Heat pump installation · Horgen
At a glance
Small project
CHF 33'500 – CHF 61'400
Typical project
CHF 42'400 – CHF 78'900
Large project
CHF 55'600 – CHF 105'200
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 80 m² | CHF 33'500 | CHF 61'400 | CHF 600 |
| Typical project | 160 m² | CHF 42'400 | CHF 78'900 | CHF 400 |
| Large project | 280 m² | CHF 55'600 | CHF 105'200 | CHF 300 |
Computed with our estimator for Horgen (regional factor included), standard finish. Only the project size changes.
Included
Not included
In Horgen, the federal building register lists 3'309 residential buildings and 11'404 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
61 % built before 1980
Construction year does not reveal past renovations: check the current insulation condition.
30 % · Heat pump
This distribution describes recorded buildings, not your system's consumption or efficiency.
| Energy | Heating | Hot water |
|---|---|---|
| Gas | 23 % | 26.1 % |
| Heating oil | 25 % | 23.2 % |
| District heating | 14 % | 14.7 % |
| Heat pump | 30 % | 11.8 % |
| Electricity | 3 % | 18.3 % |
| Wood | 6 % | 3.9 % |
| Solar thermal | 0 % | 1.1 % |
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
A standard non-condensing boiler is usually older and less efficient.
For renovation projects in Horgen, RegBL data provides essential insights for homeowners. The median building volume is 992 m3 based on the SIA 416 standard for the 35 measured houses, which serves as a vital metric for scaling heating and insulation upgrades. Please be aware that data coverage regarding the renovation year and heritage protection is currently partial within the official register. Because this information is not fully comprehensive, we strongly advise contacting the municipality directly to clarify any potential architectural requirements or local permits needed for your property before beginning any major construction or renovation work.
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
First, check whether your area can connect to a priority district heating network. If a network solution is available, it may be more efficient than an individual pump. Otherwise, a heat pump remains a high-performance alternative.
Also, assess your building's current insulation, as a heat pump works ideally with low-temperature distribution systems like underfloor heating.
Proper insulation reduces the power required for your unit and optimizes your future energy savings over the entire lifespan of your new heating system.
The local design outdoor temperature determines the heat pump's capacity required to properly heat your home during cold peaks. This technical calculation is crucial to avoid excessive power consumption or premature compressor wear.
A qualified installer must perform a heat load calculation to precisely match the unit's power to your living space and actual needs.
This preparatory work ensures your comfort during cold winters in the Canton of Zurich and guarantees the best possible efficiency for your new heating system.
Quiet models with noise-reduction technology exist that make meeting noise limits much easier. If necessary, sound barriers can also be installed to minimize noise pollution, ensuring an installation that complies with local good neighborly requirements.
The cost of a heat pump depends on several factors, notably the technology chosen (air-water, geothermal), the complexity of the installation, and the necessary connection work.
To get a transparent estimate of prices charged by contractors in the Horgen area, use our free RenoIndex calculator. This tool will provide you with a personalized budget range in just a few clicks.
Remember to include in your financial planning the costs related to removing your old boiler, waste disposal, and any potential adjustments to your existing heating circuit to optimize overall efficiency.
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
No specific grant listed for this work. Maintenance tax deductions may still apply.
2829 Vermes · about 84.2 km
The website presented under the name Imeri Chauffage et Sanitaire Sàrl offers plumbing, heating and solar thermal work, while F. Imeri Sàrl’s registered purpose refers to a scrap metal business.
imeri-sarl.ch3988 Obergoms · about 85.4 km
Obergoms-based company specializing in sanitary installations, heating systems, roofing, and tinsmith work for new builds and renovations.
hallenbarter-russi.ch2824 Vicques · about 88.9 km
Specialist since 1968 in sanitary installations, heating (gas, oil, wood, renewable energy), and tinsmithing with 24/7 emergency repair service.
sanit.ch2824 Vicques · about 88.9 km
Buchwalder Sàrl in Vicques has specialized in the installation, repair, and renovation of heating and sanitary systems since 1966.
buchwalder-sarl.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
As a rule, the installation of a heat pump is subject to a notification or permit procedure in the Canton of Zurich. It is advisable to contact the local building department to verify the specific requirements applicable to your area before starting.
A well-maintained heat pump generally has a lifespan of 15 to 20 years. Regular maintenance by a certified professional is essential to ensure proper operation, prevent breakdowns, and maintain optimal energy efficiency throughout its entire period of service.
Yes, it is possible, but efficiency will be higher with low-temperature radiators or underfloor heating. If your house has traditional radiators, a heat load assessment is necessary to check if they can work efficiently at lower temperatures without sacrificing indoor comfort.
To get a realistic price range adapted to the Swiss market, use our free RenoIndex calculator. It allows you to estimate the costs of your heating project based on your specific situation, helping you plan your investment with confidence.
