Eco6therm Sàrl
2832 Rebeuvelier · about 21 km
Eco6therm specializes in the installation of heating systems, particularly heat pumps, and solar photovoltaic energy solutions.
eco6therm.chSolar panels · Aesch (BL)

At a glance
Small project
CHF 9'400 – CHF 17'700
Typical project
CHF 17'300 – CHF 31'400
Large project
CHF 30'000 – CHF 53'300
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 5 kWc | CHF 9'400 | CHF 17'700 | CHF 2'600 |
| Typical project | 10 kWc | CHF 17'300 | CHF 31'400 | CHF 2'400 |
| Large project | 18 kWc | CHF 30'000 | CHF 53'300 | CHF 2'200 |
Computed with our estimator for Aesch (BL) (regional factor included), standard finish. Only the project size changes.
Included
Not included
In Aesch (BL), the federal building register lists 2'136 residential buildings and 5'625 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
58 % built before 1980
Construction year does not reveal past renovations: check the current insulation condition.
51 % · Gas
This distribution describes recorded buildings, not your system's consumption or efficiency.
| Energy | Heating | Hot water |
|---|---|---|
| Gas | 51 % | 42 % |
| Heating oil | 25 % | 17 % |
| District heating | 12 % | 12.3 % |
| Heat pump | 9 % | 8.8 % |
| Electricity | 1 % | 14.1 % |
| Wood | 2 % | 0.7 % |
| Solar thermal | 0 % | 4.8 % |
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
A standard non-condensing boiler is usually older and less efficient.
6.3 % of buildings mix housing with shops or offices.
For your renovation plans in Aesch, the RegBL data shows that 745 buildings are protected by heritage status, requiring you to contact the municipality early to navigate permit regulations. Regarding scale, the building volume data covers 1570 houses with a median volume of 730 m3. However, since the volume measured according to the SIA 416 standard is available for only 30 buildings, the data coverage is partial. Please keep this limitation in mind when calculating the necessary scope for your heating or insulation upgrades to ensure your renovation budget and planning remain accurate for your specific home.
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
Profitability depends mainly on how much power you use on site. By optimizing your self-consumption, you significantly reduce the payback period of your system. It is advisable to analyze your consumption habits before sizing the system.
A preliminary study allows you to evaluate the orientation of your roof and the real solar potential. By combining these factors, you ensure efficient production throughout the year.
Use our RenoIndex tool to estimate the initial costs and visualize the financial impact of your investment in the canton of Basel-Landschaft.
In Switzerland, a suitably integrated roof system often only needs notification. This greatly simplifies administrative procedures for homeowners.
It is recommended, however, to verify your project's compliance with the competent authorities to avoid surprises. Although most standard systems are streamlined, certain protected zones may require specific permits.
Check with your municipality to confirm local rules. To anticipate costs related to these technical steps and components, consult our RenoIndex cost estimator for a reliable price range.
In addition to federal grants, it is wise to inquire about potential cantonal or municipal programs that could supplement your financing. Financial planning is a key step in your renovation project.
To get an overview of the required budget, do not hesitate to use our RenoIndex tool.
To ensure the success of your project, work with qualified installers who know regional specifics. Check the quality of panels and inverters to guarantee maximum durability.
Also, consider the aesthetic integration of your system on the roof to increase property value. Regular maintenance of the system is essential to maintain optimal production over the years.
By keeping these tips in mind and using RenoIndex to track your budget, you ensure the success of your energy transition. Start estimating your costs with RenoIndex today.
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
No specific grant listed for this work. Maintenance tax deductions may still apply.
2832 Rebeuvelier · about 21 km
Eco6therm specializes in the installation of heating systems, particularly heat pumps, and solar photovoltaic energy solutions.
eco6therm.ch2800 Delémont · about 21.8 km
360 Comte Entreprise Générale SA provides comprehensive construction and renovation services with a focus on energy efficiency and photovoltaic installations.
360-comtesa.ch2800 Delémont · about 21.8 km
Construction and renovation company in Delémont, specializing in masonry, sanitary facilities, heating, and turnkey projects in the Jura region.
adsconstruction.ch2800 Delémont · about 21.8 km
The Alvazzi Group provides comprehensive technical building services, including heating, plumbing, electrical, ventilation, and renewable energy solutions.
alvazzigroupe.comSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
The one-off remuneration (Pronovo) is a federal grant. You must submit an application to Pronovo before or after the start of work, depending on current guidelines. Ensure your system meets the technical criteria required by the Confederation to receive the payment after commissioning.
In Switzerland, roof solar systems are generally subject to a simple notification procedure rather than a building permit, provided they meet integration standards. However, check with your municipal administration to confirm there are no specific local requirements or restrictions linked to protected zones.
To maximize your self-consumption, try running energy-intensive appliances like the washing machine or dishwasher during peak solar production hours. Installing a home battery or using intelligent heat management are also effective solutions to use the energy produced at home.
The cost of an installation depends on its capacity, roof type, and the equipment chosen. To get a realistic price range tailored to your specific project, use our free online RenoIndex estimator. This will help you plan your budget accurately before requesting quotes.