Solar water heating · Glarus Nord
At a glance
Small project
CHF 10'300 – CHF 24'100
Typical project
CHF 13'200 – CHF 30'700
Large project
CHF 18'200 – CHF 41'800
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 3 m² | CHF 10'300 | CHF 24'100 | CHF 5'600 |
| Typical project | 6 m² | CHF 13'200 | CHF 30'700 | CHF 3'500 |
| Large project | 11 m² | CHF 18'200 | CHF 41'800 | CHF 2'600 |
Computed with our estimator for Glarus Nord (regional factor included), standard finish. Only the project size changes.
Included
Not included
In Glarus Nord, the federal building register lists 5'099 residential buildings and 9'824 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
63 % built before 1980
Construction year does not reveal past renovations: check the current insulation condition.
41 % · Heating oil
This distribution describes recorded buildings, not your system's consumption or efficiency.
| Energy | Heating | Hot water |
|---|---|---|
| Gas | 12 % | 9.8 % |
| Heating oil | 41 % | 30.4 % |
| District heating | 2 % | 1 % |
| Heat pump | 19 % | 4.2 % |
| Electricity | 5 % | 43.1 % |
| Wood | 20 % | 9.5 % |
| Solar thermal | 0 % | 1.4 % |
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
A standard non-condensing boiler is usually older and less efficient.
9.3 % of buildings mix housing with shops or offices.
For your renovation plans in Glarus Nord, official RegBL figures provide useful benchmarks, although data coverage remains partial. The median building volume of 800.5 m3, measured according to SIA 416 standards for 50 out of 5099 buildings, helps you scale insulation and heating requirements. Additionally, the median renovation year for the single recorded building is 2016. Notably, no heritage protection is currently listed for the analyzed buildings. Given the limited scope of this data, we advise owners to contact the municipality early to confirm specific local regulations and requirements relevant to your property before starting any major work.
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
Solar thermal collectors usually cover much of summer hot water, which significantly relieves your main heating system during the sunny months.
By investing in this technology in Glarus Nord, you increase your property value while actively participating in the energy transition. This installation allows for substantial savings on your annual energy bills while limiting your carbon footprint.
A properly sized installation ensures peace of mind and increased durability for your primary heating equipment. Use RenoIndex to visualise the possible return on investment.
Planning your installation requires rigour. Combining collectors with a heat pump needs a sizing study to ensure that both systems work in perfect synergy.
It is essential to calculate the available roof area as well as the orientation and tilt to maximise yield. Incorrect sizing can lead to overheating in summer or insufficient production in winter.
Hiring certified professionals ensures that every component is optimised for your household's actual needs. Do not forget to consult the RenoIndex estimator for a reliable budget estimate.
Although there are no specific municipal grant programmes listed for Glarus Nord, it is advisable to regularly enquire with the competent cantonal authorities in the canton of Glarus.
These financial aids may vary and are often subject to specific technical conditions. It is recommended to submit your application before starting renovation work.
To plan your financing, use the RenoIndex estimator to get a realistic cost basis for your project.
Once installed, your solar thermal unit requires little maintenance, but periodic checks are essential to guarantee proper operation. It is advisable to check the heat transfer fluid and the system pressure every three to five years.
Regular maintenance helps prevent performance drops related to collector fouling or wear of mechanical components such as the pump. Rigorous monitoring ensures the durability of your installation and maintains optimal performance over the long term.
To anticipate maintenance costs, use the RenoIndex estimator which offers a global view of your investment.
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
No specific grant listed for this work. Maintenance tax deductions may still apply.
2829 Vermes · about 117.7 km
The website presented under the name Imeri Chauffage et Sanitaire Sàrl offers plumbing, heating and solar thermal work, while F. Imeri Sàrl’s registered purpose refers to a scrap metal business.
imeri-sarl.ch2832 Rebeuvelier · about 122.6 km
Eco6therm specializes in the installation of heating systems, particularly heat pumps, and solar photovoltaic energy solutions.
eco6therm.ch2824 Vicques · about 122.8 km
Specialist since 1968 in sanitary installations, heating (gas, oil, wood, renewable energy), and tinsmithing with 24/7 emergency repair service.
sanit.ch2824 Vicques · about 122.8 km
Buchwalder Sàrl in Vicques has specialized in the installation, repair, and renovation of heating and sanitary systems since 1966.
buchwalder-sarl.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
Solar thermal collectors typically have a lifespan of 20 to 25 years. The control system and pumps may require replacement after 15 years. Regular maintenance by a professional guarantees maximum longevity for all of your equipment.
Solar thermal is primarily designed for domestic hot water production and heating support. It generally cannot cover 100% of a home's heat needs in winter. It must therefore always be coupled with a main energy source such as a heat pump or a boiler.
To get a reliable estimate of supply and installation costs, use the free RenoIndex estimator. It considers various parameters to give you a price range tailored to your home. This will allow you to better budget for your energy renovation work.
The need for a building permit depends on the size of the installation and the zone of your building. It is recommended to contact the municipal planning department to confirm specific local regulations before starting your solar installation project.
