Eco6therm Sàrl
2832 Rebeuvelier · about 87.5 km
Eco6therm specializes in the installation of heating systems, particularly heat pumps, and solar photovoltaic energy solutions.
eco6therm.chSolar panels · Bülach

At a glance
Small project
CHF 10'000 – CHF 18'900
Typical project
CHF 18'500 – CHF 33'500
Large project
CHF 32'000 – CHF 56'800
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 5 kWc | CHF 10'000 | CHF 18'900 | CHF 2'800 |
| Typical project | 10 kWc | CHF 18'500 | CHF 33'500 | CHF 2'500 |
| Large project | 18 kWc | CHF 32'000 | CHF 56'800 | CHF 2'400 |
Computed with our estimator for Bülach (regional factor included), standard finish. Only the project size changes.
Included
Not included
In Bülach, the federal building register lists 2'304 residential buildings and 11'260 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
50 % built before 1980
Construction year does not reveal past renovations: check the current insulation condition.
41 % · Heat pump
This distribution describes recorded buildings, not your system's consumption or efficiency.
| Energy | Heating | Hot water |
|---|---|---|
| Gas | 12 % | 10.6 % |
| Heating oil | 38 % | 29.3 % |
| District heating | 1 % | 0.7 % |
| Heat pump | 41 % | 32.8 % |
| Electricity | 2 % | 20.2 % |
| Wood | 5 % | 2.9 % |
| Solar thermal | 0 % | 1.8 % |
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
A standard non-condensing boiler is usually older and less efficient.
11.5 % of buildings mix housing with shops or offices.
For your renovation projects in Bülach, the Federal Register of Buildings and Dwellings (RegBL) figures offer essential guidance. With 1 building officially listed as protected out of 2304 records, it is vital to contact the municipality early to address permit requirements. The median building volume stands at 727 m3 based on the SIA 416 standard, which is critical for scaling your heating or insulation upgrades. Please note that data coverage is partial, as the volume was specifically measured for only 237 out of the 994 houses registered. These metrics help you accurately estimate renovation costs and local regulatory needs.
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
The profitability of your solar installation depends primarily on your ability to maximize self-consumption. By producing your own electricity, you reduce reliance on the public grid and lower your monthly bills.
It is recommended to analyze your current consumption habits before sizing your system. The more energy you use during daylight hours, the faster the return on investment.
Use the RenoIndex calculator to get a price range and evaluate the financial viability of your specific project in Bülach.
Additionally, check regularly for potential incentives offered by the Canton of Zurich to encourage energy-related renovations. These aids, combined with rigorous planning, make solar energy very accessible for private owners.
For a reliable estimate of labor and material costs, use the free RenoIndex service.
However, you must ensure your project meets all current safety standards at the cantonal and federal levels. We recommend contacting local authorities to confirm the compliance of your installation before starting works.
Do not forget to use RenoIndex to budget your project accurately.
The success of your solar installation starts with a serious technical assessment. Begin by checking the condition of your roof and its orientation to maximize sunlight. Then, hire qualified professionals to evaluate your system's capacity.
Once the project is defined, proceed with the notification to the relevant authorities and submit your grant application to Pronovo. Finally, monitor the work closely to ensure a compliant installation.
To start, use the RenoIndex calculator to get a clear and calculated estimate of the necessary investments.
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
No specific grant listed for this work. Maintenance tax deductions may still apply.
2832 Rebeuvelier · about 87.5 km
Eco6therm specializes in the installation of heating systems, particularly heat pumps, and solar photovoltaic energy solutions.
eco6therm.ch2800 Delémont · about 92.4 km
Construction and renovation company in Delémont, specializing in masonry, sanitary facilities, heating, and turnkey projects in the Jura region.
adsconstruction.ch2800 Delémont · about 92.4 km
360 Comte Entreprise Générale SA provides comprehensive construction and renovation services with a focus on energy efficiency and photovoltaic installations.
360-comtesa.ch2800 Delémont · about 92.4 km
The Alvazzi Group provides comprehensive technical building services, including heating, plumbing, electrical, ventilation, and renewable energy solutions.
alvazzigroupe.comSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
Most roof-mounted solar installations are subject to a simple notification if they comply with federal integration standards. Always check with the cantonal building authorities to confirm if your specific project requires a particular permit according to local regulations.
The application for the federal one-off remuneration is made directly online via the Pronovo portal. Ensure you have all the technical documents for your finished installation ready for the file to facilitate the review of your application by the federal services.
The price varies depending on the size of your roof, the power of the panels, and the complexity of the work. To get a precise price range adapted to your house in Bülach, use the free estimation tool from RenoIndex.
Yes, solar panels are very efficient on flat roofs. The tilt can be adjusted using dedicated support structures to maximize sunlight all year round. Consult a certified installer to validate the technical feasibility of your project.