Solar water heating · Glarus Süd
At a glance
Small project
CHF 10'300 – CHF 24'100
Typical project
CHF 13'200 – CHF 30'700
Large project
CHF 18'200 – CHF 41'800
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 3 m² | CHF 10'300 | CHF 24'100 | CHF 5'600 |
| Typical project | 6 m² | CHF 13'200 | CHF 30'700 | CHF 3'500 |
| Large project | 11 m² | CHF 18'200 | CHF 41'800 | CHF 2'600 |
Computed with our estimator for Glarus Süd (regional factor included), standard finish. Only the project size changes.
Included
Not included
In Glarus Süd, the federal building register lists 4'827 residential buildings and 6'788 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
79 % built before 1980
Construction year does not reveal past renovations: check the current insulation condition.
42 % · Wood
This distribution describes recorded buildings, not your system's consumption or efficiency.
| Energy | Heating | Hot water |
|---|---|---|
| Gas | 0 % | 1 % |
| Heating oil | 25 % | 15.6 % |
| District heating | 1 % | 0.4 % |
| Heat pump | 16 % | 5.4 % |
| Electricity | 16 % | 64.4 % |
| Wood | 42 % | 10.8 % |
| Solar thermal | 0 % | 1.4 % |
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
A standard non-condensing boiler is usually older and less efficient.
7.3 % of buildings mix housing with shops or offices.
For renovation projects in Glarus Süd, RegBL data provides essential benchmarks despite partial coverage. With 803 buildings measured according to SIA 416, the median volume of 460 m3 helps gauge the scale required for heating or insulation works. Please note that specific information regarding renovation years and heritage protection is not recorded in the current dataset. We strongly recommend contacting the municipality directly to discuss potential heritage constraints and verify your property's specific structural characteristics. Consulting local authorities early ensures your renovation plan remains compliant and helps you prepare an accurate budget before starting construction.
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
Solar thermal collectors are a proven solution for sanitary hot water production. During the summer, these systems usually cover a large portion of your hot water needs, allowing your main heating system to remain off.
This efficiency not only saves significantly on energy bills but also extends the life of your other equipment. Proper sizing is crucial to ensure optimal performance throughout the year, even though yields are naturally higher during sunny summer days.
Plan your installation carefully to achieve maximum energy production for your home.
For homeowners looking to maximize their energy independence, combining solar collectors with a heat pump is an attractive option. However, such a setup requires a rigorous sizing study.
The goal is to ensure a perfect synergy between the two systems without unnecessary costs. Professional expertise is essential to balance thermal load and energy storage.
By analyzing your actual needs, you can optimize the use of renewable energy and ensure long-term reliability for your domestic installation. Always consult a professional during the planning phase.
These subsidies can be in the form of amounts per square meter installed or fixed rates per installation, depending on the current guidelines. It is highly recommended to inquire before starting work, as eligibility conditions vary.
By using RenoIndex, you can get a better view of the overall costs, which will help you better anticipate the remaining balance after potential grants.
A successful solar thermal project in Glarus Süd requires meticulous planning. You must consider the orientation of your roof, the angle of the panels, and the current state of your hot water storage system.
A preliminary study helps avoid sizing errors that could reduce the profitability of your investment. In addition to technical aspects, consider the timeline and necessary permits.
RenoIndex is here to support you from the start by providing a reliable calculation basis for your renovation budget. Good preparation is the foundation for a smooth project.
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
No specific grant listed for this work. Maintenance tax deductions may still apply.
2829 Vermes · about 125.3 km
The website presented under the name Imeri Chauffage et Sanitaire Sàrl offers plumbing, heating and solar thermal work, while F. Imeri Sàrl’s registered purpose refers to a scrap metal business.
imeri-sarl.ch2832 Rebeuvelier · about 130.1 km
Eco6therm specializes in the installation of heating systems, particularly heat pumps, and solar photovoltaic energy solutions.
eco6therm.ch2824 Vicques · about 130.4 km
Specialist since 1968 in sanitary installations, heating (gas, oil, wood, renewable energy), and tinsmithing with 24/7 emergency repair service.
sanit.ch2824 Vicques · about 130.4 km
Buchwalder Sàrl in Vicques has specialized in the installation, repair, and renovation of heating and sanitary systems since 1966.
buchwalder-sarl.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
Yes, collectors work even in cold weather. However, the output is reduced compared to summer due to less sunshine and lower temperatures. A backup system is necessary to guarantee constant hot water throughout the year.
The surface area needed depends on the number of residents and your hot water needs. On average, count about 1 to 1.5 m² of collectors per person for a standard installation. A sizing study by a professional is recommended for optimal results.
A well-maintained solar thermal system can last between 20 and 25 years. The collectors are very durable, while components like the circulation pump or electronic controls may require replacement after 10 to 15 years of intensive use.
Most roofs are suitable, but a south orientation is ideal. A tilt between 30 and 45 degrees allows for the best efficiency. It is imperative to check the structural integrity of the roof and comply with local regulations before any installation.
