J. Zornio S.A.
2826 Corban · about 54.1 km
Based in Corban, family-owned J. Zornio SA carries out masonry, reinforced concrete work, interior renovations, tiling and outdoor landscaping throughout the Jura.
zornio.chNew flooring · Reinach (AG)

At a glance
Small project
CHF 3'100 – CHF 7'800
Typical project
CHF 5'800 – CHF 13'700
Large project
CHF 9'800 – CHF 22'700
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 25 m² | CHF 3'100 | CHF 7'800 | CHF 200 |
| Typical project | 50 m² | CHF 5'800 | CHF 13'700 | CHF 200 |
| Large project | 88 m² | CHF 9'800 | CHF 22'700 | CHF 200 |
Computed with our estimator for Reinach (AG) (regional factor included), standard finish. Only the project size changes.
Included
Not included
In Reinach (AG), the federal building register lists 1'806 residential buildings and 4'757 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
60 % built before 1980
Construction year does not reveal past renovations: check the current insulation condition.
60 % · Heating oil
This distribution describes recorded buildings, not your system's consumption or efficiency.
For your renovation plans in Reinach, official building data provides critical context. Out of 1806 total buildings, 420 are under heritage protection, necessitating early consultation with local authorities regarding permits. Regarding project scale, the median building volume is 789 m3 based on the SIA 416 standard. Please note that data coverage is partial, as volume metrics are recorded for only 4 out of 1236 houses. These figures serve as a foundational guide for homeowners to understand the specific regulatory environment and structural scale required when planning insulation or heating upgrades within the municipality.
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
Before installing new flooring, the state of your current floor must be carefully examined. The existing base, whether it is a screed or old tiles, often determines the final cost of your project much more than the chosen surface material.
Leveling may be necessary to ensure a durable and aesthetic installation. Do not neglect this preparatory step, as it directly influences the stability of the future covering and avoids future problems such as cracks or unpleasant irregularities.
It is imperative to consult your regulations before starting work to know the acoustic standards imposed.
Choosing a suitable underlay helps reduce impact noise, thus ensuring superior living comfort while respecting your legal obligations within your condominium.
The presence of underfloor heating significantly influences your flooring options. With underfloor heating, it is essential to choose a compatible, low-insulation covering to allow optimal heat diffusion in your rooms.
Some parquet or synthetic coverings can block thermal diffusion if they are too thick or insulating. Always check the technical sheet of the materials under consideration.
Good thermal conductivity will allow you to maintain a pleasant temperature while optimizing your daily energy consumption in your home.
Estimating the cost of a floor renovation can be complex, between the price of materials, labor, and the necessary preparation work. To help you see things more clearly, use the RenoIndex calculator.
This free tool provides you with an estimated price range based on your specific needs and the realities of the local market.
By integrating variables such as surface area, material type, and the technical constraints of Reinach, you will have a solid foundation to request quotes from artisans and carry out your project with peace of mind.
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
No specific grant listed for this work. Maintenance tax deductions may still apply.
2826 Corban · about 54.1 km
Based in Corban, family-owned J. Zornio SA carries out masonry, reinforced concrete work, interior renovations, tiling and outdoor landscaping throughout the Jura.
zornio.ch2824 Vicques · about 57.6 km
Carpentry business in Vicques specializing in custom fittings, parquet flooring, windows, doors, and interior and exterior woodwork.
dom-menuiserie.ch2824 Vicques · about 57.6 km
Gyger Haustechnik specializes in sanitary installations, heating systems, bathroom renovations, and tiling work.
gyger-co.ch2824 Vicques · about 57.6 km
Menuiserie Voisard specializes in interior carpentry, cabinetmaking, parquet flooring, window installation, and the manufacturing of staircases.
menuiserievoisard.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
The process begins with evaluating the base, followed by choosing a covering compatible with your heating or insulation. Then, the floor must be leveled if necessary before professional installation. Do not forget to consult your condominium regulations if you live in an apartment building.
Yes, it is highly recommended to choose materials with low thermal resistance for good conductivity. Coverings like tiles or certain vinyls are excellent. Always check the compatibility of the selected material with low-temperature heating systems.
In an apartment, sound insulation is often a requirement of the condominium regulations in Reinach. It is essential to limit impact noise to the floors below. Always check your building's specific requirements before choosing your underlay.
Use the RenoIndex calculator for free. By entering information about your project in Reinach, you will quickly obtain a realistic price range for your flooring replacement work.