Hallenbarter & Russi Gebäudetechnik AG
3988 Obergoms · about 56.3 km
Obergoms-based company specializing in sanitary installations, heating systems, roofing, and tinsmith work for new builds and renovations.
hallenbarter-russi.chHeat pump installation · Horw
Heat pump installation in Horw: Complete guide
Are you planning to install a heat pump in Horw to optimize your energy consumption? This ecological transition is a great decision to increase your property value and reduce heating bills. While the process may seem complex, careful preparation makes the shift to renewable energy easier. In this guide, we cover the technical aspects and essential steps for your project. To get a precise cost estimate adapted to your home, please use the free RenoIndex estimator today for a clear CHF range.
At a glance
- Typical budget
- CHF 36'700 – CHF 68'300
- Midpoint
- CHF 51'300
- Grants found
- 0
- Nearby companies
- 4
Worked examples in Horw
Small project
CHF 29'100 – CHF 53'200
Typical project
CHF 36'700 – CHF 68'300
Large project
CHF 48'100 – CHF 91'100
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 80 m² | CHF 29'100 | CHF 53'200 | CHF 500 |
| Typical project | 160 m² | CHF 36'700 | CHF 68'300 | CHF 300 |
| Large project | 280 m² | CHF 48'100 | CHF 91'100 | CHF 200 |
Computed with our estimator for Horw (regional factor included), standard finish. Only the project size changes.
Cost split (typical project)
- Labour : CHF 20'500 (40 %)
- Materials : CHF 25'700 (50 %)
- Other costs : CHF 5'100 (10 %)
What the price covers
Included
- Supply and installation
- VAT
- Heat pump and standard connections; removal and equipment only according to answers
Not included
- Permits and architect fees
- Unexpected structural issues
- Possible subsidies
- Drilling beyond 150 m, buried or contaminated tank, asbestos, insulation and new finishes
- With air-to-air: hot water and ducts only if selected; adaptations beyond the options excluded
Horw's housing stock in figures
In Horw, the federal building register lists 2'080 residential buildings and 7'940 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
Age of residential buildings
55 % built before 1980
- Before 19195 %
- 1919–19459 %
- 1946–196013 %
- 1961–197012 %
- 1971–198016 %
- 1981–199012 %
- 1991–200013 %
- 2001–201010 %
- Since 201110 %
Construction year does not reveal past renovations: check the current insulation condition.
Main heating energy
42 % · Heat pump
- Heat pump42 %
- Heating oil34 %
- Gas9 %
- Wood9 %
- Electricity3 %
- District heating2 %
This distribution describes recorded buildings, not your system's consumption or efficiency.
Heating and hot water: which energies?
| Energy | Heating | Hot water |
|---|---|---|
| Gas | 9 % | 8.2 % |
| Heating oil | 34 % | 26.3 % |
| District heating | 2 % | 2 % |
| Heat pump | 42 % | 26 % |
| Electricity | 3 % | 28 % |
| Wood | 9 % | 6.6 % |
| Solar thermal | 0 % | 2.5 % |
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
Type of heating system
- Boiler (unspecified)49.4 %
- Heat pump42.2 %
- Central electric heating3 %
- Condensing boiler1.7 %
- Stove1.7 %
- Heat exchanger (district)1.6 %
A standard non-condensing boiler is usually older and less efficient.
Renovations, heritage and volumes
For your renovation plans in Horw, official building registry data provides essential context. Regarding heritage protection, 503 out of 523 identified buildings are classified as protected, making it critical to contact the municipality early for permit requirements. The median building volume is 1003.5 m3 based on the SIA 416 standard, which dictates the scale of your insulation and heating projects. Please be aware that data coverage is partial for volume, as only 288 out of 1067 houses are measured using this standard. Information regarding the renovation year is currently unavailable for these properties.
503
buildings flagged as protected
status known for 523 of 2'080 buildings; check with the municipality
1'003.5 m³
median house volume (SIA 416)
measured for 288 of 1'067 houses
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
Analyze the feasibility of your project
The first step is to evaluate the suitability of your current system. First check whether your area can connect to a priority district heating network, as this solution may be prioritized according to local energy planning.
If a heat pump is selected, ensure that your existing distribution system, such as underfloor heating, is compatible. Effective building insulation remains the best way to minimize the required power capacity and guarantee maximum efficiency in the long term.
Sizing and required capacity
Properly sizing your new installation is crucial to ensure comfort and durability. The local design outdoor temperature sets the heat pump's capacity, allowing you to face the coldest winters without overconsumption.
A qualified installer must carry out a precise calculation of your home's heat loss. This sizing prevents frequent start-stop cycles, which wear out the compressor prematurely.
By perfectly adapting the pump to your actual needs, you optimize your investment and benefit from a constant yield throughout the appliance's lifespan.
Compliance with noise regulations
When choosing the location, it is recommended to prioritize an area far from bedrooms and property boundaries. The use of acoustic protection or the installation of soundproof hoods can also significantly reduce noise emissions.
Thoughtful planning avoids unnecessary disputes and ensures a harmonious integration of your equipment within your residential environment in Horw.
Project management and guidance
A successful installation relies on careful planning. Start by requesting several quotes to compare technical solutions and costs. Check the installers' skills and their experience with the chosen model.
Although no specific municipal grants are mentioned for Horw, stay attentive to cantonal incentive programs which evolve regularly.
A well-structured project includes not only the purchase of equipment but also the annual maintenance needed to ensure the system's durability.
Use the free RenoIndex service to obtain a reliable price range and start your energy renovation project with peace of mind.
Your project in 5 steps
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
Grants and subsidies
No specific grant listed for this work. Maintenance tax deductions may still apply.
Companies in the area
F. Imeri Sàrl
2829 Vermes · about 70.8 km
The website presented under the name Imeri Chauffage et Sanitaire Sàrl offers plumbing, heating and solar thermal work, while F. Imeri Sàrl’s registered purpose refers to a scrap metal business.
imeri-sarl.chEco6therm Sàrl
2832 Rebeuvelier · about 75.3 km
Eco6therm specializes in the installation of heating systems, particularly heat pumps, and solar photovoltaic energy solutions.
eco6therm.chSanit & Bilat Fils S.A.
2824 Vicques · about 76.4 km
Specialist since 1968 in sanitary installations, heating (gas, oil, wood, renewable energy), and tinsmithing with 24/7 emergency repair service.
sanit.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
Frequently asked questions
Where can I get a cost estimate?
You can use the free RenoIndex cost estimator to obtain a realistic price range for your project in Horw. This allows you to plan your budget before contacting professionals.
Is a heat pump suitable for all buildings?
Heat pumps are highly efficient, especially in well-insulated buildings. A low-temperature heat distribution system, such as underfloor heating, is ideal for maximizing your equipment's performance.
Are there financial grants for Horw?
It is recommended to check the official websites of the canton of Lucerne for available grants. Incentive programs often evolve, so it is advisable to check the current conditions before starting the work.
How can I limit heat pump noise?
To limit noise, choose a location away from neighbours and rest areas. Installing acoustic hoods or setting up natural noise barriers like hedges can also significantly reduce noise disturbances.
Works often combined in Horw
Other works in Horw
Kitchen renovationBathroom renovationNew flooringInterior paintingWindow replacementRoof renovationFacade insulationSolar panelsHome solar batterySolar water heatingTerrace constructionFence installationStairwell renovationElevator installation or upgrade