Hallenbarter & Russi Gebäudetechnik AG
3988 Obergoms · about 83.9 km
Obergoms-based company specializing in sanitary installations, heating systems, roofing, and tinsmith work for new builds and renovations.
hallenbarter-russi.chBathroom renovation · Wädenswil

At a glance
Small project
CHF 12'900 – CHF 35'800
Typical project
CHF 17'500 – CHF 47'000
Large project
CHF 25'200 – CHF 65'500
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 3 m² | CHF 12'900 | CHF 35'800 | CHF 7'400 |
| Typical project | 6 m² | CHF 17'500 | CHF 47'000 | CHF 4'900 |
| Large project | 11 m² | CHF 25'200 | CHF 65'500 | CHF 3'700 |
Computed with our estimator for Wädenswil (regional factor included), standard finish. Only the project size changes.
Included
Not included
In Wädenswil, the federal building register lists 3'756 residential buildings and 12'624 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
63 % built before 1980
Construction year does not reveal past renovations: check the current insulation condition.
37 % · Gas
This distribution describes recorded buildings, not your system's consumption or efficiency.
For your renovation plans in Wädenswil, the federal building register provides important insights for your project. The median house volume is 497 m3 according to the SIA 416 standard, which is essential for scaling heating and insulation works. Please note that this volume data is based on a very limited coverage of only two buildings out of 2128. Regarding heritage status, 53 buildings are identified as known. We recommend contacting the municipality early to clarify any specific permit requirements or restrictions for your property, ensuring that your renovation project proceeds smoothly while respecting the local building regulations.
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
Renovating a bathroom in Wädenswil starts with a precise assessment of the available space. If you are planning to swap a bathtub for a walk-in shower, it is crucial to check the available drain slope in the floor beforehand.
Poor preparation can lead to major technical complications later. Also, consider the water hardness in the canton of Zurich, which causes scale to build up quickly on fittings and screens.
Choosing anti-limescale materials or easy-clean surfaces will save you significant time during weekly maintenance and keep your bathroom looking new.
The duration of the work is a key factor for your daily routine. Expect roughly two to four weeks of construction time during which your bathroom will be unusable. During this period, it is essential to have an alternative arrangement in place.
Coordinating different trades, such as plumbers and electricians, is crucial to avoid downtime. To estimate your project costs, remember to use the RenoIndex tool.
It will help you anticipate the budget needed according to Swiss standards, saving you from unpleasant surprises when it comes time to settle the final invoices.
Choosing your equipment requires balancing aesthetics with daily usage. In the canton of Zurich, high-quality fittings resist limescale deposits much better.
Opt for wall-mounted furniture that clears the floor space, facilitating cleaning and creating an impression of space, even in smaller bathrooms. Lighting also plays a vital role in creating a relaxing atmosphere.
Use the RenoIndex estimator to compare the prices of various fittings and sanitary ware on the Swiss market. Premium installation represents a higher initial investment but ensures long-term peace of mind.
Working with local professionals is the best guarantee for compliance with Swiss standards. The construction sector requires particular rigor, especially regarding waterproofing and electrical installations.
Ensure all work complies with current technical guidelines. If you are unsure about the overall budget needed to meet these quality standards, our RenoIndex tool is available for free.
It provides a realistic range based on Swiss data, allowing you to discuss your project with contractors confidently and ensuring the flawless execution of your renovations.
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
No specific grant listed for this work. Maintenance tax deductions may still apply.
3988 Obergoms · about 83.9 km
Obergoms-based company specializing in sanitary installations, heating systems, roofing, and tinsmith work for new builds and renovations.
hallenbarter-russi.ch2829 Vermes · about 89.3 km
The website presented under the name Imeri Chauffage et Sanitaire Sàrl offers plumbing, heating and solar thermal work, while F. Imeri Sàrl’s registered purpose refers to a scrap metal business.
imeri-sarl.ch2824 Vicques · about 94.1 km
Specialist since 1968 in sanitary installations, heating (gas, oil, wood, renewable energy), and tinsmithing with 24/7 emergency repair service.
sanit.ch2824 Vicques · about 94.1 km
Buchwalder Sàrl in Vicques has specialized in the installation, repair, and renovation of heating and sanitary systems since 1966.
buchwalder-sarl.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
Generally, expect between two to four weeks for a complete renovation. During this time, the bathroom is not usable. Good preparation with your tradespeople will help limit unexpected delays.
Hard water causes limescale. Prioritize fittings with anti-limescale treatments, shower screens with special coatings, and easy-clean surfaces to reduce the amount of weekly maintenance required.
Yes, use the free RenoIndex simulator. It provides a price range in Swiss francs adapted to renovation work in Switzerland to help you plan your budget effectively.
The critical point for a walk-in shower is the drain slope. It must be sufficient to prevent water from stagnating. Always verify the technical feasibility before starting your construction work.