
Not included
In Oberentfelden, the federal building register lists 1'505 residential buildings and 4'048 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
58 % built before 1980
Construction year does not reveal past renovations: check the current insulation condition.
39 % · Heating oil
This distribution describes recorded buildings, not your system's consumption or efficiency.
| Energy | Heating | Hot water |
|---|---|---|
| Gas | 27 % | 15.8 % |
| Heating oil | 39 % | 26.4 % |
| District heating | 2 % | 0.1 % |
| Heat pump | 23 % | 9.9 % |
| Electricity | 7 % | 43 % |
| Wood | 2 % | 3.5 % |
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
A standard non-condensing boiler is usually older and less efficient.
For homeowners planning renovations in Oberentfelden, official building register data provides critical insights. There are 386 protected heritage buildings, making it essential to contact the municipality early regarding permits. Regarding building size, the median volume is 1001 m3 based on the SIA 416 standard. Please note that data coverage for volume is partial, as measurements are recorded for only 11 out of 1099 houses. Understanding these figures helps in scaling your future insulation and heating improvements effectively, ensuring you navigate local requirements and infrastructure specifics correctly while planning your upcoming building renovation projects within this municipality.
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
Before starting, you must verify the configuration of your residential area. The first step is to confirm whether your district is connected to a priority district heating network, which could influence your energy choices.
Additionally, the local design outdoor temperature in Oberentfelden plays a crucial role in calculating the capacity required for your heat pump.
A thermal analysis by a professional ensures that your equipment is sized optimally to handle regional winters without excessive consumption. Proper planning prevents future inefficiencies and ensures long-term comfort for your entire household.
Installing an air-water heat pump requires special attention regarding noise levels. As these systems use outdoor fans, it is essential to respect noise limits toward your neighbours.
Strategic placement of the outdoor unit, away from bedroom windows and ideally shielded by garden elements, helps minimize noise disturbances.
We recommend consulting an acoustic specialist or a qualified installer to choose a quiet model and orient it in a way that limits sound propagation while ensuring efficient air circulation for the unit's performance.
The choice of heat pump model depends on your building's configuration and your current heat distribution system, such as underfloor heating or radiators.
It is essential to choose a heat pump that works efficiently with your existing emitters to maximize savings. In the canton of Aargau, compliance with energy standards is encouraged.
By using the RenoIndex simulator, you can compare different solutions and get a clear price range for your project in Oberentfelden, ensuring a sustainable and cost-effective investment for your home.
Executing a heat pump project in Oberentfelden requires precise coordination between different trades, particularly the heating installer and the electrician. Once the concept is validated and the sizing is complete, work can commence.
It is important to have a clear schedule to minimize heating interruptions during the transition. Make sure to obtain all necessary detailed quotes before starting.
RenoIndex supports you during this planning phase by providing the reliable cost estimates essential for structuring your renovation budget effectively.
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
No specific grant listed for this work. Maintenance tax deductions may still apply.
2829 Vermes · about 42.1 km
The website presented under the name Imeri Chauffage et Sanitaire Sàrl offers plumbing, heating and solar thermal work, while F. Imeri Sàrl’s registered purpose refers to a scrap metal business.
imeri-sarl.ch2824 Vicques · about 46.3 km
Specialist since 1968 in sanitary installations, heating (gas, oil, wood, renewable energy), and tinsmithing with 24/7 emergency repair service.
sanit.ch2824 Vicques · about 46.3 km
Buchwalder Sàrl in Vicques has specialized in the installation, repair, and renovation of heating and sanitary systems since 1966.
buchwalder-sarl.ch2824 Vicques · about 46.3 km
Gyger Haustechnik specializes in sanitary installations, heating systems, bathroom renovations, and tiling work.
gyger-co.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
Use the free RenoIndex simulator to get a quick estimate of the price range in Swiss Francs tailored to your local situation in Oberentfelden.
Always check whether your plot is located in a priority district heating zone before planning an individual heat pump installation.
Yes, air-water heat pumps must meet strict noise limits towards neighbours, which requires careful planning of the unit's location.
The capacity is calculated based on the local design outdoor temperature and the specific thermal needs of your building.
