Solar water heating · Buchs (AG)
At a glance
Small project
CHF 9'200 – CHF 21'500
Typical project
CHF 11'800 – CHF 27'400
Large project
CHF 16'200 – CHF 37'300
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 3 m² | CHF 9'200 | CHF 21'500 | CHF 5'000 |
| Typical project | 6 m² | CHF 11'800 | CHF 27'400 | CHF 3'200 |
| Large project | 11 m² | CHF 16'200 | CHF 37'300 | CHF 2'300 |
Computed with our estimator for Buchs (AG) (regional factor included), standard finish. Only the project size changes.
Included
Not included
In Buchs (AG), the federal building register lists 1'433 residential buildings and 3'836 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
67 % built before 1980
Construction year does not reveal past renovations: check the current insulation condition.
41 % · Gas
This distribution describes recorded buildings, not your system's consumption or efficiency.
| Energy | Heating | Hot water |
|---|---|---|
| Gas | 41 % | 23.9 % |
| Heating oil | 29 % | 15.7 % |
| District heating | 2 % | 1.2 % |
| Heat pump | 22 % | 8.8 % |
| Electricity | 5 % | 47.2 % |
| Wood | 2 % | 1.6 % |
| Solar thermal | 0 % | 1.3 % |
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
A standard non-condensing boiler is usually older and less efficient.
4 % of buildings mix housing with shops or offices.
For your renovation project in Buchs (AG), the official building register (RegBL) indicates that 234 buildings out of 1433 recorded are under heritage protection. If your property is classified, contacting the municipality early is essential to navigate permit requirements. Please be aware that the data coverage for this area is partial, as specific figures regarding building volume and the year of the last renovation are not recorded in the register. We recommend verifying these technical details through your own property documentation to ensure accurate planning and budgeting for your future renovation works within the municipality.
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
Solar thermal energy uses solar radiation via collectors installed on your roof. These heat a heat transfer fluid that transfers the energy to a storage tank.
Solar thermal collectors usually cover much of summer hot water, reducing reliance on traditional heating systems during the warmer season. It is an ecological and sustainable solution for making the most of well-exposed roofs.
To get a precise quote for your installation in Buchs, use our free RenoIndex estimator, which provides a price range tailored to your specific situation.
The success of a solar installation depends on careful sizing. Combining collectors with a heat pump needs a sizing study to ensure optimal efficiency throughout the year.
An incorrectly calibrated system can lead to overheating in the summer or insufficient performance in the winter. It is advisable to consult a qualified professional to carry out a full thermal study of your building.
RenoIndex helps you anticipate this work by providing an overview of the budgets required for such equipment in the canton.
Although rules vary, it is crucial to inquire about current programs before starting work. To find out potential amounts in the canton of Aargau, check current conditions with the relevant authorities.
Do not forget to consult RenoIndex to estimate costs and better prepare your subsidy application.
Once installed, solar thermal systems require periodic maintenance to ensure their longevity and performance. This includes checking the heat transfer fluid, circuit pressure, and the condition of the collectors.
Regular maintenance prevents performance drops and extends the life of your investment by several years. Ensure that you include maintenance costs in your budget.
To get estimates on the total cost of such an installation, including maintenance, use the free RenoIndex simulator to guide you through your renovation steps.
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
No specific grant listed for this work. Maintenance tax deductions may still apply.
2829 Vermes · about 46.2 km
The website presented under the name Imeri Chauffage et Sanitaire Sàrl offers plumbing, heating and solar thermal work, while F. Imeri Sàrl’s registered purpose refers to a scrap metal business.
imeri-sarl.ch2824 Vicques · about 50 km
Buchwalder Sàrl in Vicques has specialized in the installation, repair, and renovation of heating and sanitary systems since 1966.
buchwalder-sarl.ch2824 Vicques · about 50 km
Specialist since 1968 in sanitary installations, heating (gas, oil, wood, renewable energy), and tinsmithing with 24/7 emergency repair service.
sanit.ch2824 Vicques · about 50 km
Gyger Haustechnik specializes in sanitary installations, heating systems, bathroom renovations, and tiling work.
gyger-co.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
Solar thermal is generally used as a supplement to a main heating system to produce hot water. It cannot completely replace a boiler, especially in winter, but it significantly reduces your annual energy consumption. Use RenoIndex to estimate your potential savings.
The surface area required depends on the size of your household and your hot water needs. In general, you should allow for 1 to 1.5 m² of collectors per person. A professional technical study is needed to define the exact sizing.
A well-maintained solar thermal system has an average lifespan of 20 to 25 years. Regular maintenance by a specialist ensures that your installation maintains its optimal performance throughout this period.
It is technically possible to install collectors in winter as long as weather conditions allow safe work on the roof. It is even a good time to plan your work before spring arrives. Check your needs with RenoIndex.
