Solar water heating · Ingenbohl
At a glance
Small project
CHF 8'900 – CHF 20'800
Typical project
CHF 11'500 – CHF 26'600
Large project
CHF 15'700 – CHF 36'200
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 3 m² | CHF 8'900 | CHF 20'800 | CHF 4'800 |
| Typical project | 6 m² | CHF 11'500 | CHF 26'600 | CHF 3'100 |
| Large project | 11 m² | CHF 15'700 | CHF 36'200 | CHF 2'300 |
Computed with our estimator for Ingenbohl (regional factor included), standard finish. Only the project size changes.
Included
Not included
In Ingenbohl, the federal building register lists 1'221 residential buildings and 4'622 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
50 % built before 1980
Construction year does not reveal past renovations: check the current insulation condition.
31 % · District heating
This distribution describes recorded buildings, not your system's consumption or efficiency.
| Energy | Heating | Hot water |
|---|---|---|
| Gas | 5 % | 4.8 % |
| Heating oil | 29 % | 26.3 % |
| District heating | 31 % | 18.4 % |
| Heat pump | 20 % | 3.8 % |
| Electricity | 7 % | 40.6 % |
| Wood | 8 % | 2.8 % |
| Solar thermal | 0 % | 3.2 % |
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
A standard non-condensing boiler is usually older and less efficient.
13.7 % of buildings mix housing with shops or offices.
For your renovation projects in Ingenbohl, the RegBL figures provide essential insights. Regarding heritage, two buildings are officially protected, making it vital to contact the municipality early for permits, though data coverage remains partial with 989 buildings unknown. For building volume, the median value for the 15 houses measured under the SIA 416 standard is 925 m3, serving as a key indicator for scaling your heating and insulation works. Please note that volume data is limited, as 531 buildings do not utilize this specific standard, meaning these figures represent only a small portion of the local housing stock.
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
Solar thermal collectors usually cover much of summer hot water, reducing the load on your main boiler. By adopting this solution in Ingenbohl, you benefit from free, inexhaustible energy.
Beyond direct savings on your energy bills, solar heating improves your building's energy rating. To plan your project well, be sure to use the RenoIndex to get a reliable price range.
A properly sized installation is essential to maximize your yield throughout the year, even during sunny days in transitional seasons.
Combining collectors with a heat pump needs a sizing study. The goal is to ensure optimal synergy between the two energy sources. In winter, the heat pump takes over, while in summer, the collectors provide most of the hot water production.
This hybrid approach is common in the canton of Schwyz to guarantee constant comfort. Use the RenoIndex estimator to anticipate the total costs of this combined installation.
An expert can advise you on the technical integration to avoid conflicts between the different components of your heating system.
Although specific conditions depend on the regulations in force in the canton of Schwyz, it is recommended to always check support programs before starting work. Financial aid can significantly reduce the initial investment.
To get a clear view of your project, use the RenoIndex to evaluate likely costs. Remember that any grant application must generally be submitted before work begins to be eligible for public funding.
When planning your solar thermal installation in Ingenbohl, pay close attention to the orientation and tilt of the panels. A south-facing exposure is ideal to capture maximum radiation.
Also ensure that the roof is in good condition before installation, as replacing tiles after is expensive. If you have doubts about the necessary budget, the RenoIndex simulator is the perfect tool to get a suitable price range.
A well-prepared project prevents technical and financial surprises, ensuring long-lasting performance for your home.
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
No specific grant listed for this work. Maintenance tax deductions may still apply.
2829 Vermes · about 91.1 km
The website presented under the name Imeri Chauffage et Sanitaire Sàrl offers plumbing, heating and solar thermal work, while F. Imeri Sàrl’s registered purpose refers to a scrap metal business.
imeri-sarl.ch2832 Rebeuvelier · about 95.8 km
Eco6therm specializes in the installation of heating systems, particularly heat pumps, and solar photovoltaic energy solutions.
eco6therm.ch2824 Vicques · about 96.6 km
Specialist since 1968 in sanitary installations, heating (gas, oil, wood, renewable energy), and tinsmithing with 24/7 emergency repair service.
sanit.ch2824 Vicques · about 96.6 km
Buchwalder Sàrl in Vicques has specialized in the installation, repair, and renovation of heating and sanitary systems since 1966.
buchwalder-sarl.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
Yes, but its efficiency decreases in winter due to less sunshine. It then serves as a supplement to the main heating system to preheat the water.
The surface area depends on the number of residents and usage. Generally, 1 to 2 m² per person is sufficient to cover domestic hot water needs.
It is advisable to check municipal requirements. Although solar installations are often simplified, local rules regarding landscape protection may apply.
The cost varies depending on complexity and size. For a precise estimate, we recommend using our free RenoIndex tool to get a suitable price range.
