360 Comte Entreprise Générale SA
2800 Delémont · about 30.1 km
360 Comte Entreprise Générale SA provides comprehensive construction and renovation services with a focus on energy efficiency and photovoltaic installations.
360-comtesa.chSolar panels · Birsfelden
Installing solar panels in Birsfelden
Are you planning to install solar panels on your roof in Birsfelden? It is a great way to lower your energy bills and contribute to the ecological transition. While every project is unique, understanding the technical and administrative basics is essential for your investment in the canton of Basel-Landschaft. Before starting your project, it is highly recommended to use the free RenoIndex estimator to get a precise CHF cost range for your solar installation and plan your home improvements with complete peace of mind.
At a glance
- Typical budget
- CHF 17'300 – CHF 31'400
- Midpoint
- CHF 23'700
- Grants found
- 0
- Nearby companies
- 4
Worked examples in Birsfelden
Small project
CHF 9'400 – CHF 17'700
Typical project
CHF 17'300 – CHF 31'400
Large project
CHF 30'000 – CHF 53'300
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 5 kWc | CHF 9'400 | CHF 17'700 | CHF 2'600 |
| Typical project | 10 kWc | CHF 17'300 | CHF 31'400 | CHF 2'400 |
| Large project | 18 kWc | CHF 30'000 | CHF 53'300 | CHF 2'200 |
Computed with our estimator for Birsfelden (regional factor included), standard finish. Only the project size changes.
Cost split (typical project)
- Labour : CHF 8'300 (35 %)
- Materials : CHF 13'000 (55 %)
- Other costs : CHF 2'400 (10 %)
What the price covers
Included
- Supply and installation
- VAT
- Inverter and grid connection
Not included
- Permits and architect fees
- Unexpected structural issues
- Possible subsidies
- Battery, roof refurbishment and structural reinforcement
Birsfelden's housing stock in figures
In Birsfelden, the federal building register lists 1'059 residential buildings and 5'787 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
Age of residential buildings
85 % built before 1980
- Before 191922 %
- 1919–194524 %
- 1946–196023 %
- 1961–197013 %
- 1971–19803 %
- 1981–19906 %
- 1991–20003 %
- 2001–20103 %
- Since 20114 %
Construction year does not reveal past renovations: check the current insulation condition.
Main heating energy
60 % · Gas
- Gas60 %
- Heating oil20 %
- District heating12 %
- Heat pump6 %
- Electricity1 %
- Wood1 %
This distribution describes recorded buildings, not your system's consumption or efficiency.
Heating and hot water: which energies?
| Energy | Heating | Hot water |
|---|---|---|
| Gas | 60 % | 49.8 % |
| Heating oil | 20 % | 13.4 % |
| District heating | 12 % | 11.8 % |
| Heat pump | 6 % | 6.1 % |
| Electricity | 1 % | 12.5 % |
| Wood | 1 % | 0.1 % |
| Solar thermal | 0 % | 6.2 % |
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
Type of heating system
- Boiler (unspecified)80.1 %
- Heat exchanger (district)12.3 %
- Heat pump6.4 %
- Central electric heating1.2 %
A standard non-condensing boiler is usually older and less efficient.
Houses or apartment buildings?
- Single-family houses38.6 %
- Two-dwelling houses9.2 %
- Apartment buildings (3+)52.2 %
11.9 % of buildings mix housing with shops or offices.
The typical building
- storeys (median)
- 3
- median footprint
- 109 m²
- median dwelling area
- 72 m²
Renovations, heritage and volumes
For homeowners planning renovations in Birsfelden, official RegBL figures provide critical insights. Out of 1059 total buildings, 196 are listed as protected heritage sites, meaning you must contact the municipality early to navigate specific permit requirements. Furthermore, volume data coverage is partial, with only 4 out of 409 houses measured according to the SIA 416 standard, showing a median volume of 680 m3. These figures are vital for estimating the scale of potential heating and insulation works, though users should be mindful that these specific measurement data reflect only a small portion of the total housing stock.
