Eco6therm Sàrl
2832 Rebeuvelier · about 89.1 km
Eco6therm specializes in the installation of heating systems, particularly heat pumps, and solar photovoltaic energy solutions.
eco6therm.chSolar panels · Kloten

At a glance
Small project
CHF 10'000 – CHF 18'900
Typical project
CHF 18'500 – CHF 33'500
Large project
CHF 32'000 – CHF 56'800
| Project | Quantity | Low | High | Per unit |
|---|---|---|---|---|
| Small project | 5 kWc | CHF 10'000 | CHF 18'900 | CHF 2'800 |
| Typical project | 10 kWc | CHF 18'500 | CHF 33'500 | CHF 2'500 |
| Large project | 18 kWc | CHF 32'000 | CHF 56'800 | CHF 2'400 |
Computed with our estimator for Kloten (regional factor included), standard finish. Only the project size changes.
Included
Not included
In Kloten, the federal building register lists 1'952 residential buildings and 10'956 dwellings. These municipal benchmarks help put your home in context, but do not replace an individual assessment.
56 % built before 1980
Construction year does not reveal past renovations: check the current insulation condition.
49 % · Heating oil
This distribution describes recorded buildings, not your system's consumption or efficiency.
| Energy | Heating | Hot water |
|---|---|---|
| Gas | 12 % | 9.5 % |
| Heating oil | 49 % | 39.3 % |
| District heating | 4 % | 3.5 % |
| Heat pump | 28 % | 21.6 % |
| Electricity | 1 % | 19.1 % |
| Wood | 6 % | 4.5 % |
Each line gives the share of buildings using that energy, separately for heating and for hot water. The two columns do not always reach 100%: some buildings combine two systems, or reported none.
A standard non-condensing boiler is usually older and less efficient.
11.8 % of buildings mix housing with shops or offices.
For your renovation plans in Kloten, the federal building register data provides essential insights. With a median building volume of 748 m3 according to the SIA 416 standard, you can better estimate the scope of required heating or insulation works. Please note that the data coverage for volume is partial, as only 23 buildings have been officially measured out of 814 recorded houses. These figures allow you to assess renovation costs more accurately by aligning your budget and technical planning with the actual size of your property and the specific standards applicable within this municipality.
Source : OFS — RegBL (export communal complet). Existing residential buildings; percentages of recorded values.
Switching to solar power allows you to turn your roof into a sustainable energy source. By generating your own electricity, you protect yourself against volatile market prices.
Since profitability depends mainly on how much power you use on site, maximizing self-consumption is key. In Switzerland, the federal one-off remuneration via Pronovo helps lower the initial investment for small systems.
RenoIndex supports you in this process by providing the necessary cost ranges to accurately calculate your total solar investment.
However, it is recommended to verify the compliance of your project with local rules before starting work.
Do not forget to check RenoIndex for an overview of estimated costs, which will facilitate the preparation of your financial and technical documentation.
To maximize return on investment, optimizing your energy consumption is crucial. A well-sized photovoltaic system can cover a significant part of your daily needs.
Adding a storage battery can increase this self-consumption rate, especially during non-sunny hours. Although this increases the initial investment, the long-term gain is often significant.
Use our RenoIndex calculator to compare costs based on your system size and decide on the best configuration suited to your budget.
Planning is the most important step to ensure the success of your photovoltaic project. First, evaluate the orientation and condition of your roof, as these factors directly influence energy yield.
Then, call on qualified professionals to provide a detailed quote. To ensure your budget is realistic, use the free RenoIndex estimator.
This will help you obtain a reliable price range and avoid financial surprises during the implementation of your installation in Kloten.
1. Estimate
Set a budget range with the estimator.
2. Grants
Apply before work starts.
3. Quotes
Compare at least 3 quotes.
4. Permit
Check with the municipality whether a permit is needed.
5. Works
Follow the site and do a written handover.
No specific grant listed for this work. Maintenance tax deductions may still apply.
2832 Rebeuvelier · about 89.1 km
Eco6therm specializes in the installation of heating systems, particularly heat pumps, and solar photovoltaic energy solutions.
eco6therm.ch2740 Moutier · about 94.4 km
Moutier-based company specializing in tinsmithing, roofing, ventilated facades, and solar panel installation.
zbinden-joye.ch2740 Moutier · about 94.4 km
Company in Moutier specializing in plumbing, heating (oil, wood, heat pumps), and solar thermal and photovoltaic solutions.
bmonnerat.ch2800 Delémont · about 94.6 km
Construction and renovation company in Delémont, specializing in masonry, sanitary facilities, heating, and turnkey projects in the Jura region.
adsconstruction.chSuggestions from the commercial register by distance and activity. Not an endorsement or partnership.
Most roofs facing south, east, or west are efficient. It is advisable to check for excessive shading and the state of the structure. Use RenoIndex to estimate costs and hire a local installer for an in-depth technical analysis of your available surface area.
At the federal level, the one-off remuneration managed by Pronovo is the main support for small systems. It helps cover part of the investment costs. Check official websites for current conditions and use RenoIndex to get a clear estimate of your remaining costs.
In most cases, roof-integrated solar installations only require notification. However, check specific requirements with the relevant Kloten authorities. RenoIndex helps you anticipate the necessary budget, including potential costs related to the compliance of your solar installation.
To estimate the total cost of your project, use the free RenoIndex simulator. It will provide a price range based on your type of installation. Remember to include labor and material costs for a complete overview of your energy investment.