Buchwalder Sàrl
2824 Vicques · about 22 km
Buchwalder Sàrl in Vicques has specialized in the installation, repair, and renovation of heating and sanitary systems since 1966.
buchwalder-sarl.chHeat pump installation · Arlesheim

At a glance
Small project
CHF 31'500 – CHF 57'500
Typical project
CHF 39'700 – CHF 74'000
Large project
CHF 52'100 – CHF 98'600
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 80 m² | CHF 31'500 | CHF 57'500 | CHF 500 |
| Typical project | 160 m² | CHF 39'700 | CHF 74'000 | CHF 300 |
| Large project | 280 m² | CHF 52'100 | CHF 98'600 | CHF 300 |
Computed with our estimator for Arlesheim (regional factor included), standard finish. Only the project size changes.
Included
Not included
In Arlesheim, the federal building register lists 1'917 residential buildings and 4'803 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
61 % built before 1980
Construction year does not reveal past renovations: check the current insulation condition.
55 % · Gas
This distribution describes recorded buildings, not your system's consumption or efficiency.
| Energy | Heating | Hot water |
|---|---|---|
| Gas | 55 % | 48.4 % |
| Heating oil | 18 % | 9.8 % |
| District heating | 10 % | 8.8 % |
| Heat pump | 15 % | 13.7 % |
| Electricity | 1 % | 12.5 % |
| Wood | 2 % | 0.5 % |
| Solar thermal | 0 % | 6.2 % |
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
A standard non-condensing boiler is usually older and less efficient.
For your renovation projects in Arlesheim, federal building registry data shows that 550 out of 1917 registered buildings are under heritage protection; it is therefore essential to contact the municipality early to clarify specific permit requirements. Regarding building volume, the median figure is 964 m3, based on a limited sample of 18 structures measured according to the SIA 416 standard out of 1264 houses. Please be aware that the data coverage for these volume calculations is only partial, which should be considered when assessing the scale of your intended heating or insulation works.
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
Before any installation, it is crucial to analyze your thermal needs. First, check whether your area can connect to a priority district heating network, a solution often preferred by authorities.
Then, have the local design outdoor temperature assessed, as it directly determines the required capacity of your heat pump. Correct sizing guarantees optimal performance throughout the year.
Use RenoIndex to estimate costs based on your building's specific features, ensuring a consistent financial plan from the very beginning of your project.
It is advisable to position the unit away from rest areas and, if necessary, install noise barriers.
Careful planning with a professional installer will allow you to choose a quiet model and comply with current regulations, ensuring good relations with your neighbours in Arlesheim.
Compliance with cantonal energy standards is often required. To avoid complications during your procedures, document your project precisely.
RenoIndex helps you anticipate the overall costs, including potential fees related to permit applications for your new heating installation.
Financial planning for such a project must take into account not only the purchase of the unit but also the costs of installation, connection, and adaptation of your heat distribution system, such as underfloor heating.
Prices can vary significantly depending on the technology chosen and the complexity of the work. By using our RenoIndex estimator, you will obtain a transparent price range for Arlesheim.
This allows you to prepare your budget with full knowledge and evaluate the long-term profitability of your energy investment.
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
No specific grant listed for this work. Maintenance tax deductions may still apply.
2824 Vicques · about 22 km
Buchwalder Sàrl in Vicques has specialized in the installation, repair, and renovation of heating and sanitary systems since 1966.
buchwalder-sarl.ch2824 Vicques · about 22 km
Gyger Haustechnik specializes in sanitary installations, heating systems, bathroom renovations, and tiling work.
gyger-co.ch2824 Vicques · about 22 km
Specialist since 1968 in sanitary installations, heating (gas, oil, wood, renewable energy), and tinsmithing with 24/7 emergency repair service.
sanit.ch2829 Vermes · about 22.4 km
The website presented under the name Imeri Chauffage et Sanitaire Sàrl offers plumbing, heating and solar thermal work, while F. Imeri Sàrl’s registered purpose refers to a scrap metal business.
imeri-sarl.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
Use the free RenoIndex estimator to get a realistic price range adapted to your situation. This tool considers your building's features and local specifics in Arlesheim to provide you with a reliable calculation basis for your quotes.
Yes, in most cases, a permit is required for installing a heat pump. Contact the technical services of your municipality to find out the exact procedure and the documents to submit before starting the work.
Capacity is mainly determined by the local design outdoor temperature, your house's insulation, and the area to be heated. A professional thermal study is recommended to correctly size your installation and guarantee optimal energy efficiency.
Choose a certified quiet model, position the unit away from bedroom windows, and use acoustic screens or dense vegetation to mitigate sound propagation. Always ensure compliance with the noise limits imposed by legislation.