Hallenbarter & Russi Gebäudetechnik AG
3988 Obergoms · about 133.4 km
Obergoms-based company specializing in sanitary installations, heating systems, roofing, and tinsmith work for new builds and renovations.
hallenbarter-russi.chRoof renovation · Wittenbach

At a glance
Small project
CHF 14'600 – CHF 33'500
Typical project
CHF 26'400 – CHF 58'300
Large project
CHF 44'200 – CHF 95'500
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 70 m² | CHF 14'600 | CHF 33'500 | CHF 300 |
| Typical project | 140 m² | CHF 26'400 | CHF 58'300 | CHF 300 |
| Large project | 245 m² | CHF 44'200 | CHF 95'500 | CHF 300 |
Computed with our estimator for Wittenbach (regional factor included), standard finish. Only the project size changes.
Included
Not included
In Wittenbach, the federal building register lists 1'521 residential buildings and 4'668 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
56 % built before 1980
Construction year does not reveal past renovations: check the current insulation condition.
46 % · Heating oil
This distribution describes recorded buildings, not your system's consumption or efficiency.
| Energy | Heating | Hot water |
|---|---|---|
| Gas | 1 % | 1.3 % |
| Heating oil | 46 % | 36.5 % |
| District heating | 10 % | 9.3 % |
| Heat pump | 36 % | 35.7 % |
| Electricity | 1 % | 11.5 % |
| Wood | 6 % | 3.2 % |
| Solar thermal | 0 % | 2.5 % |
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
A standard non-condensing boiler is usually older and less efficient.
8.2 % of buildings mix housing with shops or offices.
When planning renovations in Wittenbach, the Federal Register of Buildings and Dwellings (RegBL) offers essential yet partial insights for homeowners. Among the 1521 registered buildings, 41 are officially protected, while the status of 1473 remains unknown. Given this, it is crucial to contact the municipality early to navigate potential permit requirements. Please note that data for house volume and renovation years are not currently available in the system. Because these specific figures are missing, homeowners should verify building details directly with local authorities before initiating any renovation work to ensure full compliance with municipal regulations.
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
Efficient insulation limits thermal bridges and guarantees comfort in every season. Remember to check technical requirements for grant eligibility.
To structure your budget and better understand the expenses linked to insulation, consult the RenoIndex online simulator which will help you anticipate the total costs of your roofing project.
Existing solar panels must be removed and refitted : you must budget for this in your renovation project.
This technical operation requires the intervention of qualified professionals to guarantee the waterproofing and proper functioning of the system after the work. It is best to check the condition of the panels before reinstalling them.
Use the free RenoIndex estimator to obtain a global cost estimate including these specific services. Early planning helps avoid financial surprises during the roof renovation work.
At altitude, snow loads and frost significantly influence the choice of materials for your roof. It is essential to select solutions resistant to local weather conditions to ensure the longevity of your covering.
An adapted roof effectively protects against infiltration and structural damage. Discuss material options with a professional to make the best technical choice.
You can consult the RenoIndex price ranges to compare the costs of different types of materials available on the Swiss market.
A successful renovation starts with a precise assessment of needs. Before starting, have a complete diagnosis carried out by an expert to identify the weak points of your roof. This allows you to draw up a detailed quote and plan the work with peace of mind.
Do not forget to include indirect costs such as scaffolding and waste management. To quickly obtain an estimate of total costs, the RenoIndex calculator is a valuable tool that offers you a clear vision adapted to the prices charged in Switzerland.
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
No specific grant listed for this work. Maintenance tax deductions may still apply.
3988 Obergoms · about 133.4 km
Obergoms-based company specializing in sanitary installations, heating systems, roofing, and tinsmith work for new builds and renovations.
hallenbarter-russi.ch2827 Mervelier · about 139.6 km
Dubach Construction Bois Sàrl specializes in timber construction, roofing, and insulation services.
solubois.ch2747 Seehof · about 142.9 km
Welibois S.A. is a company specializing in carpentry, joinery, insulation, and sawmill services.
welibois.ch2746 Crémines · about 146.6 km
Specialized company for painting, facade renovation, surface cleaning, and wood treatment for both interior and exterior residential projects.
malerei-top-demestre.comSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
Look for signs of wear such as broken tiles, water leaks, or failing insulation. An annual diagnosis by a professional roofer is recommended to detect invisible infiltrations. RenoIndex can help you estimate the cost of necessary repairs.
Always check the eligibility conditions of the Buildings Programme before signing a quote. You must generally submit your application before the start of work. Consult official cantonal platforms for the required forms to support your renovation project.
Absolutely. The choice between terracotta tiles, concrete, or slate strongly influences the final price. Premium materials increase durability and aesthetics, but also the initial investment. Use the RenoIndex simulator to compare price ranges by material type.
The duration depends on the surface and complexity of the work, such as insulation or solar installation. On average, expect a few days to several weeks. A clear schedule from your partner company will allow you to better anticipate the stages of this project.