196
buildings flagged as protected
status known for 1'059 of 1'059 buildings; check with the municipality
680 m³
median house volume (SIA 416)
measured for 4 of 409 houses
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
Federal subsidies and solar grants
The amount depends on the installed capacity and the type of integration. It is advisable to submit your application before starting work to secure eligibility.
In addition to this federal support, ensure you regularly check the programs available in the canton of Basel-Landschaft, as support policies can change and may offer specific incentives for homeowners who want to switch to renewable energy sources.
Profitability and self-consumption
The profitability of a solar installation in Birsfelden depends mainly on your ability to use the electricity you produce. The higher your self-consumption rate, the less expensive electricity you buy from the grid.
To optimize your yield, consider smart usage, such as running your washing machine or charging your electric car during sunny hours. Efficient management helps amortize the cost of the panels faster.
To evaluate your global budget, do not hesitate to use the RenoIndex tool, which will provide you with a realistic price range tailored to your specific situation and help you anticipate long-term savings.
Regulatory aspects and urban planning
In Switzerland, rules regarding solar panels have been simplified to encourage their deployment. A suitably adapted roof installation is, in most cases, only subject to a simple notification process and not a full building permit.
However, it is essential to check the local conditions in the canton of Basel-Landschaft, especially if your building is listed or located in a protected area.
Careful preparation with your installer ensures compliance with all current technical standards to avoid any administrative delays or complications.
How to estimate your budget
The cost of a solar project can vary significantly depending on the roof size, module power, and technical complexity of the installation. It is important to obtain comparative quotes to avoid any unpleasant surprises.
RenoIndex offers a free estimator that allows you to get a precise price range in CHF for your project in Birsfelden. Using updated data, you can better define the initial investment required and calculate the payback period.
Take the time to compare offers carefully and consider the quality of the equipment, which will influence the durability of your solar system.
Your project in 5 steps
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
Grants and subsidies
No specific grant listed for this work. Maintenance tax deductions may still apply.
Companies in the area
ALVAZZI GROUPE SA, succursale de Delémont
2800 Delémont · about 30.1 km
The Alvazzi Group provides comprehensive technical building services, including heating, plumbing, electrical, ventilation, and renewable energy solutions.
alvazzigroupe.comADS Construction Sàrl
2800 Delémont · about 30.1 km
Construction and renovation company in Delémont, specializing in masonry, sanitary facilities, heating, and turnkey projects in the Jura region.
adsconstruction.chThermosan SA
2800 Delémont · about 30.1 km
Thermosan SA, based in Delémont and Moutier, specializes in heating systems, sanitary installations, and solar solutions, offering a 24/7 repair service.
thermo-san.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
Frequently asked questions
Do I need a building permit for my panels in Birsfelden?
A suitably adapted roof installation is generally only subject to a simple notification process. Check with the relevant authorities in the canton of Basel-Landschaft to confirm if your specific project requires additional steps, especially if your building is subject to specific local protection.
How does the one-off remuneration work?
The one-off remuneration is a federal grant paid by Pronovo. It reduces your initial investment for small solar systems. You should submit your file ideally before starting the work to benefit from this subsidy, subject to the conditions set by the federal government.
What influences the profitability of my system?
Profitability depends heavily on your self-consumption rate. By consuming the electricity produced directly at home instead of buying it from the grid, you maximize your savings. Optimize your energy-hungry appliances during the day to improve the financial return of your system.
Where can I get a cost estimate for my project?
Use the free RenoIndex estimator. This tool offers you a price range in CHF tailored to your needs, helping you plan your solar installation with peace of mind. It is a great starting point to evaluate your budget before requesting quotes from professionals.
Works often combined in Birsfelden
Home solar battery cost in BirsfeldenHeat pump installation cost in BirsfeldenRoof renovation cost in Birsfelden
Other works in Birsfelden
Kitchen renovationBathroom renovationNew flooringInterior paintingWindow replacementRoof renovationFacade insulationHeat pump installationHome solar batterySolar water heatingTerrace constructionFence installationStairwell renovationElevator installation or upgrade