RBM Electricité SA
1786 Sugiez · about 15.1 km
RBM Electricité SA is a Fribourg-based company specializing in electrical installations, home automation, and solar energy solutions.
rbmelectricite.chSolar panels · Wohlen bei Bern

At a glance
Small project
CHF 9'100 – CHF 17'200
Typical project
CHF 16'800 – CHF 30'500
Large project
CHF 29'100 – CHF 51'700
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 5 kWc | CHF 9'100 | CHF 17'200 | CHF 2'600 |
| Typical project | 10 kWc | CHF 16'800 | CHF 30'500 | CHF 2'300 |
| Large project | 18 kWc | CHF 29'100 | CHF 51'700 | CHF 2'200 |
Computed with our estimator for Wohlen bei Bern (regional factor included), standard finish. Only the project size changes.
Included
Not included
In Wohlen bei Bern, the federal building register lists 2'033 residential buildings and 4'538 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
59 % built before 1980
Construction year does not reveal past renovations: check the current insulation condition.
38 % · Heat pump
This distribution describes recorded buildings, not your system's consumption or efficiency.
| Energy | Heating | Hot water |
|---|---|---|
| Gas | 1 % | 1.9 % |
| Heating oil | 26 % | 30.4 % |
| District heating | 12 % | 4.9 % |
| Heat pump | 38 % | 12.1 % |
| Electricity | 7 % | 41 % |
| Wood | 16 % | 6.5 % |
| Solar thermal | 0 % | 3 % |
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
A standard non-condensing boiler is usually older and less efficient.
15.6 % of buildings mix housing with shops or offices.
For homeowners in Wohlen bei Bern, current data from the RegBL shows significant gaps in documentation. Because the renovation year and the building volume according to SIA 416 standards remain unmeasured or unknown for the majority of properties, planning insights are currently limited. Although zero buildings are explicitly listed as heritage protected, the status is unknown for most structures. Given this partial data coverage, it is essential to contact local municipal authorities early in your project. Clarifying these details directly ensures you understand local heritage requirements and structural constraints before proceeding with significant renovation or heating investments.
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
Installing solar panels allows you to produce renewable energy directly on your rooftop. Beyond the ecological impact, this technology provides effective protection against rising electricity prices over the long term.
In Switzerland, the profitability of your system depends mainly on the self-consumption rate, which is the amount of electricity you use instantly in your home. The more of your own power you consume, the faster your investment pays off.
It is recommended to adjust your usage habits to maximize the financial returns.
This helps speed up the commissioning of your project.
However, it is always wise to check local regulations regarding heritage protection or specific zoning rules before beginning your work to avoid any administrative hurdles and ensure a smooth approval process.
Financing your solar project can be optimized through federal support. The one-off remuneration managed by Pronovo is a key pillar of support in Switzerland. This grant helps significantly reduce your initial investment costs for small solar systems.
Additionally, remember to check for possible tax deductions for investments that promote energy efficiency. These national incentives are a great way to improve your project's profitability.
RenoIndex helps you by providing reliable cost estimates so you can plan your overall budget more effectively.
The success of a solar project depends on a thorough technical study. It is crucial to analyze the orientation of your roof and the solar potential of your home. Working with certified professionals ensures a safe and high-performance system.
Do not hesitate to request multiple quotes to compare offers. By using the RenoIndex estimator, you get a transparent cost estimate, allowing you to easily compare market prices.
Good planning ensures not only a durable installation but also optimal management of your future electricity production.
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
No specific grant listed for this work. Maintenance tax deductions may still apply.
1786 Sugiez · about 15.1 km
RBM Electricité SA is a Fribourg-based company specializing in electrical installations, home automation, and solar energy solutions.
rbmelectricite.ch2555 Brügg BE · about 17 km
AP-InTec Sàrl specializes in electrical installations, building automation, security systems, and the installation of photovoltaic solutions.
ap-intec.ch1784 Courtepin · about 18.9 km
Acertiel is a company specializing in the inspection, certification, and expertise of electrical and photovoltaic installations in Switzerland.
acertiel.ch2533 Evilard · about 20.2 km
Villars Elektro Sàrl in Evilard provides electrical installations for residential, industrial and commercial buildings, with services covering kitchen appliances, solar technology and charging stations.
villars-elektro.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
In Switzerland, you can benefit from the federal one-off remuneration via Pronovo, which helps fund a portion of your initial investment. This grant is particularly useful for reducing the costs of small residential solar installations.
Generally, a well-adapted roof-mounted solar installation does not require a building permit. A simple notification to the local authorities is usually sufficient. However, always check local specificities before starting your project.
The RenoIndex estimator is the ideal tool to quickly get a budget range in CHF. It takes into account the key factors of your project to give you a reliable and free estimate.
Profitability depends primarily on your self-consumption rate. By maximizing the use of energy produced on-site instead of feeding it back into the grid, you significantly improve the return on investment of your system.